Tigersteve

Agreed- please do not paint this. It looks great. 
Steve

Behold the stern completed. When creating the windows, I did not cut the 1/16” framing tape down to 1/32”. At the time I did not think it would make much of a difference, but at this scale it does! After the windows were mounted on the ship I added 1/32” x 1/16” wood strips on the top and bottom to create a thinner reveal of the white tape around the windows. This helped. 
 

The knees were created in cherry as shown in the photo. As with many parts of the project, I figured the stern would be easy. I was proved wrong, as I had to make many adjustments to accomplish acceptable results.

I am learning not to linger too long on a particular part of the project, only redoing things that look out of place or inconsistent with the rest of the ship. 
Steve

Over a month of fiddling with creating these bow pieces. I used Stuntflyer’s advice of soaking in hot water to create the severe curves. A couple rounds of bending were required. A hairdryer was used as well. Glad to move on from here!

Steve

Looks great. Consistent with your presentation of the 18th century longboat! 
Steve

That was impressive!

Steve

Bulkhead templates are secured to the hull. I’m glad to have this step finished. 
Steve

I redid the metal rings around the gratings because they were loose and drilled the mast holes. Finally, the bulkhead template install is in progress. It’s not as easy as I thought. It took a couple of glue sessions to secure the first template. I’m making some supports so I can clamp down the next template properly. 
Steve

Congrats! Very nice work!

Steve

Here’s a couple sites to check out. Have not used them myself. The ones I used don’t seem to offer what you need
 

https://www.ttplasticland.com/products/acrylic-display-case?srsltid=AfmBOoo9eoBuQwHC1ql7_2kjnMWaUFpLD4PyAp2VcHKFNevTj9VJBK4M
 

https://pleximart.com/?srsltid=AfmBOoo1hSpvoTvGuE9w1rog3mQ-DbKJMelmkxB6WJ_Zw-s-bOhM9XdD

Inboard planking of the bulkhead templates is complete. Today I created the windows and drilled holes for the masts. 
Steve

Making slow but steady progress on the bulkhead templates. 
Steve 

Looks really good and clean. I’m sure the rigging will look awesome
Steve

A small update, but one worth posting for me. Back on track with the Mayflower build. It is full speed ahead as I work on the interior planking of the bulkhead templates and redo the metal work for the door handles. The first planks on the templates are basswood, as they will not be seen on the model. The remaining planks will be cherry. 
 

I had a small surgery in the last few months, but mainly I have been procrastinating on this metalwork. It’s good to be back. I ordered a cheap optivisor and some thin CA glue. Hopefully it will be easier to work with than the medium CA that I have. 
Steve

Congratulations!

Steve

Perhaps he was infiltrating other workshops. 😎

Steve

Wow, great progress. I really have to get back to mine!

Steve

Wow! 

Steve

It’s perfect!

Steve

Looking really good. The copper plating aged nicely. 
Steve

Congrats!

Steve

Keep up the momentum. It’s looking great Erik. 
Steve

Looks really sharp Erik. I’ve found WOP on painted surfaces does not work for me. Too shiny. Not much help, I know. Looking forward to how you proceed w the model and the finishing. 

Steve

Congratulations!

Steve

You could easily charge at least $850 for this. I’m not sure what the wood cost is, but I’m sure it’s extensive. Shipping alone will be expensive. Those two chapters really give builders a solid foundation for a great model. People are paying for the quality of your design and kit. (Maybe Mike has a better opinion since he’s built many of your newer kits.)

Steve

Looks really good. 
Steve