Jump to content

AON

NRG Member
  • Posts

    2,584
  • Joined

  • Last visited

Everything posted by AON

  1. Thursday (evening) 27 November 2014 Completed assembly of the trestle trees - dry fit last block - marked location - glued and clamped will lightly sand tonight and make the two caps I also cleaned (vacuumed) off the hull which revealed a couple more minor dents that were filled And I determined the sizes (diameters and lengths) of the booms and gaffs (again by ratios) and cut my material Still plan to start painting this weekend!
  2. Thursday (morning) 27 November 2014 sanded the bow cowling assembled and clamped part of the trestle trees time to go to work
  3. Wednesday 26 November 2014 Glued and pinned the bow cowling - cut off the excess wood pins with a carving knife - sanded flush - clamped down Drilled out the port holes - measured and marked locations - scoured outer marking with 7/16" diameter brad bit. this will outline the recess or spotface for the clear plastic window to be set into - drilled through with a 3/8" diameter brad bit holding a back up piece of scrap wood in behind to avoid spinters It happened on the second hole I did and then I was worried. I hit a nail! Used mini chisels to cut around the nail and through the wood Used small files to cut off the nail and shape the hole Turned the main and fore topmasts on the lathe using a wood rasp file and sand paper - cut off excess on band saw - put the mast into the chuck of my drill press and finished the shaping with sand paper - squared off the foot with the belt sander
  4. Thank you everyone for the encouraging words and votes of confidence in my drastic action with the cabin height I have pieces of plastic to use as window glass for the port holes and am thinking of drilling four holes through the cabin bulkhead, countersinking slightly to set the faux glass in, white washing the inside of the cabin so if looked into it is a bit brighter. Monday 24 November 2014 - Drilled and pinned the cheeks to the masts with a slight interference fit (no glue) so I won't have to worry about this falling apart - cut the pins off flush and lightly sanded - cut and sanded the trestle tree pieces Tuesday since I am up early this morning I may as well go do another sanding of the hull as painting her will happen soon
  5. Part 2 Went back to the masts and started on the cross tree assemblies - marked the location of the support cheeks - rasped, filed and squared off cheek pocket with a knife - made a stiff paper template of the cheek and fit it to the pockets - transferred shape to wood and cut out with the scroll saw - sanded to shape - dry fit and finally glued and clamped in place to set overnight I then worked on the cross trees 4 trial pieces (you can call them errors ) before I got anything near what I was attempting. Trestle trees will be next
  6. Sunday 23 November 2014 Part 1 Worked on the cabin port hole rings. My inspiration was a garden hose snap on O-ring as it seemed the perfect size. After numerous attempts with the lathe I had to come up with a plan B - set up dowel in clamp, squared to drill bit and drill hole though the end (the tough part was centering it) - cut four pieces about twice as long as needed on the band saw - prepared a "holder" and square up ends and thinned to size on disc sander
  7. PART 2 I couldn't take it anymore! I've tried to ignore it but it was sticking out like a sore thumb I tried convincing myself that it was one of the few things the gentleman had done and I should leave it alone.... but then I talked myself into believing he will likely never notice. I also believe it is easier to get forgiveness than permission so it did it! I cut the cabin height down to get it more into a proper scale Of course this meant redoing the door.
  8. Saturday 22 November 2014 (PART 1) Completed the handrail stanchions - drilled - deburred - reclamped in vise to straighten face and turned 90° to straighten edge - drilled again - polished with wire brush wheel on dremel with my dremel clamped in a vise I also sanded the deck and filled cracks and dents It will need another sanding
  9. Further progress will come to a crawl as I'll be back to working overtime this week.
  10. Sunday 16 November 2014 (Part 3) Worked on the masts Calculated (by ratios from an image) the scale length and diameter of the masts 5/8” diameter, 14.1” and 15.5” long Calculated the rough locations and set angle of the masts Set the hull up to my drill press at 3° angle and drilled two ½” diameter holes for the masts to be stepped into. Found some 5/8” diameter dowels and cut them 4 inches longer and mounted them in the lathe Turned the deck stepped fit portion 0.510”+ diameter to fit (Tapered the lead end to assist assembly) Turned the top end to +/- 0.400” diameter Tapered the length between and sanded in place on the lathe. Dry fit into deck (not driven in as I would not get them apart again) to check. I am happy with these. I have not made the cabin port hole pieces yet.
  11. Sunday 16 November 2014 (Part 2) Made a new ships wheel Re-drilled the spoke holes Turned the wheel on the lathe and once again the hub vaporized This time I saw it happen. The holes (thru what would be the hub) remove all structural integrity in the material and it tears apart. Did my final cut to part it from the dowel on the band saw Cut a smaller dowel to make the hub Of course it was not “square” so I drilled a shallow pocket hole (big enough to fit the hub into) in a piece of scrap and used it to hold the hub square against the disc sander to true it up. Cut my spokes to length Installed them in my drill press chuck and used small files to shape the handles. (I should be wearing safety glasses but it was so tiny I couldn’t see what I was doing… I had to look over my lenses to focus… getting old sucks) Dry fitted and remarked the shorter lengths for the spokes. Drilled another pocket holder and disc sanded the spokes square to length Reassembled and glued (small dabs) from the backside. Drilled and installed a brass pin nail as the hub pin.
  12. Sunday 16 November 2014 (Part 1) Drilled and dry pinned the cowling to the bow Sanded to finish shape
  13. Thank you Druxey It doesn't look like much but it is making good use of scrap pieces and surprisingly did the job I admit I was concerned it might fly apart.
  14. Saturday 15 November 2014 Today I find myself a year older but not one iota smarter! I completed my test piece on the lathe and was very happy with the results so I decided to do the ships wheel. I set my predrilled doweling up and began cutting away. The centre hub, a crucial part of the wheel, vaporized in front of my eyes. Never giving in I decided I could make a new hub so I carried on. Completed the outer part and set it against the wheel gear house. Decided it was too thick so I sanded the two faces to thin it down. This is when it happened. I thought I had learned the lesson of knowing when to say ‘when’….. it was now too thin. Into the trash bin! Time for a ‘do over’. I started on the bowsprit cowling. Set up the piece on my drill press at what I determined to actually be closer to 6-1/2° angle (4 separate readings) and plunged into it. This, to my surprise, worked out okay (photos below) I will eventually drill, pin and glue this to the deck and then sand the outside face to blend in to the hull. I then worked on the Bowsprit Bitts and Samson Post assembly. Having completed them, dry fitting to check I moved on to shaping the bowsprit (photos below) I mounted the bowsprit to my lathe and turned/tapered it to rough shape. I then finished it on the lathe with sand paper. Dry fit it all together and found I needed a wee bit of shaping on the cowling. Now I am happy. Went to Michael’s (hobby & craft store) and bought some brushes and paint (primer, black, dark red and white). Also picked up a tube of wood stain at Canadian Tire which I am hoping will work better on the cabin roofs. Once I have the masts located, all holes drilled and the deck sanded it will get a good cleaning and then a paint job. But for now I need to redo the ships wheel and make four port holes for the cabin.
  15. Friday 14 November 14 Managed to recut the Samson Post (still requires some shaping in the top 1/3) - Dry fitted with Bowsprit - Set up to measure angle (8°) of assembly so I can set up the bow cowling angle for drilling the bowsprit hole Also did some practise cutting on my wood lathe for the ships wheel shaping - Turn round - Cut out centre hub - Mark part line I will finish this one to make sure I am happy with it and then do the real one that has been predrilled for the spokes As this looks like a good port hole cover for the cabin I may do the same thing with smaller dowelling Hope to accomplish considerably more this weekend.
  16. Framed and Hung Decided to add a bit of artistic look by cutting it clear of the bolt rope with a ragged edge The frame is see through both sides so I can look at the reverse if I need to refresh my memory of the work on that side.
  17. Sunday 09 November 2014 Redoing the Samson Post as I decided the first attempt wasn't good enough Also clamped down the bow cowling or faux gunwhale in readiness to drill the bowsprit clearance hole
  18. For those following and wondering what happened to my progress here... I have switched gears and have been working on the schooner CHARLIE for a friend. Hope to be back to my first order of business early in the new year.
  19. Progress may slow down as my working associate (salesman) brought in a few orders and it has me working overtime. At least I can blame it on him this time.
  20. Good morning world I am feeling exceptionally chipper this fine Sunday morning having spent two days attending the sail-making seminar held in historical Niagara on the Lake (a 34 minute drive for me). What a fantastically wonderful experience! I am relatively new to all this and felt I should mention the comradery you feel from the help you get on this site DOES actually extend to real life meetings. Of course my sorrowful looking first attempt at a sail is nothing to brag about but I have never learnt so much about 17th century sails (and other off menu ship building tidbits) that I just had to post a review. I am actually thinking of framing and hanging my first miserable sail in my workshop as a reminder of the experience. Just felt I had to share this feeling I am having. David Antscherl is a wonderfully knowledgeable and patient instructor. Unfortunately Greg Herbert could not be there; I was so looking forward to meeting the gentleman. I said it before and I'll say it again (and again, and again ....) what a wonderful site and fantastic group. Thank you. Alan
  21. Tuesday 04 November 2014 cut the shape with my scroll saw lightly sanded needs more shaping and a clearance hole for the bowsprit but here is the idea by my calculations the bowsprit should be approximately 0.4666" dia and 4-1/2' extension beyond the bow the dowel is 7/16" dia = 0.4375" PS: forgot to mention the warts... I cut one piece backwards and had to start it all over
  22. Had some time to kill this morning before I go to the doctor's office to get my flu shot so completed the outine on the addition for the bow and took some photos. I will cut it out tonight or tomorrow and will scallop it to suit the bowsprit when that item is ready. I also took a photo of the lathing material before and after planing so you can see what was revealed under 100 years of hanging on a wall under plaster.
×
×
  • Create New...