Jump to content
2025 NRG PHOTOGRAPHIC SHIP MODEL CONTEST WINNERS ANNOUNCED ×
Check out our new MSW Sponsor Innocraftsman ×

Ondras71

Members
 View Profile  See their activity

  • Posts

    435

  • Joined

  • Last visited

 Content Type 

Everything posted by Ondras71

  1. Ondras71
    With the completed model, I participated in the Czech Championship 2018 in the C8 category and here is the result.. O.
  2. Ondras71
    With the Proxxon TG 125 / Ebrousím these surfaces .. O.
  3. Ondras71
    Hello. I was also dealing with how to make clean edges on the gunports. On the internet i found a simple way of hand-making this. I mark the ends of the boards with a hole-shaped cork, cut it out roughly and then grind it with sandpaper on a strip. After some testing, it works.... I use the Proxxon TG 125 / E front disc grinder to grind the board ends. If needed, I slowly turn it by hand taking less material... O.
  4. Ondras71
    Beautiful work Marsalv. I'm looking forward to a personal tour of your boat at the Czech Championship 2018 !!!!
  5. Ondras71
    A very good result Zappto..
  6. Ondras71
    Incredibly clean work Amalio !!! I still admire .. O.
  7. Ondras71
    I put the gunports on the left, the left is working ..
  8. Ondras71
    Thank you very much Louie da fly.. I continue laying planks between gun ports, but it's very slow.. I received brass material ordered from http://www.litomysky.cz/mat/mso.htm I ordered a 0.2 mm sheet, tubes ranging from 0.3 to 1 mm and wires from 0.2 to 1 mm. Material is great.. The first door hinges are made..
  9. Ondras71
    Before placing the curved planks, make a paper form, according to it bend the boards sideways and then according to the hull. do not create a clinker surface .. it's a wonderful job. You are going very well! Ondras.
  10. Ondras71
    Very nice and original building !!! O.
  11. Ondras71
    Doors placed in frame, frame bent over a template, wood shortly boiled in water .. First attempts to produce fittings. 0.2 mm brass sheet out of frames from accessories from HiSModel.com .. Still thinking about having the fittings etched, the result would definitely be better, but maybe after trying longer I'll manage to make it ..
  12. Ondras71
    Thank you! Presentation of the building with music here:
  13. Ondras71
    While drying the planks I started making doors. Soon I will need first ones for the mirror. I was so into it, that I also made all the door wings and prepared a form for frame bending.. O.
  14. Ondras71
    I agree the larger draft is better. Your work is admirable. It's a beautiful sailing ship, and actually a functional one. I guess my wife is going to be forcing me to these results as well. Ondras
  15. Ondras71
    Thank you Backer!! After a long break I started laying planks over the wales .. I picked up and made a tool for safe sanding of planks to create narrow strips around the gun ports.. I bought additional clamps, four sizes of office ones and the commended MT 70 clamps with 11 cm jaws..
  16. Ondras71
    Hi Doris. Your results are becoming more and more astonishing to me. O.
  17. Ondras71
    After raising the sides.. ..I modified the shape with balsa .. The hull is ready for the outer cladding up to the colored part of the sides.. I found a Czech beer of the right year..
  18. Ondras71
    Thank you GrandpaPhil.. I prepared the keel on the stand .. Pins between wales, approx. 3,300 pins placed .. I cut the spruce into 1x5 mm strips.. And increased the base of the hips with the 2 and 1 mm layers, That makes it 3 mm strong, on that comes the outer and inner cherry planking ..
  19. Ondras71
    I'm getting more and more like your beautiful and clean work. I'm losing my hat. O.
  20. Ondras71
    I've finished pinning the lower mirror. There's no pins at all in the plan. I was looking for a suitable pattern, I found it in the Prins Willem monograph.. I altered my pins a bit in a way they would look on a smaller ship..
  21. Ondras71
    The pins placed at the bottom of the sides..
  22. Ondras71
    As the Ulises Victoria writes. Surely you'll be adding detail photos of the ship from all directions. Thanks Ondras
  23. Ondras71
    Impressive ship, impressive scale !! For a beautiful model the house is never small .. Do you share with us other ship details ...? Ondras
  24. Ondras71
    Somewhere I read that the pins are like Braille... I guess it is true, I quite enjoyed reading these lines .. The polished left side.. After waxing the pins are well noticeable..
  25. Ondras71
    Your work still rises upward Marsalv. I admire and support .. Ondras71

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...