Jump to content

Trussben

NRG Member
 View Profile  See their activity

  • Posts

    1,837

  • Joined

  • Last visited

 Content Type 

Everything posted by Trussben

  1. Trussben
    Making some belaying pins on my lathe out of boxwood.
  2. Trussben
    Sweet!
  3. Trussben
    Thanks for all the likes and comments. I decided to start work on the exterior planking above the wales, the wales themselves were masked off as you can see to try and protect them somewhat. Im going to try and follow my planking plan as close as the hull allows. First 3 strakes completed and beginning on the fourth, and it’s quite close to plan so far. ben
  4. Trussben
    Oh Dear!
  5. Trussben
    Rudder and tiller completed.
  6. Trussben
    I will sit in on this one too. ben
  7. Trussben
    Completed installation of all the Thwarts, knees, windlass, mast iron work, and the sheeve. Time to start work on the Rudder, some thole pins, belaying pins. ben
  8. Trussben
    Test fitting of the cockpit seats and aft most thwart underway, any tiny little gaps will be filled before painting.
  9. Trussben
    Hey Rusty, Yep - it sure is. I like working on it alongside Pegasus to keep me a little sane, and Chucks kits are always a blast and turn into great looking models if you take a little time on them - Yours just goes to show what level of excellence can be achieved. ben
  10. Trussben
    Hi Everyone, thanks for the comments and the likes. Here is the fore platform and the risers installed and “nailed”. Their positions were checked against the plans several times to make sure they were at the correct height and fore/aft position was good. Now onto the cockpit seats. ben
  11. Trussben
    Wow Rusty, yet another beauty to display. The dark side is waiting my friend! 😎
  12. Trussben
    Thanks for all the likes. Greg - no lower planking or ribands. Kenny - don’t follow me to closely as I might lead you down the wrong path 😳
  13. Trussben
    Hey Mark, yeh - multi year builds are tough - that’s why I do some of ChuckP’s “kits” in between ( they are plenty interesting on their own I will tell you ) it takes some pressure off and makes me want to work better on Pegasus - that’s the key point for me these days - follow Remchoes mantra! Ben
  14. Trussben
    Hi Pat, yeh - it’s kinda nice to see some coloring on her, I machined some boxwood today that I will use for upper planking, that creamy yellow really looks nice IMO next to that deep red/pink of the Swiss pear and the deep black of the dyed wales. as always - we shall see what next week brings - probably two steps forward and one back as usual. ben
  15. Trussben
    I decided to do a little work on the exterior, so the new Knee of the Head was made and installed, then final fairing and sanding to 220/400 was completed below the Wales and 1st coat of finish applied ( 50% danish oil / 50% mineral spirits ), the wales took some damage during sanding and will have to be re-dyed later on. Im quite happy with the color that the Swiss pear has taken on with this type of finish. Next up - remove the knight heads and fair the top timber line, then proberbly start the stern framing. ben
  16. Trussben
    Finished looking, and then installing the aft platform, now onto the fore. ben
  17. Trussben
    Looking at the notches on the aft platform.
  18. Trussben
    Hi Kenny, I’m not much of a one for giving other people advice, just take your time and try not to accept something that you know is not right. Getting the spacing and symmetry correct can be tough if you want a really good result - I can’t count how many times I remade things on the lower platforms and lower deck - but I’m now happy with my results. One thing I’m doing differently from now on is using Black fishing line instead of copper wire and LOS to simulate bolts, much easier and looks better and more consistent to me. ben
  19. Trussben
    Floors completed and “nailed”, now onto the platforms.
  20. Trussben
    Thanks Everyone Mast partners completed, I was thinking about adding hatch gratings but have decided not to to allow what can be seen of below as much as possible. now to decide on what to work on next. ben
  21. Trussben
    Thanks Everyone for the likes and comments. Mast Partner layouts glued onto some boxwood blanks to start making them.
  22. Trussben
    Lower deck framing completed, have to make both main and mizzenmast partners to finish off.
  23. Trussben
    Looks awesome - Well done.
  24. Trussben
    Quite a bit of work was completed in the last week before I start traveling for work again. Friezes added, trim piece scraped with simple profile and installed below the frieze, caprails painted, and all planking had the “copper” nails added. When I get back I will start on the floors. ben
  25. Trussben
    Nice Rusty, she’s a beaut. Are you gonna add sails or not? I’m in between on that? ben

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...