greatgalleons Posted April 21, 2014 Author #271 Posted April 21, 2014 (edited) Hey Brian or should I say mr. President according to your photo , I use wood glue on all of the wood. Around the cannon ports and sweeps. I have a length of wood dowel of 5 inches with a needle at one end to apply small amounts of wood glue. Edited April 21, 2014 by greatgalleons Quote
Don Quixote Posted April 21, 2014 #272 Posted April 21, 2014 REAL small amounts! I have some scrap wood and I took a small strip of 1/32 and tried my watered down glue idea. It doesn't leave leave any residue from glue squeezing out but I'm hesitant to trust it to be as strong. Whataya think? Think it'll be as strong? I'll try your idea but sometimes my hands shake just a little too much. Brian Pete Jaquith 1 Quote Norwegian Sailing Pram 1:12 Scale. 2nd boat in the learning series. In Dry Dock: Muscongus Bay Lobster Smack. 1:24 scale. Model Shipways, 3rd in the learning series. Not sure what'll be next, probably the Santa Maria by Artesania Latina 1:65 scale. Unless someone has a better suggestion for a beginner. Pride of Baltimore. Model Shipways. Clipper used in the war of 1812. Black Falcon. Mantua Model. 18 century corsair brig. CSS. Alabama. E. Manolie? Can't read the font. Build in Liverpool in 1862 for use in the American Civil War by the Confederates. Steam and sail, sloop of war. Of all the things I've lost, I miss my mind the most. A baseball cap my Dad wore.
greatgalleons Posted April 21, 2014 Author #273 Posted April 21, 2014 Some small pieces of wood I pick up with the tip of an exacto blade to position on the glued areas. Quote
Don Quixote Posted April 21, 2014 #274 Posted April 21, 2014 Hey, now we're talking. Alligator clip to hold it in place and pull the knife out. In other cases I can use those bent pins. Put them in, and rotate them onto the part when the part is where I want it. THANKS! Brian Quote Norwegian Sailing Pram 1:12 Scale. 2nd boat in the learning series. In Dry Dock: Muscongus Bay Lobster Smack. 1:24 scale. Model Shipways, 3rd in the learning series. Not sure what'll be next, probably the Santa Maria by Artesania Latina 1:65 scale. Unless someone has a better suggestion for a beginner. Pride of Baltimore. Model Shipways. Clipper used in the war of 1812. Black Falcon. Mantua Model. 18 century corsair brig. CSS. Alabama. E. Manolie? Can't read the font. Build in Liverpool in 1862 for use in the American Civil War by the Confederates. Steam and sail, sloop of war. Of all the things I've lost, I miss my mind the most. A baseball cap my Dad wore.
Don Quixote Posted April 21, 2014 #275 Posted April 21, 2014 I thought the president was... JustBlowinInTheWind. I have a great picture - or should I say apropos - of Sarah Palin I'll change it to soon too. Quote Norwegian Sailing Pram 1:12 Scale. 2nd boat in the learning series. In Dry Dock: Muscongus Bay Lobster Smack. 1:24 scale. Model Shipways, 3rd in the learning series. Not sure what'll be next, probably the Santa Maria by Artesania Latina 1:65 scale. Unless someone has a better suggestion for a beginner. Pride of Baltimore. Model Shipways. Clipper used in the war of 1812. Black Falcon. Mantua Model. 18 century corsair brig. CSS. Alabama. E. Manolie? Can't read the font. Build in Liverpool in 1862 for use in the American Civil War by the Confederates. Steam and sail, sloop of war. Of all the things I've lost, I miss my mind the most. A baseball cap my Dad wore.
greatgalleons Posted April 21, 2014 Author #276 Posted April 21, 2014 (edited) I,m not going say much on that subject Brian, after all I am from a Red State. Edited April 21, 2014 by greatgalleons Quote
Don Quixote Posted April 21, 2014 #277 Posted April 21, 2014 Lol! I only get the blues every 2 years. Quote Norwegian Sailing Pram 1:12 Scale. 2nd boat in the learning series. In Dry Dock: Muscongus Bay Lobster Smack. 1:24 scale. Model Shipways, 3rd in the learning series. Not sure what'll be next, probably the Santa Maria by Artesania Latina 1:65 scale. Unless someone has a better suggestion for a beginner. Pride of Baltimore. Model Shipways. Clipper used in the war of 1812. Black Falcon. Mantua Model. 18 century corsair brig. CSS. Alabama. E. Manolie? Can't read the font. Build in Liverpool in 1862 for use in the American Civil War by the Confederates. Steam and sail, sloop of war. Of all the things I've lost, I miss my mind the most. A baseball cap my Dad wore.
greatgalleons Posted April 27, 2014 Author #278 Posted April 27, 2014 placed the foremast , some work on the bowsprit Aussie048 and MarisStella.hr 2 Quote
greatgalleons Posted April 27, 2014 Author #279 Posted April 27, 2014 (edited) bowsprit ratlines, these are harder than it looks, good luck brian. Edited April 27, 2014 by greatgalleons MarisStella.hr, Aussie048, JesseLee and 1 other 4 Quote
patrickmil Posted April 27, 2014 #280 Posted April 27, 2014 Incredibly clean rigging. Very well done! Quote Thanks, Patrick YouTube Channel for fun: Patrick's Scale Studio Finished: Model Shipways US Brig Niagara I Love Kit USS Curtis Wilbur DDG-54 Current: Trumpeter USS Yorktown CV-5
greatgalleons Posted April 29, 2014 Author #281 Posted April 29, 2014 fore mast stays Aussie048, mij, KenW and 3 others 6 Quote
patrickmil Posted April 30, 2014 #282 Posted April 30, 2014 Incredible work. The stays look great! I might also mention, you work fairly fast. Niagara is looking very nice. Quote Thanks, Patrick YouTube Channel for fun: Patrick's Scale Studio Finished: Model Shipways US Brig Niagara I Love Kit USS Curtis Wilbur DDG-54 Current: Trumpeter USS Yorktown CV-5
Don Quixote Posted May 10, 2014 #283 Posted May 10, 2014 Painted the waterways and planksheer, I tried Humbrol paint but it was too thin a paint and did not cover the scorch marks from the lazer cutting. I went with Testors Matt color since it was thicker and covered the scorched marks. I should have paid more attention to the image that showed the cans. Probably because I spent some 35 years building plastic everything, I went with testors enamel. Nice and thick. Looks like crap. Exactly what is that paint you used so I can order some and figure out how to sand all the paint off. Quote Norwegian Sailing Pram 1:12 Scale. 2nd boat in the learning series. In Dry Dock: Muscongus Bay Lobster Smack. 1:24 scale. Model Shipways, 3rd in the learning series. Not sure what'll be next, probably the Santa Maria by Artesania Latina 1:65 scale. Unless someone has a better suggestion for a beginner. Pride of Baltimore. Model Shipways. Clipper used in the war of 1812. Black Falcon. Mantua Model. 18 century corsair brig. CSS. Alabama. E. Manolie? Can't read the font. Build in Liverpool in 1862 for use in the American Civil War by the Confederates. Steam and sail, sloop of war. Of all the things I've lost, I miss my mind the most. A baseball cap my Dad wore.
greatgalleons Posted May 10, 2014 Author #284 Posted May 10, 2014 Hey Brian when I use testors paint I like to thin it a little with testors enamel paint thinner. Humbrol paint is good but be sure to mix it well, it settles to the bottom of the little can it comes in. Shaking the can will not work , use a little stir stick. Quote
Don Quixote Posted May 11, 2014 #285 Posted May 11, 2014 I saw that you said you had a lot of wood left over. By any chance was any the planking around the gun ports and sweeps? If so, I'll pay for shipping on whatever you have. Brian Quote Norwegian Sailing Pram 1:12 Scale. 2nd boat in the learning series. In Dry Dock: Muscongus Bay Lobster Smack. 1:24 scale. Model Shipways, 3rd in the learning series. Not sure what'll be next, probably the Santa Maria by Artesania Latina 1:65 scale. Unless someone has a better suggestion for a beginner. Pride of Baltimore. Model Shipways. Clipper used in the war of 1812. Black Falcon. Mantua Model. 18 century corsair brig. CSS. Alabama. E. Manolie? Can't read the font. Build in Liverpool in 1862 for use in the American Civil War by the Confederates. Steam and sail, sloop of war. Of all the things I've lost, I miss my mind the most. A baseball cap my Dad wore.
Don Quixote Posted May 11, 2014 #286 Posted May 11, 2014 Once again, thank you! Quote Norwegian Sailing Pram 1:12 Scale. 2nd boat in the learning series. In Dry Dock: Muscongus Bay Lobster Smack. 1:24 scale. Model Shipways, 3rd in the learning series. Not sure what'll be next, probably the Santa Maria by Artesania Latina 1:65 scale. Unless someone has a better suggestion for a beginner. Pride of Baltimore. Model Shipways. Clipper used in the war of 1812. Black Falcon. Mantua Model. 18 century corsair brig. CSS. Alabama. E. Manolie? Can't read the font. Build in Liverpool in 1862 for use in the American Civil War by the Confederates. Steam and sail, sloop of war. Of all the things I've lost, I miss my mind the most. A baseball cap my Dad wore.
Don Quixote Posted May 16, 2014 #287 Posted May 16, 2014 Are you alive and well? You haven't been on here in awhile. Did the admiral ground you? Brian Quote Norwegian Sailing Pram 1:12 Scale. 2nd boat in the learning series. In Dry Dock: Muscongus Bay Lobster Smack. 1:24 scale. Model Shipways, 3rd in the learning series. Not sure what'll be next, probably the Santa Maria by Artesania Latina 1:65 scale. Unless someone has a better suggestion for a beginner. Pride of Baltimore. Model Shipways. Clipper used in the war of 1812. Black Falcon. Mantua Model. 18 century corsair brig. CSS. Alabama. E. Manolie? Can't read the font. Build in Liverpool in 1862 for use in the American Civil War by the Confederates. Steam and sail, sloop of war. Of all the things I've lost, I miss my mind the most. A baseball cap my Dad wore.
greatgalleons Posted May 16, 2014 Author #288 Posted May 16, 2014 Putting the build on hold for a few weeks until I return home. Quote
greatgalleons Posted June 2, 2014 Author #289 Posted June 2, 2014 finished pics realworkingsailor, MEDDO, CaptMorgan and 7 others 10 Quote
Littlebob Posted June 2, 2014 #290 Posted June 2, 2014 What's not to like an amazing ship, well done. Quote
md1400cs Posted June 2, 2014 #291 Posted June 2, 2014 Absolutely gorgeous. Well done. (:-) MIchale Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa -
MEDDO Posted June 2, 2014 #292 Posted June 2, 2014 Very very very nice! Quote Michael Shipwrights of Ohio Current Build: ... Completed Builds: Queen Anne Barge - Syren, Pinnace - MS, Halifax 1768 - LSS, Murrelet - Pygmy, Swift 1805 - AL
JLuebbert Posted June 2, 2014 #295 Posted June 2, 2014 Beautiful! Great job. Quote Builds in progress: Mamoli Gretel Constructo Enterprise Future builds: Amati Santa Maria (and 15 others that caught my eye....)
russ Posted June 2, 2014 #296 Posted June 2, 2014 Congratulations on a great looking model. It is a work of art. Thanks for sharing the build. Russ Quote T'aint a hobby if you hurry Completed projects Cross section model by Russ 1/48 scale Biloxi schooner model restoration 1/24 scale Biloxi oyster skiff 1/24 scale Biloxi schooner 1/48 scale POB Current project Biloxi lugger Captain Roy 1/48 scale POB
patrickmil Posted June 3, 2014 #297 Posted June 3, 2014 AJ, Your Niagara looks fantastic. You did an outstanding job on her. Quote Thanks, Patrick YouTube Channel for fun: Patrick's Scale Studio Finished: Model Shipways US Brig Niagara I Love Kit USS Curtis Wilbur DDG-54 Current: Trumpeter USS Yorktown CV-5
CaptMorgan Posted June 3, 2014 #298 Posted June 3, 2014 I could look at these photos for hours and still find sweet new details. Fantastic build and many thanks for the build log. I continue to learn a lot from you... Thank you..... RR Quote Till next time..... 😎 Steve Finished: Artesania Latina Constellation; Model Shipways USF Confederacy: Medway Longboat 1742 - Syren Ship Model Company Current Build: Syren's Winchelsea
petervisser Posted June 4, 2014 #299 Posted June 4, 2014 Congratulations on your fantatic model. Very fine work and the pictures do it justice. Time to splice the ole mainbrace, I'll wager! Peter Quote Build Log: Billing - Cutty Sark In The Gallery: HMS Unicorn, HMAV Bounty, L'Etoile, Marie Jeanne, Lilla Dan, Zeeschouw "Irene" A Toast: To a wind that blows, A ship that goes, And the lass that loved a sailor!
Don Quixote Posted June 26, 2014 #300 Posted June 26, 2014 Oh, Pee-Shaw. Mine's going to look at LEAST 1,000,000,000 times... worse... BEAUTIFUL!!!!! Thanks for the lessons Quote Norwegian Sailing Pram 1:12 Scale. 2nd boat in the learning series. In Dry Dock: Muscongus Bay Lobster Smack. 1:24 scale. Model Shipways, 3rd in the learning series. Not sure what'll be next, probably the Santa Maria by Artesania Latina 1:65 scale. Unless someone has a better suggestion for a beginner. Pride of Baltimore. Model Shipways. Clipper used in the war of 1812. Black Falcon. Mantua Model. 18 century corsair brig. CSS. Alabama. E. Manolie? Can't read the font. Build in Liverpool in 1862 for use in the American Civil War by the Confederates. Steam and sail, sloop of war. Of all the things I've lost, I miss my mind the most. A baseball cap my Dad wore.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.