marktiedens Posted December 25, 2016 Author Share #361 Posted December 25, 2016 Thanks so much,Greg. I tend to be more critical of my work so future builders of this ship won`t make the same mistake . I could go into detail about why the wales are too low,but I would probably get cramps in my fingers from all the typing . Mark fmodajr, piratepete007 and Beef Wellington 3 Quote current build - HMS Vanguard - Model Shipways Link to comment Share on other sites More sharing options...
Greg the peg leg sailor Posted December 25, 2016 Share #362 Posted December 25, 2016 I can understand your honesty and I admire it 120%. Greg Quote "Nothing is impossible, it's only what limitations that you put on yourself make it seems impossible! " Current log : The Royal Yacht Royal Caroline 1749 1:32 by Greg Ashwood:... Link to comment Share on other sites More sharing options...
donrobinson Posted December 25, 2016 Share #363 Posted December 25, 2016 Hi Mark, I'm with Greg, way too honest. The wales, chainplates, chesstrees ......the whole ship for that matter...........looks great piratepete007, marktiedens and Landlubber Mike 3 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus Link to comment Share on other sites More sharing options...
marktiedens Posted December 26, 2016 Author Share #364 Posted December 26, 2016 Thanks Don - your thoughts are appreciated. Mark Quote current build - HMS Vanguard - Model Shipways Link to comment Share on other sites More sharing options...
marktiedens Posted December 31, 2016 Author Share #365 Posted December 31, 2016 Update - all the guns & lids are now in place so she can defend herself. The tangs on the lid hinges were inserted in small holes drilled in the hull & with the ropes attached they are fairly sturdy. The ropes for closing the lids were simply tied to the pins on the backs of the dummy guns before gluing them in place. Happy new year to all & thanks for looking in. Mark WackoWolf, piratepete007, dvm27 and 9 others 12 Quote current build - HMS Vanguard - Model Shipways Link to comment Share on other sites More sharing options...
Keith_W Posted December 31, 2016 Share #366 Posted December 31, 2016 Amazing work. Surely the RW for everyone to aspire to. She might be able to defend herself, but she ain't going anywhere without the masts Get back to work! Landlubber Mike and marktiedens 2 Quote Regards, Keith 2007 (completed): HMS Bounty - Artesania Latina 2013 (completed): Viking Ship Drakkar - Amati 2014 (completed): HMS Bounty Launch - Model Shipways Current: HMS Royal William - Euromodel Link to comment Share on other sites More sharing options...
marktiedens Posted December 31, 2016 Author Share #367 Posted December 31, 2016 Thanks Keith - speaking of getting back to work,I haven`t seen any updates from you for a while Mark Quote current build - HMS Vanguard - Model Shipways Link to comment Share on other sites More sharing options...
fmodajr Posted December 31, 2016 Share #368 Posted December 31, 2016 Mark, I am enjoying watching your progress. Great job and Happy New Year to you also! Frank marktiedens 1 Quote Link to comment Share on other sites More sharing options...
Landlubber Mike Posted December 31, 2016 Share #369 Posted December 31, 2016 Gorgeous work on a gorgeous subject Mark. Really inspiring! Have a great 2017! marktiedens 1 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: Hs129B-2 1/48 SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Eduard Sikorsky JRS-1 1/72 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans) Link to comment Share on other sites More sharing options...
Greg the peg leg sailor Posted December 31, 2016 Share #370 Posted December 31, 2016 G'day Mark I gonna be a broken record. Just brilliant mate. I wish there are another way to say it, but everyone has said it before, so ditto, ditto. You are correct when you told Keith about his RW. It's been very quiet in Melbourne - no posting coming from there! There's an Ozzie way of putting it. GET YOUR FINGER OUT KEITH. Mark I'll be waiting for your next 'little update'. Happy 2017 to you and everyone. Greg Quote "Nothing is impossible, it's only what limitations that you put on yourself make it seems impossible! " Current log : The Royal Yacht Royal Caroline 1749 1:32 by Greg Ashwood:... Link to comment Share on other sites More sharing options...
marktiedens Posted January 1, 2017 Author Share #371 Posted January 1, 2017 (edited) Frank,Mike,Greg - thanks very much for your generous comments. The work never stops here - just slows a little at times . And a happy new year to everyone . Mark Edited January 1, 2017 by marktiedens Quote current build - HMS Vanguard - Model Shipways Link to comment Share on other sites More sharing options...
medic Posted January 5, 2017 Share #372 Posted January 5, 2017 Hi Mark, She is looking fantastic. I can really appreciate the effort you've put in. Cheers, Medic marktiedens and piratepete007 2 Quote Link to comment Share on other sites More sharing options...
marktiedens Posted January 5, 2017 Author Share #373 Posted January 5, 2017 Thanks Medic! Mark Quote current build - HMS Vanguard - Model Shipways Link to comment Share on other sites More sharing options...
marktiedens Posted January 12, 2017 Author Share #374 Posted January 12, 2017 Hi all - another little update. first of all the two small brackets for the ensign staff were shaped & glued in place at the stern. Then I figured it would be a good time to build the stern lanterns. They come as a central former with 6 window sections for each one. They fit nicely with very little clean up needed. I decided to cut out the "glass" sections of the windows as I did with all the other windows on the ship. The center section of the former was painted a combination of bright yellow & orange to try & simulate a flame. The window frames were then painted gold & liquid glass maker was used to make the windows. All frames were then glued to the formers & after a little filler & some filing on the edges I finished painting the tops & bases. I didn`t quite get the look I was after,but I think they still look better than just painting the window areas. They won`t be fixed in place until much later & some side supports will be added at that time. Mark canoe21, Keith_W, coxswain and 4 others 7 Quote current build - HMS Vanguard - Model Shipways Link to comment Share on other sites More sharing options...
marktiedens Posted January 17, 2017 Author Share #375 Posted January 17, 2017 Update - The next thing I did was make up the anchors. The kit provides 4 anchors of 2 different sizes. The flukes were a little too wide so I narrowed them down & filed down the mold lines. The stocks were of the generic kind & way too fat & short,so I made some new ones with the correct dimensions. a groove was filed around them to look like 2 pieces & the iron bands were simulated by using some heat shrink tubing. New rings were made from some .8mm brass wire & wrapped with black thread for the puddening. Next,the anchor buoys are provided in the kit as barrel shaped wood pieces,which I made slings for with some .6mm black rope. They don`t look the best,but they were difficult to hold & get all the ropes tied on. Mark pirozzi, piratepete007, NMBROOK and 6 others 9 Quote current build - HMS Vanguard - Model Shipways Link to comment Share on other sites More sharing options...
Greg the peg leg sailor Posted January 18, 2017 Share #376 Posted January 18, 2017 G'day Mark Great piece of work on the anchors. It's a good idea of using heat shrink for the metal. I did an experiment on a piece of wood with heat shrink around it , oh about 18 months ago and put it on the window sill. Just looked at it and so far just like new if you blow away the dust (it's my garage window). It gets direct sunlight for half the day. So far so good. Havagooday my friend Greg Quote "Nothing is impossible, it's only what limitations that you put on yourself make it seems impossible! " Current log : The Royal Yacht Royal Caroline 1749 1:32 by Greg Ashwood:... Link to comment Share on other sites More sharing options...
marktiedens Posted January 18, 2017 Author Share #377 Posted January 18, 2017 Thanks Greg - I got the heat shrink idea from someone else on the forum,but I don`t remember where I saw it,so thanks to that person for the idea. i`ve used a lot of heat shrink on automotive wiring repairs & have never seen it go bad,so it should be just fine for my little ship . Mark Quote current build - HMS Vanguard - Model Shipways Link to comment Share on other sites More sharing options...
Greg the peg leg sailor Posted January 18, 2017 Share #378 Posted January 18, 2017 That's where I saw it. Many thanks to whom originally sent it in. Greg Quote "Nothing is impossible, it's only what limitations that you put on yourself make it seems impossible! " Current log : The Royal Yacht Royal Caroline 1749 1:32 by Greg Ashwood:... Link to comment Share on other sites More sharing options...
BillLib Posted January 18, 2017 Share #379 Posted January 18, 2017 (edited) That might have been me with the heat shrink idea in Kenneth Powell's build log of the Rattlesnake, post #40. http://modelshipworld.com/index.php/topic/3656-rattlesnake-by-kenneth-powell-model-shipways-american-privateer/page-2 I'm also following this build log as well since I'm also building the Royal William. I'm not dedicated enough to do a build log, but I'm following all of these great builds in the forum. He's mine so far. Regards, Bill Edited January 18, 2017 by BillLib Landlubber Mike, fmodajr, marktiedens and 7 others 10 Quote Link to comment Share on other sites More sharing options...
md1400cs Posted January 18, 2017 Share #380 Posted January 18, 2017 I learned this technique from BE's incredible build log for his HMS Pegasus. Though I have not tried it out yet. marktiedens 1 Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa - Link to comment Share on other sites More sharing options...
marktiedens Posted January 18, 2017 Author Share #381 Posted January 18, 2017 Bill,your Royal William looks really nice . Mark Quote current build - HMS Vanguard - Model Shipways Link to comment Share on other sites More sharing options...
piratepete007 Posted January 18, 2017 Share #382 Posted January 18, 2017 We tend to judge the popularity of a kit by the number of different build logs on MSW. How fantastic to see the photos from Bill of his wonderful work on the Royal William shown above even though he has not set up his own build log. I for one would love to see some more of his photos in the future. I suspect we could all learn a few tricks from his obvious depth of expertise. Pete Landlubber Mike, marktiedens and Shipyard sid 3 Quote Link to comment Share on other sites More sharing options...
marktiedens Posted January 20, 2017 Author Share #383 Posted January 20, 2017 Update - moving right along,I added some cat heads to the catheads . Then I added the staghorn cleats to the quarterdeck bulwarks. I am pretty sure the hull is now complete except for the stern lanterns,which will be installed later . Mark md1400cs, WackoWolf, pirozzi and 10 others 13 Quote current build - HMS Vanguard - Model Shipways Link to comment Share on other sites More sharing options...
md1400cs Posted January 20, 2017 Share #384 Posted January 20, 2017 Mark, Those last three views just tell it all - superb work. What a beauty you are creating. marktiedens 1 Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa - Link to comment Share on other sites More sharing options...
Beef Wellington Posted January 20, 2017 Share #385 Posted January 20, 2017 Looking really beautiful Mark, really coming together now. Can't imagine how heavy she must be now... marktiedens 1 Quote Cheers, Jason "Which it will be ready when it is ready!" In the shipyard: HMS Jason (c.1794: Artois Class 38 gun frigate) Queen Anne Royal Barge (c.1700) Finished: HMS Snake (c.1797: Cruizer Class, ship rigged sloop) Link to comment Share on other sites More sharing options...
Greg the peg leg sailor Posted January 21, 2017 Share #386 Posted January 21, 2017 (edited) G'day Mark Firstly I must say, congratulations on this stage being finished! What a beauty she is! And you must be so proud of your achievements thus far. Every stage of your log so far has pushed the envelope and it's a 'benchmark' for all to follow. All I can say is ditto to all the previous entries. Have you weighed her so far? I'm also curious to find out how heavy she is. Havagooday my friend Greg Edited January 21, 2017 by Greg the peg leg sailor Quote "Nothing is impossible, it's only what limitations that you put on yourself make it seems impossible! " Current log : The Royal Yacht Royal Caroline 1749 1:32 by Greg Ashwood:... Link to comment Share on other sites More sharing options...
marktiedens Posted January 21, 2017 Author Share #387 Posted January 21, 2017 Thank you all for your nice comments & likes . As far as weight,all I have is one of those old step-on scales,but it shows about 11 pounds,which is quite heavy for a model this size. After picking it up & moving it around many times,I would say it is at least that heavy. That converts to about 5KG if my conversion chart is right. Mark Quote current build - HMS Vanguard - Model Shipways Link to comment Share on other sites More sharing options...
rshousha Posted January 21, 2017 Share #388 Posted January 21, 2017 Hi all - this will be my attempt at building the Royal William from Euromodel. I say attempt because I consider my skills as just average. In looking at this blog, I was reminded of the first lines you wrote. This sure is quite an "attempt". Well done so far!! marktiedens and pirozzi 2 Quote Rick Shousha Montreal Link to comment Share on other sites More sharing options...
marktiedens Posted January 21, 2017 Author Share #389 Posted January 21, 2017 Thanks Rick - the hinges you provided to me came out pretty good. Mark Quote current build - HMS Vanguard - Model Shipways Link to comment Share on other sites More sharing options...
piratepete007 Posted January 21, 2017 Share #390 Posted January 21, 2017 Maybe time for a small pause in this fantastic construction - however, I doubt whether you will take that pause Mark. I agree with Greg that this is indeed a phenomenal benchmark for a completed hull of the Royal William. Not for anyone to follow necessarily in its absolute detail but Mark has shown what could be done and I would like to think that others that are in the process of building their own Royal William will be inspired to 'carve out' their own presentation. There is so much freedom within this Euromodel build to create an individualistic approach. This ship is becoming a beauty to behold (to coin a phrase). Congratulations Mark. Pete Landlubber Mike and marktiedens 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.