rvchima Posted March 16, 2022 #181 Posted March 16, 2022 Harry, The guns look just fine to me. They are parallel to the deck and to each other. When everything is painted they will look perfect. Rod mtaylor, Canute and Old Collingwood 3 Quote Rod Current Build - HMS Sphinx, 20 Gun Frigate from 1775 Previous Builds Bismarck, WWII German Battleship, Prinz Eugen, WWII German Heavy Cruiser (Aeronaut), U-Boat 47 (Amati), HM Bark Endeavour (Caldercraft), US Brig Syren (MS), Arno XI Ferrari Hydroplane (Amati), Osberg Viking Ship (Billings), Anteo Harbour Tug (Panart), Marie Felling Harbour Tug (Caldercraft), Arleigh-Burke guided missile destroyer (Bluejacket) Seguin, Steam Tug from 1884, Mississippi Steamboat Robert E. Lee (Amati)
hof00 Posted March 17, 2022 Author #182 Posted March 17, 2022 14 hours ago, rvchima said: Harry, The guns look just fine to me. They are parallel to the deck and to each other. When everything is painted they will look perfect. Rod Thanks Rod, Moving on with the build.... 🙂 Location of parts over multiple "Issues" takes time and careful consideration. (Final Turret components.) Not a rapid build at all.... Never mind, it's not a race either.... 🙂 Cheers and Regards, Harry. Canute, Old Collingwood, BobG and 1 other 4 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
hof00 Posted March 20, 2022 Author #183 Posted March 20, 2022 Hi All, Update: Completed Main and Secondary Turrets and Guns. Lots of masking and tiny bits of PE for the Secondary Turrets. The only problem was dropping a small plastic Periscope for one of the Mains. I searched for a ages but to no avail. Made a replacement from a bit of sprue, not perfect but they are so small that I don't think anyone will notice. I think that the Mains could do with a bit of a "Tickle" where the wooden circular bases have a "Step." I'll give all Turrets some Semi Gloss to protect. To round off the day, I'll finish constructing the Forward Mast and have a play with the Boats.... 🙂 Cheers....HOF. Photos: yvesvidal, rvchima, mtaylor and 4 others 7 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
Old Collingwood Posted March 24, 2022 #184 Posted March 24, 2022 Looking really nice. OC. Canute and mtaylor 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
hof00 Posted March 24, 2022 Author #185 Posted March 24, 2022 4 hours ago, Old Collingwood said: Looking really nice. OC. Thank you Sir.... I think it's getting somewhere slowly. Cheers....HOF. mtaylor and Old Collingwood 2 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
hof00 Posted March 24, 2022 Author #186 Posted March 24, 2022 (edited) Hi All, Bit of an update, HOF has been working on Ships Boats.... 🙂 So, seven of the eleven are now what I'm going to call complete. Two Dinghy's and two Longboats were easiest until I decided to re-paint the internals with Vallejo "Wood Grain" A very careful removal of the PE was a heart in mouth time.... The Motorboat was next being the smallest, tiny PE but a good learning.... Two Launches, quite complex but I got through o.k. (The Bow PE piece did not want to play nicely at all so I made my own from Brass Wire for both Launches.) All propellers were a pain to fit onto thier Shafts, in the end, I opened up the hole in the center of the Prop, it made things so much simpler. The Boats look a little untidy, (In my mind.), up close but look much better viewed "Normally" if that makes sense. (My hat is very firmly off to those that build 1/700 scale!! 🙂) I now have the four "Service" Boats to complete and I guess on to Forward Superstructure PE. (Unless I go down another Part-work rabbit hole!!) Cheers....HOF. Photos: Edited March 24, 2022 by hof00 keelhauled, king derelict, RGL and 6 others 9 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
hof00 Posted March 26, 2022 Author #187 Posted March 26, 2022 Hi All, Small update: HOF has been playing with Boats again.... 🙂 Spent the day finishing the four Service Boats. These went together o.k., not too much PE, just enough to keep me honest!! As I mentioned to Rod, (rvchima), these won't be mounted on the Ship for some time yet but good to have them complete. (It's another 4 magazine "Issues" out of the way.) Eleven Ships Boats total count. I think tomorrow, I'll deal with a partly consumed PE fret containing components for the Funnel Searchlight Platforms and a coupe of Ventilators that will get mounted on the main Hanger.... Cheers....HOF. Photos: king derelict, RGL, robdurant and 8 others 11 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
hof00 Posted March 29, 2022 Author #188 Posted March 29, 2022 (edited) Hi All, Small update: I have fallen into a bit of a "Part-Works" Rabbit Hole.... Not too bad though.... Got through two further "Issues" but took me a couple of days. Constructed and installed a couple of Ventilators, Port/Starboard by the Main Hanger Doors. (Why this could not have been a molding, we'll never know.) Constructed and installed Searchlight Platforms Port/Starboard funnel, (11 PE pieces each) Platform,), and installed Searchlight Covers. I am now left with a complete PE Fret that covers the previous two "Issues" that deal with the Admirals Bridge and associated Conning Tower. I am pretty sure that I'll get this out of the way before Sheathing the Forward Superstructure. I'll post some photos after the Conning Tower PE is attended to. Cheers....HOF. Edited March 29, 2022 by hof00 Canute, mtaylor and Old Collingwood 3 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
hof00 Posted April 2, 2022 Author #189 Posted April 2, 2022 Hi All, Small update: I'm about 1/2 way through installing the PE sub-structures on the Conning Tower, more tiny bits to go.... Admirals Bridge Platform and Railings complete and given a bit of paint as this will be covered. That's about the size of it for the morning. 🙂 Cheers.... HOF. Photos: CDW, Canute, Old Collingwood and 8 others 8 3 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
hof00 Posted April 3, 2022 Author #190 Posted April 3, 2022 Forgot to mention, I'll have to develop someting to hold the Conning Tower.... The more PE that gets added and the more "Protrusions" the easier that it is to accidentally knock something off!! (Been there, done that.... 😀) I'm thinking of a blob of "Blutack" on the plastic base onto a small block of wood.... Cheers....HOF. mtaylor, Canute and Old Collingwood 3 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
rvchima Posted April 6, 2022 #191 Posted April 6, 2022 Those supports on the side of the funnel are really hard. Congrats on completing that bit. Rod mtaylor, Old Collingwood and Canute 3 Quote Rod Current Build - HMS Sphinx, 20 Gun Frigate from 1775 Previous Builds Bismarck, WWII German Battleship, Prinz Eugen, WWII German Heavy Cruiser (Aeronaut), U-Boat 47 (Amati), HM Bark Endeavour (Caldercraft), US Brig Syren (MS), Arno XI Ferrari Hydroplane (Amati), Osberg Viking Ship (Billings), Anteo Harbour Tug (Panart), Marie Felling Harbour Tug (Caldercraft), Arleigh-Burke guided missile destroyer (Bluejacket) Seguin, Steam Tug from 1884, Mississippi Steamboat Robert E. Lee (Amati)
hof00 Posted April 6, 2022 Author #192 Posted April 6, 2022 19 hours ago, rvchima said: Those supports on the side of the funnel are really hard. Congrats on completing that bit. Rod Thanks Chap, They are not prefect but they will do. I agree, they were a ral pain.. I am finding that the PE for the Conning Tower is more of a challenge.... I should be able to complete this step today, (Hopefully), but not all of it as this is the method that Partworks use, they "jump around...." If I try and complete fully, I'm going to have yet more bits to "Put aside." I found the Hanger Boat instructions in the next installment,, (119), and, the Jig.... We'll see how that goes....🙂 (As you found, it looks like I'll have to move the Ladders on the Hanger.) Cheers....HOF. Ryland Craze, Canute, Old Collingwood and 2 others 5 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
Old Collingwood Posted April 7, 2022 #193 Posted April 7, 2022 Keep at it doing really well. OC. mtaylor and Canute 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
hof00 Posted April 7, 2022 Author #194 Posted April 7, 2022 6 hours ago, Old Collingwood said: Keep at it doing really well. OC. Thank you Sir.... keelhauled, Canute, mtaylor and 1 other 4 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
hof00 Posted April 8, 2022 Author #195 Posted April 8, 2022 (edited) Hi All, Small update: PE now complete on the lower Conning Tower. (Don't know why the instruction call this a "Mast.") When I say complete, I left 4 pieces off, Webs under the Central PE Platform, no biggie, no one will notice or look for that matter. I managed to break the RHS Rear Platform Railing, so made a replacement from 0.5mm Brass Wire, as with both Rear Platform outer Rails, I got fed up with trying to balance these on the Platform edge waiting for the CA to set-up and after loosing one to the "Carpet Monster" I decided to make my own. Don't know what the Rectangular protrusions are on the Rear Platforms but the instructions call for them to "Articulate" and they do....🙂 The whole structure in "The Raw" looks really scrappy but I think that a judicial application of Acetone and dose of Light Grey will make things a whole lot better and hide the misdemeanors.. (I'll do that tomorrow morning.) I found this structure really "Fiddly" and did not assist with my usually calm countenance. 🙂 (It's also reasonably fragile, so care necessary when handling.) Cheers....HOF. Photos: Edited April 8, 2022 by hof00 robdurant, mtaylor, Old Collingwood and 3 others 6 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
hof00 Posted April 9, 2022 Author #196 Posted April 9, 2022 (edited) Hi All, Cleaned up and gave the Conning Tower and gave it a dose of Primer. Not perfect but better than it was.... 🙂 (It is what it is.... Just noticed in one of the photos the top PE ring on the Starboard side needs a "Tweak.") I can now move on with another "Issue." I think that I'll have a go at the Hanger Boat supports and see how that goes.... Amati/Partworks supplied a bit of strip wood to construct a Jig for these. Cheers....HOF. Sorry to plague you with Conning Tower photos.... Edited April 9, 2022 by hof00 yvesvidal, Canute, Old Collingwood and 3 others 6 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
hof00 Posted April 9, 2022 Author #197 Posted April 9, 2022 I need to stop "Stressing!!" I placed the Conning Tower structure on the Forward Superstructure. Once done, any tiny errors disappear with the sheer size of the Ship.... 🙂 I guess I'm being over critical and striving for perfection. I have to remind myself that this project is also my first serious foray in the use of Photo Etch. HOF. mtaylor, Old Collingwood, BobG and 3 others 6 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
hof00 Posted April 11, 2022 Author #198 Posted April 11, 2022 Hi All, Small update: Decided to assemble the "Service Boat" storage racks that will be positioned either side of the Main Hanger. (The other two Service Boats are accommodated on the Hanger Roof.) I assembled the Jig last night and used some candle wax on the surfaces of the Jig that would be exposed to CA. The Jig worked o.k. in terms of correct spacings but required a small clamp to prevent things moving around. (Even though I have not yet fitted the Racks yet, I'm reasonably confident they'll fit with ought too many issues.) Cheers....HOF. Photos: keelhauled, BobG, mtaylor and 5 others 8 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
BobG Posted April 11, 2022 #199 Posted April 11, 2022 That's some fine work on very small, storage racks, Harry! Canute, hof00, mtaylor and 1 other 4 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
rvchima Posted April 11, 2022 #200 Posted April 11, 2022 First of all, I love the photos with all of the PE pieces laying around on the black background. It looks like you took a fire cracker to your model like we all did when we were kids. On 4/8/2022 at 3:41 AM, hof00 said: Don't know what the Rectangular protrusions are on the Rear Platforms but the instructions call for them to "Articulate" and they do....🙂 Second, I don't know what those things are either, but they are a pain to deal with and just hang off into space on the finished tower. You could consider just gluing them down. Finally, your jig for the lifeboat racks is brilliant! I wish that you had gone first so I could copy. Now be careful not to bump those flimsy rails. Canute, mtaylor, hof00 and 1 other 4 Quote Rod Current Build - HMS Sphinx, 20 Gun Frigate from 1775 Previous Builds Bismarck, WWII German Battleship, Prinz Eugen, WWII German Heavy Cruiser (Aeronaut), U-Boat 47 (Amati), HM Bark Endeavour (Caldercraft), US Brig Syren (MS), Arno XI Ferrari Hydroplane (Amati), Osberg Viking Ship (Billings), Anteo Harbour Tug (Panart), Marie Felling Harbour Tug (Caldercraft), Arleigh-Burke guided missile destroyer (Bluejacket) Seguin, Steam Tug from 1884, Mississippi Steamboat Robert E. Lee (Amati)
hof00 Posted April 11, 2022 Author #201 Posted April 11, 2022 57 minutes ago, BobG said: That's some fine work on very small, storage racks, Harry! Thanks Chap. The reason that I bothered to post this was that the Amati kit does not seem to provide a Jig for this particular element but the Amati/Partwork version does. So, in order for those attempting the Amati Version, they may wish to construct the Jig. Cheers and Regards, Harry. mtaylor, BobG, Old Collingwood and 2 others 5 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
hof00 Posted April 11, 2022 Author #202 Posted April 11, 2022 14 minutes ago, rvchima said: First of all, I love the photos with all of the PE pieces laying around on the black background. It looks like you took a fire cracker to your model like we all did when we were kids. Second, I don't know what those things are either, but they are a pain to deal with and just hang off into space on the finished tower. You could consider just gluing them down. Finally, your jig for the lifeboat racks is brilliant! I wish that you had gone first so I could copy. Now be careful not to bump those flimsy rails. Thanks Rod, I will try to ensure that I don't make any sudden movements around the Rails!! Before I install, I need to ensure that the Superstructure is prepared as much as possible.... Cheers and Regards, Harry. BobG, Old Collingwood, robdurant and 2 others 5 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
rvchima Posted April 13, 2022 #203 Posted April 13, 2022 On 4/11/2022 at 7:24 PM, hof00 said: The reason that I bothered to post this was that the Amati kit does not seem to provide a Jig for this particular element but the Amati/Partwork version does. So, in order for those attempting the Amati Version, they may wish to construct the Jig. Very interesting! It's too late for me but it might help someone else if you could post a drawing for the jig. Canute, mtaylor and Old Collingwood 3 Quote Rod Current Build - HMS Sphinx, 20 Gun Frigate from 1775 Previous Builds Bismarck, WWII German Battleship, Prinz Eugen, WWII German Heavy Cruiser (Aeronaut), U-Boat 47 (Amati), HM Bark Endeavour (Caldercraft), US Brig Syren (MS), Arno XI Ferrari Hydroplane (Amati), Osberg Viking Ship (Billings), Anteo Harbour Tug (Panart), Marie Felling Harbour Tug (Caldercraft), Arleigh-Burke guided missile destroyer (Bluejacket) Seguin, Steam Tug from 1884, Mississippi Steamboat Robert E. Lee (Amati)
hof00 Posted April 20, 2022 Author #204 Posted April 20, 2022 Hi All, Small update: So, progress has been a little slow, due in no small part, to battling the COVID thing.... ☹️ I climbed back into it today and made a start on the forward Superstructure. (Jumping back many issues.... After clearing the Decks and placing sub-assemblies into secure storage to mitigate any accidents....) The exposed Decks, (No Printed Deck covering), I gave a dose of Sanding Sealer as I want to minimize any grain showing through post painting these areas. (I extended this to the Aft superstructure "Painted" deck areas as well.) Up until now, I had not attached the Fore Superstructure Decks, (1st Tier), I am pleased that I did so as the aft structure was slightly "Racked" but pulled into alignment with lots of clamps.... I guess when I sheath this stuff it will show any issues, I hope not!! About six "Issues" should see the Brass sheathing more or less completed. So, onward.... I'll post some photos in the next few days. Cheers....HOF. mtaylor and Canute 2 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
Old Collingwood Posted April 20, 2022 #205 Posted April 20, 2022 1 hour ago, hof00 said: Hi All, Small update: So, progress has been a little slow, due in no small part, to battling the COVID thing.... ☹️ I climbed back into it today and made a start on the forward Superstructure. (Jumping back many issues.... After clearing the Decks and placing sub-assemblies into secure storage to mitigate any accidents....) The exposed Decks, (No Printed Deck covering), I gave a dose of Sanding Sealer as I want to minimize any grain showing through post painting these areas. (I extended this to the Aft superstructure "Painted" deck areas as well.) Up until now, I had not attached the Fore Superstructure Decks, (1st Tier), I am pleased that I did so as the aft structure was slightly "Racked" but pulled into alignment with lots of clamps.... I guess when I sheath this stuff it will show any issues, I hope not!! About six "Issues" should see the Brass sheathing more or less completed. So, onward.... I'll post some photos in the next few days. Cheers....HOF. Sorry to hear you have been rough with the (thing) all the best plenty of vits is the key. OC. hof00, mtaylor and Canute 3 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
hof00 Posted April 20, 2022 Author #206 Posted April 20, 2022 4 hours ago, Old Collingwood said: Sorry to hear you have been rough with the (thing) all the best plenty of vits is the key. OC. Thanks you Sir!! Good to be back at the workbench, great for the mind, body and soul....🙂 Cheers and Regards, Harry. Old Collingwood, mtaylor and Canute 3 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
BobG Posted April 20, 2022 #207 Posted April 20, 2022 13 hours ago, hof00 said: battling the COVID thing. I'm sorry to hear this, Harry. I hope you're on the road to recovery. hof00, Canute, mtaylor and 1 other 4 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
hof00 Posted April 20, 2022 Author #208 Posted April 20, 2022 3 hours ago, BobG said: I'm sorry to hear this, Harry. I hope you're on the road to recovery. Thanks Chap!! All good thanks, performed a RAT Tuesday - Now negative.... 🙂 Cheers and Regards, Harry. BobG, Canute and Old Collingwood 3 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
keelhauled Posted April 21, 2022 #209 Posted April 21, 2022 Wow! what a build. very impressive - and it looks very small and fiddley. Sorry to hear about your illness! I hope that your well soon! I wish you the best my friend. You're an inspiration! cheers Marc hof00, mtaylor and Canute 3 Quote Currently building the Cutty Sark http://modelshipworld.com/index.php?/topic/1000-cutty-sark-by-keelhauled-mantua-kit-bashed-first-wooden-ship-build/
hof00 Posted April 21, 2022 Author #210 Posted April 21, 2022 1 hour ago, keelhauled said: Wow! what a build. very impressive - and it looks very small and fiddley. Sorry to hear about your illness! I hope that your well soon! I wish you the best my friend. You're an inspiration! cheers Marc Thanks Chap, It's my first model ship with "Guns.... 🙂" As mentioned somewhere near the start of the log, I spent so much "Coin," NZD $16.95 per issue X 140 issues), years ago, seeing other Bismarck builds here, It piqued my interest in this, time to carry on with it. Yup, it is "Fiddly" very.... However, I needed to learn more, esp. Photo Etch. (It's not that small at around 1.4 meters but the PE and other aspects tends to be at 1/200.) A bit of a departure from models with "No Plastic" bits, (Multi-Media) I think it'll come out o.k. in the end. The 'Sickness" has thankfully run its' course..... 🙂 Cheers and Regards, Harry. keelhauled, mtaylor and Canute 3 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.