NMBROOK Posted November 5, 2015 #91 Posted November 5, 2015 The scale of Santisima Trinidad is 1/72. The box on the top is originally reinforcement of the hull during building but Nigel Brook notify me on this forum that it would be also great for putting it upside down as you wrote so in production version I will make it little higher for this purpose Daniel A 40mm block under the front of the jig on the Nuestra when upside down on a flat surface makes the keel horizontal The hull is perfectly true to the surface then,making marking everything out like wales etc easy Kind Regards Nigel Ulises Victoria, Dimitris71 and Daniel Dusek 3 Currently working on Royal Caroline
Daniel Dusek Posted November 5, 2015 Author #92 Posted November 5, 2015 Yes, I will try to keep the updating of progress on both of the projects . Daniel Dimitris71, Dubz and NMBROOK 3
Daniel Dusek Posted November 18, 2015 Author #93 Posted November 18, 2015 (edited) Hello all, Christmas Sale is here. Get 30% off on all goods in stock. Use this discount code in shopping basket: CHRISTMAS SALE 2015 The discount code is valid only to the end of Sunday 6th December. Best regards Daniel Dusek Edited November 18, 2015 by Daniel Dusek Dubz, Canute, GuntherMT and 4 others 7
Daniel Dusek Posted November 24, 2015 Author #94 Posted November 24, 2015 (edited) Hello, Kevin Omland from Oyster Bay, NY USA sent us photo of building stave church Gol in 1/87 scale with some notes from building. Although its not ship model i think it is very nice work, if you are interested you can see it here: http://dusekshipkits.com/stave-church-gol1 Best regards Daniel Dusek Edited November 24, 2015 by Daniel Dusek Jason, AntonyUK, avsjerome2003 and 6 others 9
Daniel Dusek Posted November 30, 2015 Author #95 Posted November 30, 2015 Hello all, Just only last week of Christmas sale. Get 30% off on all goods in stock. Discount code: CHRISTMAS SALE 2015 The discount code is valid only to the end of Sunday 6th December. Best regards Daniel Dusek NMBROOK, Dimitris71, mtdoramike and 4 others 7
Ponto Posted November 30, 2015 #96 Posted November 30, 2015 Ahhh, the joys of Christmas.....did I understand correctly that the Canadian Dollar is being accepted at par with the Euro??? ... hope your sale goes well Daniel ........ JP zoly99sask, mtdoramike, Canute and 2 others 5 Built & De-Commissioned: HMS Endeavour (Corel), HMS Unicorn (Corel), Abandoned: HMS Bounty (AL) Completed : Wappen Von Hamburg (Corel), Le Renommee (Euromodel)... on hold Current WIP: Berlin by Corel On Shelf: HMS Bounty (Billings),
mtdoramike Posted November 30, 2015 #97 Posted November 30, 2015 I wish you were located in the US, I wish you luck with your sale. mike mtaylor and Daniel Dusek 2
Daniel Dusek Posted December 1, 2015 Author #98 Posted December 1, 2015 Thanks guys, Yes J.P. with this sale the CAD is on the same price like EUR before sale Best regards Daniel mtaylor 1
shihawk Posted December 1, 2015 #99 Posted December 1, 2015 I couldn,t resist Daniel,s sale so ordered the Santa Maria and a couple of longboats for my Vic , they arrived inside a week . With the present exchange rate and the 30% sale this is a real bargain for anyone from the UK . Thanks Daniel . mtaylor, NMBROOK, Daniel Dusek and 1 other 4 HMS Victory by Shihawk. Billing 1-75 wood finish
Daniel Dusek Posted December 1, 2015 Author #100 Posted December 1, 2015 Thanks shihawk, I hope you will enjoy with the kits. Daniel shihawk, NMBROOK and mtaylor 3
Daniel Dusek Posted December 5, 2015 Author #101 Posted December 5, 2015 Hello, There are only two days of Chrismas sale. Last chance to save 30% on all goods in stock. Discount code: CHRISTMAS SALE 2015 The discount code is valid only to the end of Sunday 6th December. Best regards Daniel Dusek
Daniel Dusek Posted December 13, 2015 Author #102 Posted December 13, 2015 (edited) Hello, I made some progress on Santisima Trinidad. Last week I finish second layer of planking on 3D model. In this kit all planks (both first and second layers) will be cut by laser for as easy as possible assembly. I hope I will be able to post some photos of prototype before the end of year. Best regards Daniel Edited December 13, 2015 by Daniel Dusek avsjerome2003, Sjors, shihawk and 8 others 11
Daniel Dusek Posted December 13, 2015 Author #103 Posted December 13, 2015 Thanks Dirk Dubz, Canute and mtaylor 3
mtaylor Posted December 13, 2015 #104 Posted December 13, 2015 Interesting concept on laser cutting the planks. That has to be a lot of planks. Canute, Dubz, Sjors and 1 other 4 Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
RichardG Posted December 13, 2015 #105 Posted December 13, 2015 It will be interesting to see how well laser cut planking works. The char on the edge would work well as caulking for deck planking. I suppose for the hull you'll be using a dark wood so that won't be an issue (I'd hate to have to sand it all off). All the best. Richard. Canute, mtaylor and Daniel Dusek 3 Richard Current Build: Early 19th Century US Revenue Cutter (Artesania Latina "Dallas" - messed about) Completed Build: Yakatabune - Japanese - Woody Joe mini Member: Nautical Research Guild & Midwest Model Shipwrights
shihawk Posted December 13, 2015 #106 Posted December 13, 2015 Hi Daniel . Your idea of the precut planks at first seemed a great solution but in my mind could present a few problems . Firstly unless the hull is built exactly right , square ,in line , level , surely any small variations could potentionaly cause problems with the fitting of preshaped planks . Even the variations from fairing or cutting a bearding line can change the run of planks slightly and surely once one is off they all are ?. Secondly many including myself enjoy the actual process of shaping planking to there own design and may feel restricted in having to follow such strict rules . I know and understand many would welcome the simplification of this process but to me it feels a bit restrictive, Forgive me for voicing my opinion as you know more about shipbuilding than i ever will ,but i felt it was a point worth raising and would be interested to know now other members feel . I suppose it,s a case of it will work for some and not for others . Again i do not mean this as a critisism of what is a great idea and am simply expressing my humble opinion, perhaps you have already allowed for such variations and found a way to avoid them ,or simply offer the kit with or without the laser cut option . Respectfully Boyd Daniel Dusek, mtaylor, Canute and 1 other 4 HMS Victory by Shihawk. Billing 1-75 wood finish
Daniel Dusek Posted December 13, 2015 Author #107 Posted December 13, 2015 (edited) Hello Guys, Thanks for your comments. Richard, the planks on the deck will be engraved, and it look similar like the caulking as you wrote, you can see it for example on my model of Nuestra Senora (picture below). Actually also the planks of the hull was caulked similar like decks, it is visible for example on Batavia ship: https://gretavanderrol.files.wordpress.com/2010/08/bowsprit-crop.jpg https://upload.wikimedia.org/wikipedia/commons/8/8d/20110417_Lelystad%3B_Batavia_Haven_12_ship_at_Batavia_Harbour.JPG I use pear wood for the second planking as it is the best possible material for that, it is not dark but very easy for staining (The model of Dutch yacht in this thread is also planked by pear wood and then stained into darker tone). So for this reason I do not think it is need to sand all the char. And I prefer to make the model colored so in that case there is absolutely no problem with the char. Boyd, you are right that any variation of shape could lead to problem with exact fitting of planks but I think these problems could be only on the hull under the waterline due to quite simple shape above the waterline but the hull under waterline should be copper sheathing, so there is no problem to use putty. Anyway, there will be no problem to offer standard wooden strips instead of second laser planking . Best regards Daniel Edited December 13, 2015 by Daniel Dusek mtaylor, Canute, GuntherMT and 4 others 7
NMBROOK Posted December 13, 2015 #108 Posted December 13, 2015 Dunno how I missed this Daniel The 3d render of the model looks superb Top marks for going with Pear for the planking I do hear where Boyd is coming from though.Whilst your bulkhead system guarantees an accurate framework,there are the variables of fairing and sanding of the first ply layer.Don't get me wrong,I REALLY like the idea of the prespilled Pear planks,I hope it works out. One thing,if I may suggest.What I found when skinning the upper half of Nuestra Senora is that some marks on the bulkheads for where the joins of the ply patterns fall would make things more foolproof.If possible,could these be laser etched on the bulkheads during the cutting process? Kind Regards Nigel mtaylor, Daniel Dusek, shihawk and 1 other 4 Currently working on Royal Caroline
shihawk Posted December 13, 2015 #109 Posted December 13, 2015 Problem solved ,just me overthinking things again . Satisfied Boyd Canute and Daniel Dusek 2 HMS Victory by Shihawk. Billing 1-75 wood finish
Daniel Dusek Posted December 13, 2015 Author #110 Posted December 13, 2015 (edited) Thanks Nigel, Acually I use exactly what you recommend-the marks on the frames for exact positions of the more important plans (planks with gun ports). The planking will be done in three steps: 1) red planks (around gun ports) 2) blue planks -these planks could be adjust or fill if it is need, because they will be not visible (planks under wales) 3) wales-black planks, the wales overlap the blue planks as it is shown in the picture This system should guarantee exact planking above the waterline. Daniel Edited December 13, 2015 by Daniel Dusek mtaylor, Beef Wellington, NMBROOK and 6 others 9
Ed Saur Posted December 13, 2015 #111 Posted December 13, 2015 Mr. Dusek, I think the Dutch Statenyacht pictures are great. Now that you have triremes, 3-deckers and 3d printers under control -- time for the Peregrine Galley? It has oars, sails and gingerbread galore! And please make it large. Ed Saur Canute and Daniel Dusek 2
NMBROOK Posted December 13, 2015 #112 Posted December 13, 2015 Excellent Daniel I assume you plan on including the copper tiles.The more and more I see of your design,the more excited I become.A bit like a kid in a sweet shop,but I am 43 years of age . This is going to be an awesome kit!! Kind Regard Nigel mtaylor, Daniel Dusek, Ulises Victoria and 1 other 4 Currently working on Royal Caroline
Ulises Victoria Posted December 13, 2015 #113 Posted December 13, 2015 Dang! I will have to throw away my present stash of kits and concentrate the rest of my life to build David's Santísima and Chris' Victory. Any of these guys has plans for a Sovereign of the Seas and a Soleil Royale? (My other dream ships, by the way) Canute, mtaylor, Sjors and 1 other 4 There aren't but two options: do it FAST, or do it RIGHT. Current Project Build Log: Soleil Royal in 1/72. Kit by Artesania Latina. Last finished projects: Royal Ship Vasa 1628; French Vessel Royal Louis 1780. 1/90 Scale by Mamoli. 120 Cannons Future projects already in my stash: Panart: San Felipe 1/75; OcCre: Santísima Trinidad 1/90; Wish List: 1/64 Amati Victory, HMS Enterprise in 1/48 by CAF models. So much to build, so little time!
Daniel Dusek Posted December 14, 2015 Author #114 Posted December 14, 2015 Thanks Guys, Nigel-Yes, I plan to make also copper tiles. Ed Saur, Ulises Victoria-At this moment it is hard to write what models will be next, it also depend on quality of sources (mainly quality of plans), but I would like to do De Zeven provinzien after the Santisima as I wrote earlier. But parallel to this big kits I everytime work also on some smaller projects (as Dutch statenyacht for example). Daniel Canute, Dubz, NMBROOK and 1 other 4
Ed Saur Posted December 14, 2015 #115 Posted December 14, 2015 Hmmm... I guess any Stuart 6th Rate done large would be super. Over the years, Model Shipwright has been flogging us mercilessly with many terrific, but difficult to build, gilded beauties -- produced by master model makers. And I imagine, but do not know, that they had good plans from English sources. HMY Fubbs is also in the back of my mind now, but I have seen so many versions of it modeled, that I wonder if it isn't the perfect example of the problem you have with plans. In any event, I am looking forward to the Staten Yacht and the flogging to end -- my chance to build a really great 17th century model! Daniel Dusek, NMBROOK, Canute and 1 other 4
Etcher Posted December 14, 2015 #116 Posted December 14, 2015 Hi Daniel! Just found this thread having ordered the Maria HF31 from you today. Looking forward to building it. Looks a great kit! Dubz, mtaylor and Daniel Dusek 3 Darren Current Builds: Berlin Tram by OcCre Lady Eleanor by Vanguard
Ulises Victoria Posted December 14, 2015 #117 Posted December 14, 2015 Apologies Daniel. Changed your name to David in my last post. Both names are exactly the same in Spanish. Daniel Dusek and mtaylor 2 There aren't but two options: do it FAST, or do it RIGHT. Current Project Build Log: Soleil Royal in 1/72. Kit by Artesania Latina. Last finished projects: Royal Ship Vasa 1628; French Vessel Royal Louis 1780. 1/90 Scale by Mamoli. 120 Cannons Future projects already in my stash: Panart: San Felipe 1/75; OcCre: Santísima Trinidad 1/90; Wish List: 1/64 Amati Victory, HMS Enterprise in 1/48 by CAF models. So much to build, so little time!
Daniel Dusek Posted December 14, 2015 Author #118 Posted December 14, 2015 Thanks Etcher, I will send you the kit just tommorow, I hope you will enjoy with the kit. For inspiration i recommend to look on Dirk (Dubz) building log No problem Ulises Victoria, I did not know that it is the same in Spanish, at least I am little more wise now Daniel mtaylor and Canute 2
mtdoramike Posted December 14, 2015 #119 Posted December 14, 2015 Ooooooh boy, the Trinidad is one of my favorite ship models. I can't wait to see this beauty. mike Ulises Victoria, Daniel Dusek and mtaylor 3
Daniel Dusek Posted December 15, 2015 Author #120 Posted December 15, 2015 (edited) Thanks Mike Don, I also work on the Statenyacht, below is the 3D model of figurehead but I have some problems with 3D printer and I am waiting for its repair now. When it will be repaired I will post photos of printed figurehead Daniel Edited December 15, 2015 by Daniel Dusek Archi, GuntherMT, Canute and 4 others 7
Recommended Posts