Glenn-UK Posted June 29, 2015 #271 Posted June 29, 2015 It's just a strip a walnut, it is detailed in the instruction manual see the last para above figure 025 on page 42. 5mm length 0.5mm x 3mm Rich.F 1 Glenn (UK)
Shipyard sid Posted June 29, 2015 #272 Posted June 29, 2015 Hello Rich Well done, things are going well. The part for the gunport lids are 491 lower gun deck gunport scuttle hinges. When you come to fit your gunport lids check out their configuration before you add the hinges. The lids are wider than deep. You will see what I mean if you measure them on page42. DAVID Rich.F and canoe21 2
Rich.F Posted June 29, 2015 Author #273 Posted June 29, 2015 Thanks Very Much Guys, I offered one up last night David, I do see what you mean. Rich. Builds in Progress: HMS Victory Completed Builds: Constucto Enterprise Future Builds 2021/2022 USS Constitution
Rich.F Posted June 29, 2015 Author #274 Posted June 29, 2015 hey Guys The fitting on the end of the 0.5mm x 3mm ? Rich. Builds in Progress: HMS Victory Completed Builds: Constucto Enterprise Future Builds 2021/2022 USS Constitution
Shipyard sid Posted June 29, 2015 #275 Posted June 29, 2015 Yep fitting on end of strip as per fig 026
Rich.F Posted October 3, 2015 Author #277 Posted October 3, 2015 HI All, I have been slowly working on the ship, Shes coming along nice and er, slow. A few minor changes made, (not reading plans properly) Took a break from building as i was getting home from work and not enjoying the build as it was becoming more of a chore than fun, Plus its been a nice summer ( well as good as England gets .. and now the Rugby is on well !! ) ... The main problem I had was the gun port patterns (forecastle) 276, I made the error of not breaking out the bulkhead pattens 1-5 1-13,, and of course I have added the second planking etc, lets not forget the paint!!. I wasnt unill I placed the hand rails and the Snatch block (61) I realized my mistake ..........two weeks later........ The Upper deck is now finished and bulk walls in place, Im just cleaning up the build now touching up the paint etc, and going to work on... ( not sure).. must read the manual.. If any body want a copy of the manual i have them in a Word 2007 format. (to big to upload here PM me with you email if you like) Well thats it for now TC all. Seventynet, canoe21, Sjors and 1 other 4 Rich. Builds in Progress: HMS Victory Completed Builds: Constucto Enterprise Future Builds 2021/2022 USS Constitution
src Posted October 3, 2015 #278 Posted October 3, 2015 She is looking great Rich. Arent do-overs fun?? At least you caught it and were able to fix it. I'll trade you some 100+ degree California days for some of the English summer if you want. Sam Rich.F 1 Current Build Constructo Enterprise
Rich.F Posted October 25, 2015 Author #279 Posted October 25, 2015 Hi all, Been working hard over the last few weeks on the build (Pictures to follow) .. I had a few research nights and a few things that i did not understand some of what " The beakhead Capping Assembly" think I have it now. Came across these Just thought I would share: JLuebbert, canoe21, src and 1 other 4 Rich. Builds in Progress: HMS Victory Completed Builds: Constucto Enterprise Future Builds 2021/2022 USS Constitution
Rich.F Posted October 26, 2015 Author #280 Posted October 26, 2015 Hello All, Thanks for the comments and Likes, as always very much appreciated. A few updated pictures dgbot, mort stoll, src and 3 others 6 Rich. Builds in Progress: HMS Victory Completed Builds: Constucto Enterprise Future Builds 2021/2022 USS Constitution
src Posted October 26, 2015 #281 Posted October 26, 2015 Wow, Rich, She is coming together. Sam mort stoll 1 Current Build Constructo Enterprise
Rich.F Posted October 28, 2015 Author #282 Posted October 28, 2015 (edited) HI All, Im after a bit of help. Can any one tell me what parts go in the red circle area. totally lost where i am. Edited October 28, 2015 by Rich.f canoe21 1 Rich. Builds in Progress: HMS Victory Completed Builds: Constucto Enterprise Future Builds 2021/2022 USS Constitution
fnick Posted October 28, 2015 #283 Posted October 28, 2015 Hey Rich that is really good work! Dont the catheads go in those red areas? (Better wait for an answer from someone more knowledgeable than me!! ) Nick Le Mirage by fnick - Corel - 1:75
Shipyard sid Posted October 28, 2015 #284 Posted October 28, 2015 (edited) Hello rich The area you point out I guess is infront of the snatch block. Part number 125 ( main rail timber head) fits in front of the snatch block, and the plank sheer part number 380 fits between the timber heads as does the fife rail. See page 28 -29 the beakhead capping assembly, photo 25&26. The fife rail assy part 405 tucks up to inside face of the timber head The timber heads need to be shaped. DAVID Edited October 28, 2015 by Shipyard sid Rich.F and canoe21 2
Rich.F Posted October 29, 2015 Author #285 Posted October 29, 2015 (edited) Hello All, Thanks for the comments and Likes, as always very much appreciated. David Thanks again for you advice. soon as i have finished this coffee im going to head to the dry dock 10, and crack that whip out. Nick, being dyslexic, I at times find it hard to follow the Text instructions at times, I highlight some bits. etc But im ok if there is some pictures/drawing to back up, What i have trying to do, is mach on the plans what the part numbers are, then ( take look at other build logs) just to make sure its right, .. But also doing it my way to the best i can!.. I m going to work on this then, there is a holiday for a few weeks while I have 5 day course to do , and not looking forward to it ! Edited October 29, 2015 by Rich.f src and canoe21 2 Rich. Builds in Progress: HMS Victory Completed Builds: Constucto Enterprise Future Builds 2021/2022 USS Constitution
src Posted October 29, 2015 #286 Posted October 29, 2015 Enjoy your Hollidar Rich. Sam Rich.F 1 Current Build Constructo Enterprise
pompey2 Posted October 29, 2015 #287 Posted October 29, 2015 Hi Rich Your Vic is coming on great guns. The question you asked - yes it is the Catheads that go on there. Here's photo's of the assembled bits (great fun that little assy) and in position. Keep up the good work Nick foxy, dgbot, Rich.F and 2 others 5 Current build USF Confederacy Previous log - HMS Victory
peterwwebster Posted October 31, 2015 #288 Posted October 31, 2015 Hi Rich. I have suspended my build for the last few months as my wife is ill but just wanted to say I think your build look great Peter Caldercraft Victory
dgbot Posted October 31, 2015 #289 Posted October 31, 2015 Your Vic is really shaping into a fine build I enjoyed your log. David B Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/
Rich.F Posted October 31, 2015 Author #290 Posted October 31, 2015 Hello All, Thanks for the comments and Likes, as always very much appreciated. Peter, Thanks very much, I hope your wife feels better soon, pass on my regards. David B, Thanks very much. and to every one else, thanks very much. Rich. Builds in Progress: HMS Victory Completed Builds: Constucto Enterprise Future Builds 2021/2022 USS Constitution
Rich.F Posted November 5, 2015 Author #291 Posted November 5, 2015 Greeting everyone. Something I have been thinking of for a long while. I have had a personal chat with a Very Nice person (Ensign) I have brought this netting, A few pictures attached, Do you think this is a good size in relation. bear in mind it will be a diamond shape. Cheers Rich. Builds in Progress: HMS Victory Completed Builds: Constucto Enterprise Future Builds 2021/2022 USS Constitution
Sjors Posted November 6, 2015 #292 Posted November 6, 2015 Rich, I know an answer but I cannot translate it !!!!!!! I will give it a go..... Bow section is one squire to high. Middle picture with railing is to small. Right picture........good one. What i will try to do is I will put the netting around the bracket things. On the bottom I will lay down a plank ( painted black ) then at the top I will stitch it on the wire that goes true the eyes.... is this making sense ??????????? And yes, it should be diamond shape Sjors Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre
Shipyard sid Posted November 6, 2015 #293 Posted November 6, 2015 Greetings RIch This is what i was advised to use, which you may have seen mentioned on other logs. It's called tulle and is used for the likes of wedding veils. You might find it at. FABRIC LAND It costs about £1 a sq metre. DAVID mort stoll and canoe21 2
shihawk Posted November 6, 2015 #294 Posted November 6, 2015 Hi Rich Here,s a couple of pics showing the tulle David mentioned , it will give you an idea of how it looks GuntherMT 1 HMS Victory by Shihawk. Billing 1-75 wood finish
foxy Posted November 6, 2015 #295 Posted November 6, 2015 Hi Rich. 1/72 is a larger ship, looking at your first picture I would say that was a good representation for size. Diamond as you say. Stitched to a wood or brass runner across the top should look nice and neat. Frank.
pompey2 Posted November 6, 2015 #296 Posted November 6, 2015 Hi Rich For my Vic netting I followed this calculation I estimated the 'pitch' on the real hammock netting to be approx. 8" square. At a scale of 72:1 that comes out at about 3mm pitch I guess the rope is about 1/2" - 3/4" Again to scale that is about 0.2mm hope that's helpful Nick Current build USF Confederacy Previous log - HMS Victory
pompey2 Posted November 6, 2015 #297 Posted November 6, 2015 Another point of course is that the colour is natural. Current build USF Confederacy Previous log - HMS Victory
Ensign Posted November 6, 2015 #298 Posted November 6, 2015 Hi Rich, The problem with Tuille, as I think you know, is that it is not a diamond shape. It is very flexible which is good but If the material you bought is not flexible enough you will have trouble with the Hammock cranes as it must form a U shape in order to cover both sides of the Hammock cranes. If what you have is not satisfactory and you can't find any Mosquito netting PM me with your address and I shall send you some. Gary Shipyard sid and dgbot 2
Rich.F Posted November 29, 2015 Author #299 Posted November 29, 2015 Hello All, Thanks for the comments and Likes, as always very much appreciated. just a small update, Not much to show for a few weeks worth of work but, I like how this came out. The hand rails in the picture was the fourth attempt, did not like how they was coming out. I did start building the remaining Cannons today, as all was out for the day at home. (chores done first).. Cheers robert22564, maggsl_01, canoe21 and 4 others 7 Rich. Builds in Progress: HMS Victory Completed Builds: Constucto Enterprise Future Builds 2021/2022 USS Constitution
foxy Posted November 29, 2015 #300 Posted November 29, 2015 That's very good Rich. Working in wood is a challenge and no mistake. Frank.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now