ccoyle

Oh, I wish! 😆

I did the second coat of interior primer last night and rolled on the third during lunchtime today (working from home for a couple of days). It is evident to me that a certain amount of unevenness will remain on the finished product, but I think that choosing a light interior color was a good decision. At least with the primer, the warts are not extremely obvious at normal viewing distances. I will begin applying the interior top color tomorrow. Today's photo shows the second coat of interior primer prior to today's work.

Wow. That barely qualifies as a "kit." It will be interesting to see if you can work some magic with this. Cheers!

Stein, that is a fantastic model! Please, please, please create an entry for her in the gallery!

The idea is that the primer fills in low spots; sanding knocks off the high spots, thus (hopefully) creating a more level surface, i.e. smoother. I still have a few dimples in the seams that I'm not completely happy with. These are spots where the epoxy oozed through to the inside, creating tiny puckers on the outside. They're still water-tight, and they won't be immediately apparent when the boat is upright, but they still bug me. I only have a small amount of the gray primer left, but I'm thinking I'd like to do a fourth coat. I have some foam rollers, so I may give the 4th coat a go with one of them -- it should produce greater coverage. I have been sanding with 120 grit between coats until now, but I will go down to 220 between these last coats. But before that I plan on flipping the boat over and working on the inside. Now that I've seen just how much "filling" the primer will do, I know there's no hope of getting a perfectly smooth finish on the interior (cuz of my amateurish epoxy and fiberglass work), so I won't fret too much about it and will just focus on gittin' her done. P.S. I casually mentioned to The Admiral the other day that now that I had the basic boat-building skills down pat, I needed to add another boat to my fleet, one that could take a small outboard motor. She gave me a long-winded reply that translates as "no." I wasn't too perturbed, because I know we don't have the room for a second boat anyway. 😉

Welcome, nehemiah. Those are all good kits you mentioned. Polotsk will have the simplest rig of the three, being a topsail schooner rather than brig-rigged. Granado and Flirt are both Chris Watton designs, and Flirt is much newer, so that kit will include all of Chris's latest design innovations. But you can't overlook personal preference, i.e. which ship do you best like the looks of? Liking your kit selection goes a long way toward build motivation. Cheers!

Third coat of primer. My paddle and car-top soft racks arrived today. I had quite the time settling on a paddle, but ultimately narrowed the decision to an angler's paddle from either Bending Branches or Best Marine. They were essentially the same paddle -- same design, same length, both two part paddles, both companies have great customer service. I finally opted for the Best Marine paddle, because it has a carbon fiber shaft rather than an aluminum shaft, so it is about 4 oz lighter. Most carbon fiber paddles cost at least $50 more, so I was a bit worried about that, but the company's reviews everywhere were good, so I took the gamble. BTW, did you know that high-end paddles can sell for over $500? Yikes! Now to wait for paint to dry -- again.

The easiest and most beneficial way to dispose of a large number of tools and supplies is to donate them to a local modeling club. The club can then auction the items off to raise funds, and your father's supplies will end up in the hands of people who can appreciate and use them. To find your nearest club, check here.

I love the Corsair, and Baa Baa Blacksheep was one of my favorite shows as a kid (even wrote a letter of protest to NBC when they announced its cancellation -- received a glossy, Robert Conrad-autographed B&W print of the cast as a thank-you gift). The few available card models of the F4U aren't particularly detailed. I'm waiting for Halinski to publish one, then I will be all over it.

Thanks, Gary. I have actually been pondering most of the points you bring up. I have purchased a set of soft, roof-top pads, designed for cars without roof racks. The pads fasten through the passenger compartment and have the built-in straps that go over the canoe. Because of the canoe's length, it will need tie-downs at both bow and stern (also provided in the kit). Being a pack canoe, i.e. the paddler sits on the floor, the only thwart is the one to which the seat back attaches. I have seen many pictures of antique canoes that have hardware attached ("canoe jewelry"), and I am also well aware of the limited options for attachment -- I do not wish to ding my car top or elbows or knees on any poorly-placed hardware that sticks out where it shouldn't. But I have time to meditate on all this. Oh, and I have seen it recommended that soft carriers not be used at speeds above 55 mph (88 kph), which I don't see as an issue for the foreseeable future -- plenty of water to check out locally without needing to hop on the interstate. Thanks for checking in!

I'm trying to keep in mind the old adage about the perfect being the enemy of the good. Mostly I just want a functional craft that will not result in my untimely death.😝 But, I do want it to look half-way decent, and I tell myself that a smoother hull will reduce drag and likely give me another 0.001 m/s of speed. 😋 Still, I don't really want to fork out more $$$ for primer, so it will be three coats max, if I can make it last that long.

Personally, I have a thing for pre-Dreadnoughts, so Condorcet gets my vote.

Remember that lovely first coat of primer? Hope y'all weren't too attached to it. You can get attached to the final coat of finish color -- whenever that happens.

Too late! 😭

Whilst browsing around today, I came across a YouTuber who just happens to be at the same point of constructing a Sassafras 12 as I am. He's documenting his build in a series of videos. I found his video on priming very helpful. I'm reluctant to watch any of the earlier videos, for fear I might discover some fault in my methods that I probably don't want to know about at this point. 😬

Short-nap roller.

First coat of exterior primer. This coat of primer revealed quite a few wire holes that didn't fill in well with epoxy. One even appeared to have leaked white primer from the interior to the exterior -- which obviously is not good! I'll have to fill these in properly before the next coat.

Top-shelf work, Glenn!

Fat chance! I've been thinking ahead to mooring options. When I finally get around to car-topping this thing, I will need anchoring points at both the bow and stern. Perhaps horn cleats ... ... or maybe pad eyes. These would also serve as points for attaching a painter or anchor line. Also thinking about where to attach them. Decisions, decisions.

I'm on it -- first coat of interior primer on. If I had better light, I could've flipped it over and done coat #1 on the exterior, too, but I can't see well enough in the fading evening light to do a good taping job.

"Well, I sympathize completely."

Oooooh ... look what the UPS guy brought! Notice that the can on the far left is dented, as is one of the other cans where you can't see it. The cans are surprisingly flimsy, and they were shipped swaddled only in bubble wrap -- no Styrofoam board, no rigid cardboard. Pretty iffy packing for a fairly heavy and apparently easy to damage product. Just happy the United Parcel Smashers didn't destroy this shipment, too. Will probably try to get started with the primer tomorrow.

Wood kits for ships of that era are rather few in number. Model Shipways has one of Flying Fish, and a couple of the European companies offer either Cutty Sark or Flying Cloud. MarisStella has a nice kit of the barque Stefano. There are also a few kits of some of the 20th-century sail training ships as well. But that's about it.

Last plastic ship I worked on (not finished, mind you) was a 1/700 scale IJN Ise. That was 39 years ago. 😲

Bingo! If one were a scale foot shorter than the other, I would have had much more to say about the two kits -- and not nice things, if you get my point. 😉 P.S. Last night I finished the horizontal and vertical stabilizer components for White Tail same as for Spanish Nationalist, so now the two planes are at the same point in their build sequences.