Jump to content
New Publication - Ship Modeler's Handbook - They're back in stock! Thank you for your patience. ×

petervisser

Members
 View Profile  See their activity

  • Posts

    554

  • Joined

  • Last visited

 Content Type 

Everything posted by petervisser

  1. petervisser
    Great flag locker Steve. I went the same route on my own Bounty. Funny that Billing does not include this feature in the kit. Oh well, nice save! I remember using the cannons as supplied by the kit, as I didn't know any better, and they did turn out ok, with some paint and rigging. I went with buff coloured carriages, again because I didn't know any better... Anyhoo, hope you're satisfied with the replacements. I've been following your build from the wings and reliving my own time taking on this kit. Thanks for all the photos. Peter
  2. petervisser
    Just a quick update with the steering gear box finished. I purchased a photo etch sheet produced by Mantua for the decoration sets on the bow and stern. It also included the name plates that are afixed to the sides of the box, which make for a nice addition.
  3. petervisser
    As mentioned earlier, I have decided to get as much prep work done while there is no deck or hull planking. This makes everything easier to access. So the next operation was to step the masts. This was a bit of a nail biter, because everything had to be gotten right the first time. I am happy to say that it did for the mizzen and main mast. However things went sideways with the foremast because there wasn't enough clearance under the drill bit when the model was positioned on the drill press table. Hence the collars at the base of the masts to hide the "whoops" around the base of the foremast. I managed to clamp the model on the drill press and adjust the model transversely and adjust the drill press table longitudinally to allow for the rake. I found the rakes for the masts in Longridge's book "The Cutty Sark" and used a digital protractor I purchased from Lee Valley. With everything in place and securely clamped I simply had to turn on the drill. As mentioned this worked for the main and mizzen masts. The foremast did not work so well, and I have to confess there was some foul language used. At any rate, the mast collars on the deck hid any messy hole drilling and all is well in my little world. Here are some pics of the progress...
  4. petervisser
    Here is the collection of deck furniture that wa assembled this week. I have yet to put some varathane on everything. I am waiting to finish the companionway before I do that. The pig sty and paint locker aren't that detailed. Because they are hidden under the fo'csle deck, I didn't spend alot of time detailing them. Peter
  5. petervisser
    I never would have guessed when I started this hobby that I would ever have to build chicken coops for a model I was constructing. But hey, this hobby takes us down many roads and the birds have to go somewhere I guess... The Billing kit does include these little sub-assemblies, but again they are printed on an ancient sheet of mahogany and so I had to go with Plan B in assembling them. Here's how I did it... They were actually fun to build and turned out ok. I can't wait to see them installed on the model. Peter
  6. petervisser
    The heads which attach to the sty and paint locker were then constructed. Billing supply small plugs that can then be faced with a suitable veneer. I have lots of scrap wood for that. Again, they are built slightly oversize on the outboard side for later trimage...
  7. petervisser
    Thanks guys for the encouraging comments. They have not gone unnoticed. Work resumed in the ole dockyard this past week. It was spent building more components of the deck furniture in the forecastle area of the ship. I noticed that although the old kit included the paint locker and pig sty under the fo'csle deck, the modern instructions don't include them. Oh well, I thought I would build them anyway. there were some interesting angles and I built them somewhat oversize on the outboard sides, so they could be trimmed just before the hull planking is installed. Here then are some progress pictures... I measured the angles for the various sides first which could then be transferred directly to the little table saw I have. The square stock would then be used as a suitable backing for the bulkheads faces.
  8. petervisser
    Hi Glen, and welcome to MSW. I was excited to see your post because I built this model some time ago and have not seen it since. You are very lucky to have acquired such a unique kit. Mine was built pre-MSW and pre-internet, truth be told, so I built it much as Mr. Billing intended it. It is to this day, my favourite model that I have built. The lines of the hull and sail plan are a thing of beauty. The kit and instructions are pretty straightforward so you shouldn't have any issues. As you mentioned, the original wood may have to be replaced. My kit contained obechi wood and some mahogany strips, so my kit was an '80's version that I built when it was new. I shall follow along on your build log and re-live my time building this kit. I wish you all the best and many hours of enjoyment. Cheers, Peter p.s. Thanks for posting the photos of the actual ship.
  9. petervisser
    And here are the finished products of just some of the deck furniture. The model building will now have a short hiatus while I go back to work... Happy modelling! Peter
  10. petervisser
    Work continues on the deck houses...
  11. petervisser
    The hatches were also constructed along with the deck houses. These were pretty simple to construct as can be seen by the photos. I dispensed with using the printed "hatch covers" and made my own hatch boards. I then painted the hatch boards and booby hatch top before adding some trim to simulate coamings.
  12. petervisser
    Plan B. I decided to fabricate the deck houses using plywood bulkheads, but utilise the printed deckhouse tops, as there was not issue with them. Enter the MicroMark table saw. It sure was handy cutting the panels used for the sides of the deck houses. In the past, I used a ruler and Xacto knives. Not the best... Stay tuned, more tomorrow. Peter
  13. petervisser
    Contrary to popular belief, I am still involved in model boat building. I took a long break over the summer months, and then once I got going again, held off posting until I had something to show. I have decided to alter my construction order somewhat. In the past, the decking and hull planking were the first orders of business, once the bulkheads were attached to the keel. With this build I decided to complete the deck houses and hatchways first. This is because I have access to so much and the bulwarks and hull planks are not in the way. Once these are completed and the deck furniture is prepped, I will then plank the decks and then the hull. Here then are some fruits of labour. First of all, I was to discover that the 50 year old wood is not as moist and pliable as it once was. I am trying to use as much of the original kit as possible, only because this is what Mr. Billing provided. However, I soon learned that this might not be possible as the photos show. The wood was only too eager to split and crack. These are the original sheets provided with the outlines of the deck house components inked on. Because there was so much flex involved along the grain of the wood, I suspected that the sheet might split. Therefore a couple of battens were glued to the edges of the sheet to prevent it from doing so. A waste of time and glue as it turned out... I then attempted to cut out the panels and include the 3D aspect of the wood panelling. It didn't take long to realize that the exercise was hopeless. But hey, I had to try.
  14. petervisser
    Hi Steve, Great work on your Bounty! Lots of progress made and the results are very nice indeed. The hull planking is especialy good, considering the bluff bow is a challenge. I once read that the white applied to the bottom of the hull was some kind of coating to discourage marine growth. Quite toxic in fact. I don't know how effective it was. I like the white too and used it on my Unicorn. Anyhoo, thanks for all the great photos, and I'll continue to follow your log. Peter
  15. petervisser
    Hi Steve, I've just stumbled onto you log and have really enjoyed watching the progress so far. I have built the older version of this Billing kit years ago, and seeing your log takes me back. I have also noted some of the building techniques you practice, and I'm hoping to get some ideas. You have some obvious talent as a carpenter. I have just subscribed to your log and look forward to following your progress. I would be interested to learn your plank tapering technique. I have used an xacto knife and sanding block in the past, but your method looks professional. If it's easy to explain I would really like to hear about it. Ahhhhh, I just looked back at your tapering technique and I think I figured it out! That is slick! Now I just have to look back at your plank cutting jig... Happy building! Peter
  16. petervisser
    Hi Primey, I'm a user of copper tape for my copper bottomed hulls. I have used it on my Bounty and E'toile with satisfying results. Being an adhesive tape, there's no glue involved so it's quick and easy. I'm a fan of "quick and easy". The tape is also thin enough that a rebate is not necessary. Hope this is a help. Cheers, Peter
  17. petervisser
    Hi Primey, I just ran across your CS log and just wanted to chime in on your great planking work so far. I am also a Cutty Sark builder so I'd like to follow along. It will be interesting to see the materials and fittings supplied with the kit as your build log progresses. The wood looks to be in great shape for such an old kit. I have never heard of this kit manufacturer, and I suspect you're the only member on the site with this kit. A unique build log, to be sure! Have fun! Peter
  18. petervisser
    Too true Patrick. I also have an old Billing kit and have been replacing the old warped wood with newer material. However, having built several Billing models, I can say that talented builders like yourself can bring out the best in them. It just takes a little extra care and attention. Cheers, Peter
  19. petervisser
    Stunning model Patrick. I think we can put the debate of poor model quality by Billing to rest. You have built a lovely model so far. Thanks for all the photos. Peter
  20. petervisser
    Your model looks fantastic Jens. A real inspiration to get the lead out in my own shipyard. Thanks for all the updates and photos. Peter
  21. petervisser
    Fantastico Mark! What a bruiser of a ship, once you see the size of the hull. Thanks for the update. Very inspiring. Peter
  22. petervisser
    I'm really enjoying your build log Mark. You have taken great photos and it is a pleasure to look at your work. I can't wait to start my own Royal William. With three amazing build logs to go by on the site, it should be a piece of cake....just kidding! Looking forward to more posts! Peter
  23. petervisser
    Time to add the railing to the cabintop... I made the railings to measure in the model and then removed them for painting. That just about does it for this part of the build. Now onto other deck structures....
  24. petervisser
    Time to dress up the cabin roof with some planking and trim... The advantage of a 50 year old kit and its wood become apparent when you're looking for some planks with a curve along their horizontal length! I needed them to follow the fore and aft contour along the sides of the cabin top. Here the deck planking is being installed along with the "caulking".
  25. petervisser
    The skylight needs glass and for this I use a floppy disk. And you thought they were obsolete! I simply glue the disk onto the skylight roof. Easy-peasy! Here it is finished.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...