-
Posts
2,932 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by rafine
-
Thanks so much Denis, B.E. and Sjors for the kind words. Thanks also to the "likes". Bob
-
With the exception of the swivel guns and the anchors, work on the hull is now complete. Those items will be done during or after the masting and rigging process to avoid damage. At the aft end, I added the cabin port lids and the standing figures at the transom edge. At the bow, I did the foremost port covers and added the chesstrees and simulated sheaves for the fore tack. The transom figures are the kit castings, but with their heavy bases cut off and the figures modified to fit the transom in a manner more closely reproducing the appearance shown in AOTS. The metal was painted to match wood in the same manner as previously done on the other castings. All of the port lids and covers were made from boxwood strip and used the kit's PE brass hinges.The aft lids also had brass rings added. AOTS shows no rings on the forward covers. The chesstrees are boxwood strip with simulated sheaves drilled and cut in. The fore tack sheaves were drilled and cut into the hull ahead of the chesstrees. I am now beginning work on the masting and rigging. Bob
-
Nils, it's great to see the new photos including the overall views to see just how extraordinary the work is. Bob
- 2,625 replies
-
- kaiser wilhelm der grosse
- passenger steamer
-
(and 1 more)
Tagged with:
-
Great job on the belfry and rail Martin. They look just right. Bob
- 467 replies
-
- fly
- victory models
-
(and 1 more)
Tagged with:
-
HMS Naiad 1797 by albert - FINISHED - 1/48
rafine replied to albert's topic in - Build logs for subjects built 1751 - 1800
Albert, once again your work is exceptional. Bob -
Rusty, I really envy you that new work space. It looks great and I can't wait to see the beautiful work that you'll turn out there. Bob
- 310 replies
-
- cheerful
- Syren Ship Model Company
-
(and 1 more)
Tagged with:
-
Thanks so much Nils, Martin, Denis and Elijah for the generous comments and thanks also to the "likes". Bob
-
Moving to the outer hull, I decided to do the lower deadeyes and chainplates next. The deadeyes are the kit parts, but a decision had to be made about the main chainplates. The kit parts are PE brass, but they looked odd to me when compared to the those shown in AOTS. The PE part is one piece and has a loop below the deadeye that is supposed to represent the shackle to which the lower part of the chainplate is attached. To me, it seemed much too large and lacks any hint of an attachment to a separate lower part. I chose to make the chainplates in two parts, using wire for the part around the deadeye and the shackle, and brass strip for the lower portion. The brass strip was bent over the wire to create a simulation of the shackle attachment. The first photo below shows a comparison of the kit part to what I produced. The deadeyes for the main topgallant backstay and the mizzen deadeyes don't have the visible shackle attachment and I used the PE parts for them, as they seemed to match the appearance shown in AOTS. The angles for the chainplates were set by using a piece of line attached to dummy masts. Bob
-
A beautiful looking ship Joe. I really like it. ( I may have to follow you again ). Bob
- 136 replies
-
- caldercraft
- Cruiser
-
(and 2 more)
Tagged with:
-
Thanks so much Denis, Grant, Red, Hamilton and Joe for the very generous comments. Thanks also to the "likes". Greatly appreciated, as always. Bob
-
Another "wow" moment Nils. Spectacular. Bob
- 2,625 replies
-
- kaiser wilhelm der grosse
- passenger steamer
-
(and 1 more)
Tagged with:
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.