knightyo
-
Posts
514 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by knightyo
-
It might be somewhat torturous, but how about building/painting BOTH sets of aircraft? That would allow you to change them out annually, or whenever the whim strikes! They won't be adhered to the deck, will they? Alan -
Is it possible to like a post around 20 times? I'm really looking forward to this one. Alan
-
Looks like Danny incorporated a king plank as well. I don't think I can go wrong following his and Chuck's lead, and will start drawing the decking plan accordingly.
-
Ok, I should have the opportunity tomorrow to draw out the Lower Deck planking pattern.... Chuck's Confederacy plans call for a single plank to run down the center of the deck, and planking outward from the "king" plank to both sides to the bulwarks. What is the general consensus for Triton? Would it have had the king plank in the center? As I look at the cross section midships .pdf, it looks like there is not a king plank in the center.... Alan
-
This made me lol and lol. I have a few of these projects as well. 😀 The ship looks great so far! Alan
-
I also built this model as a kid. It was the neatest model of the bunch! Alan
-
Hi Jacek, By looking at the templates (Stern Part Legend, SternParts & Upper Counter Planking), you should be able to mark out the stern areas pretty well. The below pic also shows the numbers of planks in each area on a similar sized ship.. (similar, but definitely not exact).. Not sure if the number of planks in each area of the Triton would be the same, but I think it would be pretty close.. I don't have the Anatomy of a Ship Series covering frigates, unfortunately. I'll bet that would show the exact planking structure....(Hint for anyone who has that book to please look ) Alan (Photo reference is from http://wp.patheos.com.s3.amazonaws.com/blogs/yimcatholic/files/2011/10/HMS-Surprise.jpeg)
-
The stern timbers were kinda fun. On mine, I inserted "filler" limewood pieces between each timber, which made it pretty easy to achieve a smooth surface for future planking. The photos in my journal look horrifying, but the surface is actually very smooth. Aaln
-
Hi Jacek, I can't wait to see how your lower deck fits between the frames, especially in the bow section. I had "challenges" in that area.. Alan
-
Thanks Chuck! (I haven't forgotten about Syren either). 😊
-
Hi Jacek, I've used basswood (I think it's known as limewood in your area?) for everything so far, since it's so easy to shape/sand. It's a great "filler" type of wood. I'll be using pear wood however, for anything visible, and maple for the deck planking. I do think a person could probably plank the entire lower decks with 1/8" x 1/16" basswood/limewood planks, as they wouldn't be as visible, and could easily be stained. They are very inexpensive, pre-cut, and easy to use. In fact, a person could build the entire ship in basswood/limewood, and stain/paint to their preference. I just really like the look of pear wood, and how it can be treated to look "old". I also do still intend on posting a sample deck planking pattern for people to critique when I'm able to start building again. One or more of the templates in the cross-section download area shows a view of the ends of the planks so you can scale the templates to 1:64 and measure the correct thickness/width. Alan
-
I thought it was funny that Bubblehead didn't object to question #2.😀
-
Lol @ no to Q2. 😀 It's going to be a lot of fun to see the bulkheads assembled! Hopefully I'll be back home in a month or so, and can make some progress as well.. Alan
-
Hi Jacek, I am also hopeful for responses to your questions, as I have the same questions! I'll be plodding along behind you as life allows me free time to build... Alan
-
Greg, Do you show how you affix the brass rod pedestals to your models in any of your logs? I was going to go thru your logs again to see, but am lazy of course, and thought I'd just ask. Alan
- 405 replies
-
- 6
-
-
- tamiya
- king george v
- (and 2 more)
-
If I built a full size boat, it would have 4x4 lumber for frames, as I "overbuild" everything I do in "real life". But yes, I take your point.
- 421 replies
-
- 3
-
-
- medway longboat
- Syren Ship Model Company
- (and 1 more)
-
I'm going to have to do this at some point; it's just too cool of a project to pass upon. For me, I'd do it fully rigged, but all in pear with no paint. Chuck, any possibility of a 1/64 kit version for those of us with 1/64 Syren's/Confederacy's/Lexington's/Triton's on the blocks? (omg, I know)..... I'd love to have all of my eventual "wood" ships in the same scale tho, even though this would be pretty small. That actually really appeals to me. Alan
- 421 replies
-
- 3
-
-
- medway longboat
- Syren Ship Model Company
- (and 1 more)
-
Thanks guys! That was fantastic info. I've told myself that I'm not allowed to start a new project until I finish my Syren/Triton, but I'll eventually join in with you guys unless you've modeled the entire navies of all countries by the time I'm ready. lol Alan
- 1,090 replies
-
- 6
-
-
- showcase models
- vendetta
- (and 2 more)
-
Here's a random question... Who do you guys think supplies the best photo-etch materials? Eduard? Tom's Modelworks? Gold Medal? Pontos? I've been looking for a 1/350 set for Tamiya's Fletcher destroyer, but really don't know which supplier provides the best etch! Alan
- 1,090 replies
-
- 5
-
-
- showcase models
- vendetta
- (and 2 more)
-
1:64 Copper plating
knightyo replied to Peter Y.'s topic in Building, Framing, Planking and plating a ships hull and deck
Hi Peter, I also recommend taking a look at Chuck's instructions for a copper plate building jig. I overlapped mine (below), and have been happy with the result. I do like the "nails" to show, even though they are larger than they should be. I think they make the model look more interesting from a distance (bottom photo), than if the copper was just smooth... Alan
- 14 replies
-
- 3
-
-
- pickle
- caldercraft
- (and 1 more)
-
Hi Phil, Looking forward to watching your progress! Alan
-
After I'd finished painstakingly planking my Syren deck, I was extremely excited to apply a Mastic as a final finish. Unfortunately, I'd used Sharpie "permanent" markers to color the edges of the planks, and the Mastic reacted with the ink; my pristine deck looked like someone had slathered mud all over. The next day, a light sanding was able to restore the deck, and now I can look back on that experience and just chuckle. The beauty of our hobby is that we can usually recover our projects when bad things happen. P.S. The mug.... Children are Maggots... lmao.. I must have one.
-
I've been trying to order the maple planking from Woodprojectsource for two days now, but keep getting the message that the site is down for maintenance. It's a little like torture! lol. I think I'll draw out a sample planking pattern on the templates, and run it by you guys for your thoughts. Alan
-
Aldo, thank you so much for that information! I had assumed 100% that I'd be nibbing the planks, and would have done so if I had not seen your post. Alan
Our Emblem ®
