Jump to content
MSW Spring Donation Drive

Ondras71

Members
 View Profile  See their activity

  • Posts

    401

  • Joined

  • Last visited

 Content Type 

Everything posted by Ondras71

  1. Ondras71
    Thank you, Backer Treenails on the front wall.. O.
  2. Ondras71
    Thank you very much zappto!! Front deck.. I wish all model builders all the best in the New year 2019. Ondras71
  3. Ondras71
    left side finished .. hawse holes, waxed..
  4. Ondras71
    Very good and clean work! I sink my hat .. O.
  5. Ondras71
    ...O. Right side...
  6. Ondras71
    Finally, another ship from the turn of the 16th and 17th century. I'll love to keep watching this original construction..
  7. Ondras71
    Lower deck drainage. The De Zeven Provincien reconstruction from 1665 has the drainage well portrayed.. I had already drilled the drain slope a long time ago.. The first one...
  8. Ondras71
    I also love to look at a metal ship model if it's beautifully created like this ..
  9. Ondras71
    Wonderful work !!! The first POF? Surely you have been doing this for many years, that ...? !!!!
  10. Ondras71
    Doors were provided with 0.5 mm nails, 0.4 mm for the windows. They're also waxed .. I planked the front wall and placed windows and doors on it .. I wonder, if I should place pins or nails in the front wall aswell.. In addition, I'm preparing to drill holes for the big nails on the wales, they're on the plan but, after a closer look, in the wrong distance.. Of course I am placing the nails (studs) into the ribs, clear logic .. O.
  11. Ondras71
    Work on the front wall .. Window and door in wax ..
  12. Ondras71
    Hello. Here I stitched the sails according to the dimensions. All you need is an agreement.. O. https://www.hismodel.com/articles-category-23
  13. Ondras71
    Small shift. I raised bases of the hips made of overlayed 2 and 1 mm spruce planks. The top edge of the railing has been drawn, polished and painted with adhesive for reliable attachment of the outer planks.. Mirror doors lined with planks... and pins placed..
  14. Ondras71
    Hello marsalv. Great start! I'm tense .. O..
  15. Ondras71
    Beautiful wooden cladding with pear planks, is not it a shame to cover the color ...? I hold my thumbs to continue building. O.
  16. Ondras71
    Thank you very much Hubac s Histian a Backer.. I made a bowsprit.. The first door on the rear wall is fitted to the already used wax.. O.
  17. Ondras71
    I think the problem was with starting by following the kit accurately, e.g. wide deck boards and gaps between them. After that, I started studying more. But I'm still happy as it is. I also found out that little would be enough to make the kit more accurate, but the manufacturer probably doesn't want that or it would be too expensive. Thank you very much for your feedback! Ondras71
  18. Ondras71
    With the completed model, I participated in the Czech Championship 2018 in the C8 category and here is the result.. O.
  19. Ondras71
    With the Proxxon TG 125 / Ebrousím these surfaces .. O.
  20. Ondras71
    Hello. I was also dealing with how to make clean edges on the gunports. On the internet i found a simple way of hand-making this. I mark the ends of the boards with a hole-shaped cork, cut it out roughly and then grind it with sandpaper on a strip. After some testing, it works.... I use the Proxxon TG 125 / E front disc grinder to grind the board ends. If needed, I slowly turn it by hand taking less material... O.
  21. Ondras71
    Beautiful work Marsalv. I'm looking forward to a personal tour of your boat at the Czech Championship 2018 !!!!
  22. Ondras71
    A very good result Zappto..
  23. Ondras71
    Incredibly clean work Amalio !!! I still admire .. O.
  24. Ondras71
    I put the gunports on the left, the left is working ..
  25. Ondras71
    Thank you very much Louie da fly.. I continue laying planks between gun ports, but it's very slow.. I received brass material ordered from http://www.litomysky.cz/mat/mso.htm I ordered a 0.2 mm sheet, tubes ranging from 0.3 to 1 mm and wires from 0.2 to 1 mm. Material is great.. The first door hinges are made..

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...