Mirabell61 Posted May 27, 2015 Author Share #31 Posted May 27, 2015 Pete, thank you for your nice comment Nils Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
popeye the sailor Posted May 27, 2015 Share #32 Posted May 27, 2015 what I have is a plastic kit Nils.........1:400 would be more of a feat. I really like the contours of the stern keel......gonna look so cool when you get round to fleshing her out. very interesting set up to be sure......and you sure started it off with a bang! those props look really neat! Omega1234 and Mirabell61 2 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch Link to comment Share on other sites More sharing options...
Mirabell61 Posted May 27, 2015 Author Share #33 Posted May 27, 2015 Popeye, thanks for your comment... I have now smoothend down my shipyard building base, (my Little slipway) that has already been used for frames Setup on "Pamir" and "Heinrich Kaiser" hull , its just Long enough for KWdG as well. When all the self drawn Frames set up in well straking alignment way without much fairing of the contours and the stringers fit into the foreseen notches that will be another importent sequence in the hull making. I made good experience with a strong "spine" fitted above the keel, and due to the models length I`ll do this here as well Nils mtaylor, Martin W and Omega1234 3 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
flyer Posted May 27, 2015 Share #34 Posted May 27, 2015 Hi Nils This will be a beauty. I’m looking forward to a very interesting build and would like to thank you for sharing this experience. Cheers Peter Mirabell61 and Omega1234 2 Quote current build: The Naval Cutter Alert by flyer - Vanguard Models - scale 1:64 completed builds: HMS Bellerophon by flyer - Victory Models - scale 1:72 Yacht America by flyer - Mamoli - scale 1:66 - with some alterations Dolphyn Corel 1/50 Wasa Corel 1/75 La Gloire C.Mamoli 1/90 HM Bomb Vessel Granado JoTiKa HM Bomb Vessel Granado 1756 CC kit 1:64 Victory Models 1/64 HMS Pegasus by Flyer HMS Pickle, my interpretation Link to comment Share on other sites More sharing options...
yamsterman Posted May 27, 2015 Share #35 Posted May 27, 2015 Hi nils Lovely stuff! Beautiful rendition in brass...fiddly too! You and Johann must have had the same metal work teacher! Looking forward to lots more. Cheers....mick Mirabell61 and Omega1234 2 Quote Link to comment Share on other sites More sharing options...
Mirabell61 Posted May 27, 2015 Author Share #36 Posted May 27, 2015 (edited) Thank you for your words Peter, I`m very happy to share this with others and all who ever likes to stay tuned to this log will go through ups and downs with me, as the build sequences will have to be prepared as the minimum for the next stage requirements, and as they come, in lack of neigther a building instruction nor a finished building plan. In the moment I`m confedent that I`ll stand it through Nils Edited May 29, 2015 by Mirabell61 Martin W, mtaylor and Omega1234 3 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Mirabell61 Posted May 27, 2015 Author Share #37 Posted May 27, 2015 Hi nils Lovely stuff! Beautiful rendition in brass...fiddly too! You and Johann must have had the same metal work teacher! Looking forward to lots more. Cheers....mick Thanks Mick, It realy was tricky with the soldering, with the second prop it hapened once (only payed a second less attention to the heatflow than I should have.... per gas tourch) and all 4 blades dropped from the hub, as I was soldering on the last one, causing a delay and keeping cool to get everthing set up for a new try again Nils Martin W, mtaylor, Angarfather and 1 other 4 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
yamsterman Posted May 27, 2015 Share #38 Posted May 27, 2015 Been there ...done that nils. Always tricky holding multiple parts for soldering. I recently invested in a couple of jewelers ceramic boards.....the ones with lots of holes in and some appropriately sized tapered steel pins. I may yet get some carbon wire as well . definite help withtricky soldering jobs. Cheers....mick Mirabell61 and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
Jim Lad Posted May 28, 2015 Share #39 Posted May 28, 2015 Beautifully made propellers, Nils. Now all you have to do is remember to put them on the correct sides! John mtaylor and Mirabell61 2 Quote Link to comment Share on other sites More sharing options...
Piet Posted May 28, 2015 Share #40 Posted May 28, 2015 Great start of a beautiful ship Nils. Love to watch you work the details. I'm still planning on building a model of my father-in-law's little freighter, the Musi of the KPM. Cheers, mtaylor and Mirabell61 2 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum) Link to comment Share on other sites More sharing options...
Mirabell61 Posted May 28, 2015 Author Share #41 Posted May 28, 2015 Many thanks to Piet, John and Mick, and to all the "likes"...... Piet, I remember we communicated about the "Musi", that will be very nice smaller coastal freighter, hopefuly you`ll get to starting it some day... John, correct, and the direction of rotation...., I would`nt mind putting them on the wrong side if I were only so far already (smile) Mick, yes I saw These ceramic hole-plates already and might be investing in one, seems to have much benefits when multiple parts soldering... Nils mtaylor and Piet 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Mirabell61 Posted May 28, 2015 Author Share #42 Posted May 28, 2015 (edited) Build log part 3 Whilst the design work goes on, I`m looking for what material resources I still have laying around that can be used without buying new.... There are still 3 of those brass candle holders that will give nice pedestals for the model`s stand, they would be conform with the stands for my "Gorch Fock" and "Pamir", and perhaps the one or other odd wooden strips from the resources bin can be used within the hull making......The base plate for setting up the frames has already been prepared and smoothend to take the third ship built on it (my shipyard slipway) Although fingers are itching to get the new hull under steam, there is the strong desire to complete my "HMS Pegasus" within due time, she is looking at me sadly all the time need to spread out (just for a moment, otherwise I`ll be in for trouble) in the admiral`s washing an ironing kitchen taken partionaly from historic documents from the web... will probably do the rudder heel and the window out cut from brass. The section also shows the stagered lengths of the propshaft bearing supports here the three left over brass candle holders, ( the threads on top will be cut off, the center drilled through) fit M4 spindle and a "knock in" wood nut for anchoring the spindle in the ships reinforcement backbone, (20mm beech sqarebar) here is my humble hoizontal "latheing" and vertical drilling station I have two power machines, a grinding device for sharpening tools, and a multi belt/disc grinder my wood bin, with the "leftovers" this little room in our home basement I have occupied for the "rough" work, fortunately I have a second larger room for the more "clean" modeling This is the base board I shall use for the new frame set up. The board where it is laying on, can be swiveled back 90° to be out of the way. The hight of this swivel-board is lower that the surrounding ones and has just the right hight for working putting the sewing machine on (when sail sewing) Nils Edited October 27, 2016 by Mirabell61 ioannis, puckotred, BenF89 and 21 others 24 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
popeye the sailor Posted May 28, 2015 Share #43 Posted May 28, 2015 nice work area Nils.........you definitely have more toys than me Omega1234 1 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch Link to comment Share on other sites More sharing options...
Omega1234 Posted May 28, 2015 Share #44 Posted May 28, 2015 nice work area Nils.........you definitely have more toys than me Hi Nils I agree with Dennis. You're a lucky chap to have such nice work areas. They make my dining table look very inadequate! All the best! Patrick popeye the sailor 1 Quote MY SCRATCH BUILT MODELS ARE: Splendid Mega Yacht https://modelshipworld.com/topic/28576-splendid-by-omega1234-scale-1500-mega-yacht/ Majestic Mega Yacht https://modelshipworld.com/topic/28483-mega-yacht-majestic-by-omega1234-miniature/ Sapphire Mega yacht https://modelshipworld.com/topic/21088-sapphire-by-omega1234-1388-scale-mega-yacht-66m-8-inch-hull-length/?tab=comments#comment-639898 Genesis - Supersports Mega Yacht https://modelshipworld.com/topic/18168-genesis-by-omega1234-1300-49m-mega-yacht-8-inches-long-finished/?tab=comments#comment-559026http://modelshipworld.com/index.php/topic/14141-shadow-by-omega1234-scale-1300-luxury-60m-mega-yacht-8-inches-long/ SHADOW Luxury Motor Yacht http://modelshipworld.com/index.php/topic/11384-majellan-by-omega1234-luxury-37-metre-motor-yacht-miniature-7-inches-approx/ Majellan Luxury Motor Yacht http://modelshipworld.com/index.php/topic/9261Rainbow-j-class-racing-yacht/?p=273543 Rainbow J Class Racing Yacht Mystic Classic Motor Cruiser Symphony Ingomar Schooner: Scratch build Dorade Schooner: <p> Lennox Restoration Warship http://modelshipworld.com/index.php/topic/9577-pandora-cutaway-dockyard-style-miniature/?hl=pandora Link to comment Share on other sites More sharing options...
Mirabell61 Posted May 28, 2015 Author Share #45 Posted May 28, 2015 Many thanks Popeye and Patrick, Popeye, my Little toolpark is realy nothing sofisticated, but still to date all ship model have somehow been built this way..... Patrick, I`m lucky to have two of the basement rooms in the house.... now I`ll better be cutting out the Frames and do a dry set up, I`m so curious if the hull contour will be straking well without Major adjustments Nils popeye the sailor, mtaylor, Omega1234 and 2 others 5 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Mirabell61 Posted May 29, 2015 Author Share #46 Posted May 29, 2015 Build log part 4 Today is keellaying day, ...... the base plate has been reinforced underneath, and is now absolutely flat, and first preliminary frame set up of 26 single removeable frames, to see how the contours are straking, and what amount oif fairing to the outer frame contours shall be necessary. Then the positions notches for the stringers will be checked resp. corrected, before they are cut out. Also the keel will be fitted in as well as the stern- and bow post areas. The strong "spine" can be clearly seen here. I`ll cut away many of the dead wood inside the frames, leaving only the convex deck beams and reinforcements where necessary, where visable decks will be fitted later on. The 6 mm dowels to resemble the propshafts will be replaced later with brass tubes. The different color of the frames is due to the use of leftover ply, I gathered over the years. bottom side of reinforced baseplate upper side, with pencil centerline and lines for frame-distances the pile of frames the admiral was so kind to hold the "shipyard"...... ..... aft view different ply, in color and thicknesses Nils Dubz, kees de mol, mtaylor and 33 others 37 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Mirabell61 Posted May 29, 2015 Author Share #47 Posted May 29, 2015 Crackers, thanks for joining in on the KWdG build, and many thanks also for your lovely and kind complement which is much appreciated Nils Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Mirabell61 Posted May 29, 2015 Author Share #48 Posted May 29, 2015 Peter, thank you for your nice comment......, I hope that one day it will turn out a little bit like your super KWdG museums model...... BTW... I sent you a PM on 27.05, have you read it ? Nils Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Omega1234 Posted May 29, 2015 Share #49 Posted May 29, 2015 Hi Nils Great job so far. I recall that you were concerned that some of the frames may need adjustments but you needed to have them assembled before you could really tell if that was the case. Now that your frames are assembled, do you think you need to do much adjustments to their shapes, or were they spot on? Also, judging by the expression on your Admiral's face, I can tell that she was as proud as punch with what you've done so far. I would be as well! Another thing that struck me was the complex shape of the aft frames, particularly the way they're shaped to compensate for the propeller shafts. I'd imagine that planking around there would be fun! All in all, a major milestone reached! Look forward to more. Cheers Patrick Martin W, Piet and Mirabell61 3 Quote MY SCRATCH BUILT MODELS ARE: Splendid Mega Yacht https://modelshipworld.com/topic/28576-splendid-by-omega1234-scale-1500-mega-yacht/ Majestic Mega Yacht https://modelshipworld.com/topic/28483-mega-yacht-majestic-by-omega1234-miniature/ Sapphire Mega yacht https://modelshipworld.com/topic/21088-sapphire-by-omega1234-1388-scale-mega-yacht-66m-8-inch-hull-length/?tab=comments#comment-639898 Genesis - Supersports Mega Yacht https://modelshipworld.com/topic/18168-genesis-by-omega1234-1300-49m-mega-yacht-8-inches-long-finished/?tab=comments#comment-559026http://modelshipworld.com/index.php/topic/14141-shadow-by-omega1234-scale-1300-luxury-60m-mega-yacht-8-inches-long/ SHADOW Luxury Motor Yacht http://modelshipworld.com/index.php/topic/11384-majellan-by-omega1234-luxury-37-metre-motor-yacht-miniature-7-inches-approx/ Majellan Luxury Motor Yacht http://modelshipworld.com/index.php/topic/9261Rainbow-j-class-racing-yacht/?p=273543 Rainbow J Class Racing Yacht Mystic Classic Motor Cruiser Symphony Ingomar Schooner: Scratch build Dorade Schooner: <p> Lennox Restoration Warship http://modelshipworld.com/index.php/topic/9577-pandora-cutaway-dockyard-style-miniature/?hl=pandora Link to comment Share on other sites More sharing options...
pete48 Posted May 29, 2015 Share #50 Posted May 29, 2015 Wow Nils, Looks like shes going together pretty fast . Fantastic work Best Regards, Pete Omega1234, Mirabell61 and Piet 3 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
edmay Posted May 30, 2015 Share #51 Posted May 30, 2015 WOW,It's a joy to see enthusiastic teamwork,your workshop is nicely set up.Will follow with interest,Edwin Omega1234, Piet and Mirabell61 3 Quote Link to comment Share on other sites More sharing options...
Mirabell61 Posted May 30, 2015 Author Share #52 Posted May 30, 2015 Many thanks to Patrick, Pete, Edwin, Robin, Crackers, and all the "likes"... Patrick, in generel the frames were spot on, except for 2 or 3 frames that did`nt come down flat on the base (because hooked up on the "backbone" squarebar. Should have seen that whilst preliminary mounting. I will dismount, rework / adjust those. All other will take normal fairing of outside contours. The planking of the stern areas will be an "experience" I know, but that makes out the spice in the soup Pete, many thanks, glad you like it, and stay tuned Edwin, Thank you for looking in, and you`re always welcome Robin, Thats a very nice complement I`ll pass on in the right direction, well appreciated Crackers, Thank you for the nice pic and your comment regarding to the ships history Nils popeye the sailor, Piet, mtaylor and 4 others 7 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Mirabell61 Posted May 31, 2015 Author Share #53 Posted May 31, 2015 Frames, dry- fit of parts and marking for the stringer positions. Horizontaly the stringers will follow the individual deck-levels, although the lower decks will not be fitted later. To my relief the frame outer contours are straking so well, that slight fairing touch can be done when the stringers are already permanently fit on. The keel and bowpost comprise four 5mm thick plankparts made from beech. The frames will have an 5 mm wide outcut on the bottom centerline, allowing the keel to be placed appr. 8mm further down, when the appropriate slotted keel is nearly flush with the frames the keel will come down appr. further 8mm, when the frames also get slotted the keel, when interlocked with the frames, will then touch the reinforcement squarebar here the markings for the stringer notches can be seen some of the ply-frames are only 1,5 mm thick, I had fear that they might be too flimsy, but the will be stiffened out by the stringers afterwards. Nils BenF89, puckotred, popeye the sailor and 22 others 25 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
pete48 Posted May 31, 2015 Share #54 Posted May 31, 2015 Hi Nils, Very nice , the set up looks great , beautiful work , she looks to be right on the money Best Regards, Pete Mirabell61 and Piet 2 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
LFrankCPA Posted May 31, 2015 Share #55 Posted May 31, 2015 Nils, I know this is way off topic; but please indulge me for a moment. One of my other interests is "physical science" and I noticed in your ship title something familiar 'der Grosse'. Do you know if there is any relationship to the name of the Director of the Hayden Planetarium in NYC, Dr. Neil De Grass Tyson???? Again, I apologize for being way off target; but I just had to ask.. Thanks, Larry Piet, Omega1234 and Mirabell61 3 Quote Link to comment Share on other sites More sharing options...
Mirabell61 Posted May 31, 2015 Author Share #56 Posted May 31, 2015 (edited) Hi Nils, Very nice , the set up looks great , beautiful work , she looks to be right on the money Best Regards, Pete Many thanks Pete, not familiar with the phrase.....if I guess right, you brought her in relation to Alan Jackson`s lyric/song " ....She`s right on the money....." ? NIls Edited June 1, 2015 by Mirabell61 Omega1234, pete48 and Burroak 3 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Mirabell61 Posted May 31, 2015 Author Share #57 Posted May 31, 2015 Nils, I know this is way off topic; but please indulge me for a moment. One of my other interests is "physical science" and I noticed in your ship title something familiar 'der Grosse'. Do you know if there is any relationship to the name of the Director of the Hayden Planetarium in NYC, Dr. Neil De Grass Tyson???? Again, I apologize for being way off target; but I just had to ask.. Thanks, Larry Hi Larry, Thank you for dropping in, sorry to say... no, relationship to a NYC Planetarium director, The ship was named after the former German Kaiser Wilhelm 1. in 1897, The adjective "der Grosse" is the German meaning for "the Great" Nils LFrankCPA, Burroak, Omega1234 and 2 others 5 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
LFrankCPA Posted June 1, 2015 Share #58 Posted June 1, 2015 Nils, Thanks for letting me know. Larry "der Grosse" Sorry, just had to do that.... Mirabell61, Piet and Omega1234 3 Quote Link to comment Share on other sites More sharing options...
Mirabell61 Posted June 2, 2015 Author Share #59 Posted June 2, 2015 Ongoing framework....... the frames shown in the pics before were all still plates without outcuts. Now nearly every frame will get some outcuts ( to allow access when fixing the stringers and later on the planking. Also all the notch-outcuts for the stringers are brought in....... Also the reinforcement squarebar has become drilled borings in three places for the stand`s spindles and the locking nuts every frame is secured to the base with two srews (for easy removal, and bringing into position again) the keel is now flush and interlocked with the frames up to now no whether pins nor glue have been used on the framework (all only stuck together) . After the final check on all positions I will upply PA glue, to provide the strong hold Nils mtaylor, kees de mol, ggrieco and 31 others 34 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Beef Wellington Posted June 2, 2015 Share #60 Posted June 2, 2015 Really looking forward to seeing this develop Nils, a beautiful ship. Omega1234, Piet and Mirabell61 3 Quote Cheers, Jason "Which it will be ready when it is ready!" In the shipyard: HMS Jason (c.1794: Artois Class 38 gun frigate) Queen Anne Royal Barge (c.1700) Finished: HMS Snake (c.1797: Cruizer Class, ship rigged sloop) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.