leginseel Posted July 12, 2017 Share #121 Posted July 12, 2017 Superb work and I love the idea to use the small spirit levels, I'll be taking that one on board. Quote Cheers Nigel Current Build - HMS Victory, Caldercraft - scale 1:64, started September 2021 Cutty Sark, Constructo - scale 1:115, finished August 2021 HMS Bounty, Constructo - Scale 1:50 - First wooden kit build, finished April 2019 Link to comment Share on other sites More sharing options...
Robert29 Posted August 3, 2017 Author Share #122 Posted August 3, 2017 (edited) Thank you for the likes and thank you for your nice comment Nigel. Upper gun deck planking ready. Since I had to remove quite a bit from the lower edge of the inner bulwark pattern to align the gunports I have also added a strip of basswood all around the upper edge of the inner bulwark pattern to bring it to the right level and to avoid any problems in planking its sides. As for the treenails I was not sure if to do them or not. I decided to do them. I think the deck looks better with them. I just marked a dot lightly with a pencil after the first varnish coat. Next step is the planking of the inner bulwark pattern Robert Edited August 3, 2017 by Bertu Kevin, BenD, leginseel and 8 others 11 Quote Current Build HMS Victory 1805 - Caldercraft - 1:72 Previous Build Bluenose II - Artesania Latina - 1:75 Completed Builds Juan Sebastian Elcano - 1:205 Bluenose II by bertu - Artesania Latina - 1:75 Link to comment Share on other sites More sharing options...
Kevin Posted August 3, 2017 Share #123 Posted August 3, 2017 Lovely to catch up on your build, must look at mine again soon Old Collingwood 1 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - On hold MHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024 Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat Link to comment Share on other sites More sharing options...
Robert29 Posted August 13, 2017 Author Share #124 Posted August 13, 2017 (edited) Thank you for the likes and thank you Kevin for your comment. Looking forward for your Victory updates. Your work is lovely. A small update: I finished the planking on the top gun deck inner bulwark, still needs sanding. I painted the first lower plank before fixing so that I have a clean cut line from the deck. Started work on the outer gunport pattern planking. Planned how many planks go in and what tapering and bending they need. Width for individual planks calculated and marked on the patterns. In the coming days hopefully I will start the planking and continue with the wales. Robert Edited August 14, 2017 by Bertu BenD, coxswain, Old Collingwood and 5 others 8 Quote Current Build HMS Victory 1805 - Caldercraft - 1:72 Previous Build Bluenose II - Artesania Latina - 1:75 Completed Builds Juan Sebastian Elcano - 1:205 Bluenose II by bertu - Artesania Latina - 1:75 Link to comment Share on other sites More sharing options...
Charter33 Posted August 13, 2017 Share #125 Posted August 13, 2017 Beautifully crisp and accurate craftsmanship as always, Robert. A genuine source of inspiration! Keep up the good work - a pleasure to follow the progress you are making. Graham mort stoll and John Allen 2 Quote Link to comment Share on other sites More sharing options...
Robert29 Posted September 17, 2017 Author Share #126 Posted September 17, 2017 Thank you Graham. Another update, moving slowly. Wales all finished and gunport linings for the upper gun deck finished as well. Next step is the gunport linings for for the lower and middle gun decks. I have a feeling it is not going to be easy at all. When I finish the linings I will fill the space between the planks in the lower part of the hull and finish. For the upper gun deck linings, the walnut strips (1mm x 16mm) supplied with the kit was impossible to use. The thickness which was supposed to be 1mm was under 0.8mm and apart from that it was very brittle. More often than not, it kept splitting in two while trying to trim to size. Had to order some new ones with the right thickness. Worked out fine. Regrads Robert Heinz6672, John Allen, Tim Curtis and 9 others 11 1 Quote Current Build HMS Victory 1805 - Caldercraft - 1:72 Previous Build Bluenose II - Artesania Latina - 1:75 Completed Builds Juan Sebastian Elcano - 1:205 Bluenose II by bertu - Artesania Latina - 1:75 Link to comment Share on other sites More sharing options...
Heinz6672 Posted September 20, 2017 Share #127 Posted September 20, 2017 Hello Robert! Congratulation to you for your beautiful work! Always pleasure to follow your progress! Keep it on! :-) -Heinz- md1400cs, John Allen and mort stoll 3 Quote HMS Victory by Heinz746 Link to comment Share on other sites More sharing options...
DonnRW Posted September 21, 2017 Share #128 Posted September 21, 2017 Robert, You are doing a beautiful job on the Victory! Thank you for sharing your craftsmanship through your posts, I am enjoying watching the ship take shape. I noticed that you have installed the windows on the galleries; did the window materials come supplied in the kit, or did you use something else? Thank you, Donn md1400cs 1 Quote Link to comment Share on other sites More sharing options...
Robert29 Posted September 23, 2017 Author Share #129 Posted September 23, 2017 (edited) Thank you Heinz, and thank you for the likes. Donn, thank you for your comment, much appreciated. The material I used for the quarter gallery is all the once supplied with the kit. I can't really complain for the wood supplied with the kit. Up to now the only strips I had to change was the walnut 1mm x 16 mm which is used to line the gunports. It's thickness was 0.8mm instead of 1mm and very brittle. It kept splitting in two easily whist trying to trim it down to size. But otherwise the rest was very good. Robert Edited September 23, 2017 by Bertu Quote Current Build HMS Victory 1805 - Caldercraft - 1:72 Previous Build Bluenose II - Artesania Latina - 1:75 Completed Builds Juan Sebastian Elcano - 1:205 Bluenose II by bertu - Artesania Latina - 1:75 Link to comment Share on other sites More sharing options...
DonnRW Posted September 23, 2017 Share #130 Posted September 23, 2017 Robert, thank you for your response. On rereading my question I realize that I was not clear as to the information I was seeking, I apologize. I should have asked, about material used to mimic the window "glass". Was that material supplied in the kit, or did you use something else? Thank you Robert, you are doing a splendid job! Quote Link to comment Share on other sites More sharing options...
Robert29 Posted September 23, 2017 Author Share #131 Posted September 23, 2017 Ah, sorry Donn, I haven't fitted the glass yet. In the instructions manual it tells you to stick a piece of transparent plastic (cut from a sheet supplied with the kit) on the inside of the gallery, but I didn't like the idea as this was going to leave a gap between the plastic and the brass window frame. I intended to cut a piece of plastic exactly the size of the brass window and fix it in the indent on the gallery skin. I know this is going to create another problem for me as now with the extra thickness of the plastic the brass frame is going to protrude further out from the gallery quarter gallery skin, and this is not going to look good. I think I will find a thinner plastic sheet and maybe deepen a bit more the indent on the gallery skin. If it comes to the worst I think I would have to cover the gallery skin with some thin planking to gain that extra bit. This problem is only on the side gallery as the stern is different, it has two fascias and the plastic is sandwiched in between. I have to do some thinking how I am going to finish it. If I am not clear please let me know and I will try to explain better. Robert Quote Current Build HMS Victory 1805 - Caldercraft - 1:72 Previous Build Bluenose II - Artesania Latina - 1:75 Completed Builds Juan Sebastian Elcano - 1:205 Bluenose II by bertu - Artesania Latina - 1:75 Link to comment Share on other sites More sharing options...
DonnRW Posted September 24, 2017 Share #132 Posted September 24, 2017 Robert, thank you! Based on your recent pictures, I thought you had installed the glass, but after a closer look I can see that I was fooled by lighting and old eyes. That said, whatever you decided to do relative to "glass" installation, I am sure it will look great. I am enjoying your building log, thank you for taking the time to share it with the model shipbuilding community. John Allen and Robert29 2 Quote Link to comment Share on other sites More sharing options...
Richardjjs Posted October 31, 2017 Share #133 Posted October 31, 2017 On 03/08/2017 at 1:49 PM, Bertu said: Thank you for the likes and thank you for your nice comment Nigel. Upper gun deck planking ready. Since I had to remove quite a bit from the lower edge of the inner bulwark pattern to align the gunports I have also added a strip of basswood all around the upper edge of the inner bulwark pattern to bring it to the right level and to avoid any problems in planking its sides. As for the treenails I was not sure if to do them or not. I decided to do them. I think the deck looks better with them. I just marked a dot lightly with a pencil after the first varnish coat. Next step is the planking of the inner bulwark pattern Robert p leginseel, kier, md1400cs and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Richardjjs Posted October 31, 2017 Share #134 Posted October 31, 2017 Please Please Please get your joggling correct You have done a superb job of planking the deck and tree nails BUT It should be joggled 4 apart NOT 2 You should get away with the gun deck but Not Quarter Forecastle or Poop Again if you are going to mark the tree nails at least make sure each plank end is accompanied with the corresponding treenails next to each other Nearly all model instructions get this wrong and its a bad error that is easily done properly Quote Link to comment Share on other sites More sharing options...
Richardjjs Posted October 31, 2017 Share #135 Posted October 31, 2017 On 21/09/2017 at 1:58 AM, DonnRW said: Robert, You are doing a beautiful job on the Victory! Thank you for sharing your craftsmanship through your posts, I am enjoying watching the ship take shape. I noticed that you have installed the windows on the galleries; did the window materials come supplied in the kit, or did you use something else? Thank you, Donn Quote Link to comment Share on other sites More sharing options...
Richardjjs Posted October 31, 2017 Share #136 Posted October 31, 2017 Clear plastic for windows comes with the kit The kit does include everything Plans are amongt the best I have seen You will need a decent plan of the bow as instructions for EXACT fixing of Wakes are not good I have post a copy of the old Victory Plans from Mantua somewhere Quote Link to comment Share on other sites More sharing options...
Robert29 Posted November 2, 2017 Author Share #137 Posted November 2, 2017 Richardjjs Thank you for your comments and thank you for your information, but to be honest I cannot understand what you mean when you are referring to the deck planking and say ‘BUT it should be joggled 4 apart NOT 2’. The planks on my model are laid in a four butt system, the end edge of each neighbouring plank is offset by 1/5 of twice the length of the planks. Four planks separate the plank ends where they meet edge to edge. Isn't that what you mean by ' 4 not 2'. Am I missing something? Also you stated ‘Again if you are going to mark the tree nails at least make sure each plank end is accompanied with the corresponding treenails next to each other’. What is the difference from what I did on my model to what you are saying? Again, am I missing something? Richardjjs, I would appreciate if you clarify this for me, or maybe another member of the forum who has more knowledge and know how than me on this subject enlighten me if the four butt system is the correct one for the HMS Victory, and if so, are my deck planks laid in the correct way? This is an image of the HMS Victory deck planking. On my model I only marked the treenails on the edge of each plank as I thought that if I mark the once in between as well it was going to be too much. Rich (Archicar), I hope you don’t mind, I borrowed this image from your great set of photos you took and placed in your log. If you do mind I will remove it. They are great pictures and found them very helpful. Thanks. Robert Charter33, Rich.F, Retired guy and 1 other 4 Quote Current Build HMS Victory 1805 - Caldercraft - 1:72 Previous Build Bluenose II - Artesania Latina - 1:75 Completed Builds Juan Sebastian Elcano - 1:205 Bluenose II by bertu - Artesania Latina - 1:75 Link to comment Share on other sites More sharing options...
Rich.F Posted November 2, 2017 Share #138 Posted November 2, 2017 Bertu, Your build is coming along great, Love the wood work so fare will be a shame if your going to paint it..... Robert. LOL That's Not a problem help your self. everything is to be shared. Robert29 1 Quote Rich. Builds in Progress: HMS Victory Completed Builds: Constucto Enterprise Future Builds 2021/2022 USS Constitution Link to comment Share on other sites More sharing options...
leginseel Posted November 3, 2017 Share #139 Posted November 3, 2017 Hi Robert, I personally thought that the comments re joggling were a bit harsh. Model building is a hobby for enjoyment and such suggestions could be said a little more sympathetically as we are not all perfect. kier, MartinB, John Allen and 1 other 4 Quote Cheers Nigel Current Build - HMS Victory, Caldercraft - scale 1:64, started September 2021 Cutty Sark, Constructo - scale 1:115, finished August 2021 HMS Bounty, Constructo - Scale 1:50 - First wooden kit build, finished April 2019 Link to comment Share on other sites More sharing options...
Richardjjs Posted November 3, 2017 Share #140 Posted November 3, 2017 Really sorry about this didn't explain myself properly (or carefully) One thing that winds me up is when people make superb jobs of their build and get basic things wrong. In this case I was WRONG!! Its often difficult to explain what you mean I build a Panart 1:78 Victory about 40 years and a San Felipe about 20 years ago (have enclosed some pictures) and was very impressed by the quality of the wood - in particular the solid wood fittings like the gun carriages. So did not paint either model As you may know the fittings like the gun carriages are walnut ply on the Caldercraft so I decided to paint the model. Quite frankly its the worse thing I ever did as much of the detail is now hidden. (it also hides up a few errors which I am not happy with) I have joggled my deck but not as well as Bertu's and have been advised by Caldercraft against treenails as the model is not big enough. (if you look at the actual Picture of the Victory the treenail are hardly visible as the are the same wood as the decking Strictly speaking the treenails should run across the planking at every deck beam but that's a bit of over kill Sorry for the misunderstanding But I did congratulate Bertu on his incredible work Seriously thinking of starting the San Felipe as I am not happy with my Victory (Certainly need to clean it up a bit as Ive not worked on it in a year!!) Obviously Victory is no where near as far built as my SFelipe Robert29 and leginseel 2 Quote Link to comment Share on other sites More sharing options...
Richardjjs Posted November 3, 2017 Share #141 Posted November 3, 2017 Looking at Bertu's decking. The treenails really make the deck come alive so I think I will look at doing my Victory. Presume you used a pencil. I will run mine across the deck to see what it looks like Robert29 and leginseel 2 Quote Link to comment Share on other sites More sharing options...
Richardjjs Posted November 3, 2017 Share #142 Posted November 3, 2017 Hoping this shows up OK. Will look much better in reality as I did this in Paint Of course the hatch comings need adding before the tre nails are added at the end of the planks. (really not happy with my Victory!!) md1400cs, zappto, John Allen and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Richardjjs Posted November 3, 2017 Share #143 Posted November 3, 2017 On 21/05/2016 at 9:01 PM, Bertu said: Thank you Bob. You are right about the counter pattern in fact while wetting and bending it ply sheets had already started to come apart . I had to insert glue at the edges and clamp it. Robert Have suggested to Caldercraft that they cut this part at 90 degrees so its easier to bend airdataman 1 Quote Link to comment Share on other sites More sharing options...
paulb Posted November 7, 2017 Share #144 Posted November 7, 2017 Just to add a small comment about tree nails: this is how Zu Mondfeld in Historic Ship Models describes tree nailing. Most model builder ignore the tree nails, except the ones at the end of every plank. (I must admit I ignored those as well ). It all depends on what you think has the better looks. mcpwilk 1 Quote Regards, Paul Link to comment Share on other sites More sharing options...
Richardjjs Posted November 7, 2017 Share #145 Posted November 7, 2017 I remember that's where I got the information from Historic Ship Modelling. Its how I did my Victory many years ago I do think that Tree nails make the deck come alive BUT if you look at an earlier post of the actual picture Victory Tree nails you can hardly see them because the whole decking has been Holystoned over many Centuries. Would have been interesting to see how it looked when built and 50 years later in Nelson' time Interesting information Thanks Quote Link to comment Share on other sites More sharing options...
Richardjjs Posted November 7, 2017 Share #146 Posted November 7, 2017 Victory's Guns On board ship cannons become Guns (Apparently) There are three main ways to rig the guns with tackle In the Instructions the Guns are secured with roved tackle ie lashed round with the Main tackle being well secured. Strictly speaking the Barrel should also be lashed up to the ship's side. And the main tackle Lashed However I believe that should the gun be run out it would not be roved as this would prevent the gun being used. The short tackle from the gun to the ship's side would be short and a further tack with 2 double blocks would be at full extent. The main tackle would be loose the allow the gun to recoil As the gun was fired the rear tackle would be tightened to allow the gun to be reloaded. FINALLY. All references to the side tackle show a single block at the Gun and a double block at the ships side - Seems like Caldercraft got it wrong here Has anybody any ideas about mongraming the Barrels. Will add photos as I proceed Robert29 1 Quote Link to comment Share on other sites More sharing options...
md1400cs Posted November 7, 2017 Share #147 Posted November 7, 2017 Robert, Just came across your Victory! Awesome work indeed. Your level of details with wood are as good as it gets. Really like the lights - especially with warm Kelvin outputs - perfect. Glad to be at your shipyard looking in and learning. Regards, Richardjjs and Robert29 2 Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa - Link to comment Share on other sites More sharing options...
mort stoll Posted November 8, 2017 Share #148 Posted November 8, 2017 check siren ship models site. they sell monograms. used them on my Diana. worked out very well. mort Richardjjs 1 Quote Current Build - Caldercraft Victory Completed - Artesiana Latina Swift, Harvey, MGS Prince de Neufchatel, Imai USS Susquehanna, Mamoli Constitution, Rattlesnake per Hunt Practium, Caldercraft Snake, Diana, Kammerlander Duke William Waiting to be Launched - Bluejacket Constitution Proud member of The New Jersey Ship Model Society Link to comment Share on other sites More sharing options...
Robert29 Posted November 9, 2017 Author Share #149 Posted November 9, 2017 Nigel, Richard, thank you for your comments. Paul, thank you for the information on the treenails. I ignored the treenails in between as I was afraid the deck was going to look too crowded. It is a question that still lingers in my mind if I should have included them!!! Michael, thank you for your nice comment, I try my best. You are most welcome on my shipyard and if you have any suggestions for my build I would be more than glad to hear them. Mort, thank you for your information, much appreciated. The monograms look great. I guess the 3/32’’ should be ok for the 1:72 scale cannons. I will try them. It will be a nice detail. Now for another small update. Just finished the gunport linings. A lot of patience was needed. This is the jig I used to fit them. Very crude but very helpful. Got the idea from similar jigs on other builds. I must admit I got a lot of ideas and learned a lot from this great forum. Robert Retired guy, Heinz6672, leginseel and 2 others 5 Quote Current Build HMS Victory 1805 - Caldercraft - 1:72 Previous Build Bluenose II - Artesania Latina - 1:75 Completed Builds Juan Sebastian Elcano - 1:205 Bluenose II by bertu - Artesania Latina - 1:75 Link to comment Share on other sites More sharing options...
Richardjjs Posted November 9, 2017 Share #150 Posted November 9, 2017 Your wood work is so much tidier and neater than mine Are you using Caldercraft's wood Think if you are going to add treenails they should be correct ie at least across the plank ends (Not sure about over the deck beams this might be too much Again look at that actual picture of Victory the tree nails hardly shoe Often its a matter of what looks right In Anatomy of Nelson's Ships Longridge talks about lifting the fore copper slightly higher as it looks right GREAT WORK leginseel and md1400cs 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.