Kevin Posted December 11, 2021 Share #61 Posted December 11, 2021 what a difference a coat of primer does hof00, mtaylor, Canute and 1 other 4 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - On hold MHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024 Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat Link to comment Share on other sites More sharing options...
hof00 Posted December 12, 2021 Author Share #62 Posted December 12, 2021 6 hours ago, rvchima said: Harry, Somehow I missed your build log. I haven't looked too far ahead in the instructions so it was interesting to see your work on the turrets. I will be following along. Rod Thanks Chap, Much appreciated!! Yup, when you get a mo, (Or, when you are a little further along with your Bismarck), I'd be very interested to know if your Decks are "Flush", (Or otherwise), with the False Deck. Cheers and Regards, Harry. Canute, mtaylor and popeye the sailor 3 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted December 12, 2021 Author Share #63 Posted December 12, 2021 6 hours ago, Kevin said: what a difference a coat of primer does Thanks Kevin, Yup, finishing the Hull with a bit of paint certainly gives one a bit of satisfaction, relief? 🙂 With pervious Wooden ships, they all seem to have a "Look like S...t stage." I have learnt to just push on and not get too disheartened. 🙂 Cheers....HOF. mtaylor, BobG, popeye the sailor and 1 other 4 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted December 12, 2021 Author Share #64 Posted December 12, 2021 Hi All, Thanks for the likes and comments, appreciated. Small update: Filled filling/snding and re-primed the Hull. Decided to skip to issue to #126, Hull Porthole Rivet thingies. Commenced to instal using Mig Ammo Ultra Glue so that I could easily remove and re-seat if necessary. the portholes need a really good "Push" to grt them seated properly. (Flush) The installation went very well until my 2.0mm drill bit snapped inside the Stern resin piece. One hole on the Port Stern holes was way out of line. I could not retrieve the drill bit nor did I re-drill the one Port Hole but filled then.... (A bit lazy but no one will know apart from me and anyone that reads this.... 🙂 (I really don't want to re-prime the Hull again!!) Completed the wooden structures for Port and Starboard Hangers. I won't prime these unyil some of the etch goes on but may do a bit of sanding sealer as the slots for the PE I feel would be too easily "Lost." Almost forgot the Sea Chest PE!! 🙂 There are, I think 13 or 14 components per side. I guess I'll work on these next and I'll have to ensure the locations for these fit the PE after the spray putty/primer went on. Cheers....HOF. Photos: mtaylor, BobG, gjdale and 5 others 8 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
Old Collingwood Posted December 12, 2021 Share #65 Posted December 12, 2021 I use this for any wood work or scenery and even attaching wood veneer decking - Gorilla Wood Glue | Water Resistant PVA Strong Fast Bond Non Foaming Adhesive OC. Canute, hof00, mtaylor and 1 other 4 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
hof00 Posted December 12, 2021 Author Share #66 Posted December 12, 2021 Thanks OC, I'll have a look at that. Cheers....HOF. Canute, Old Collingwood, popeye the sailor and 1 other 4 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted December 12, 2021 Author Share #67 Posted December 12, 2021 Hi All, Final update for today.... Port side Sea Chest and other inlet PE attached. I had to very carefully clean out the locations small chisels and the odd second hand dentist tool.... 🙂 I think I'll stop for the day and carry on with the Starboard side tomorrow. Cheers....HOF. Photos: Canute, mtaylor, GrandpaPhil and 7 others 10 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted December 13, 2021 Author Share #68 Posted December 13, 2021 (edited) Hi All, Small update: Installed Starboard side Sea-Chest stuff. this went allot more smoothly than the Port side.... Installed Prop Shaft shrouds/fairings and prepared the rest of this structure. Paper Templates locate the shrouds/fairings. Jumping ahead a few issues but not to worry too much. Instructions advise using epoxy for this, I had other ideas. Keyed up the Hull where the shrouds/fairings are mounted, CA and "Pinned" with four 1.2mm Brass rods each side. They need a small bit of filler around the edges but they're not going anywhere!! (Very firmly affixed 🙂) The shaft triangular supports are not yet affixed, a bit of fiddling to get this correct first. So, that was today's little effort anyway. Tasks for the next few days: Finish Prop Shaft structures Aft Hull Grab Rails (Maybe) Continue with aft Superstructure PE sides Cheers....HOF. Photos: Edited December 13, 2021 by hof00 Canute, mtaylor, yvesvidal and 5 others 8 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
BobG Posted December 13, 2021 Share #69 Posted December 13, 2021 Nice work, Harry. It looks very good! popeye the sailor, mtaylor, Old Collingwood and 1 other 4 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
hof00 Posted December 14, 2021 Author Share #70 Posted December 14, 2021 (edited) Thanks Bob. Hi All, Small update: Not too much activity in the Ship Room" today, I'm a bit knackered/stuffed. 🙂 Managed to get a nice fillet around the Prop Shaft shrouds. (If that's what they're called.) Been studying PDF's in terms of what is coming up. I have pretty much decided to add the two Starboard side Stern Portholes that I had omitted. (I guess I'm a little fussy at times. 🙂) So, I won't add the Stern Grab Rails as yet but will continue with the Aft Superstructure PE sides. (It will be good to have them installed one day soonish. (PE still fills with a certain amount of dread at this time but I guess like anything else it will become the norm.) I took some photos that I will share of progress thus far with components just placed, helps to give me a bit more enthusiasm also. As Clark Gabel said in Gone With The Wind, "Tomorrows another day!!" Cheers....HOF. Photos: Edited December 14, 2021 by hof00 rvchima, yvesvidal, gjdale and 8 others 11 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted December 16, 2021 Author Share #71 Posted December 16, 2021 (edited) Hi All, No update as such, just a continuation working on the aft superstructure PE sides and associated hatches, grilles, etc. (I am also leaving the completed PE structures on thier respective "Frets" until it's time to attach them.) ]\12 I do however, have a question, How do I remove an unwanted build-up of CA off PE? My PE skills seem to be improving but on one of the first PE sides that I attempted, I had trouble attaching "Scuttles" to the main PE piece. It probably wouldn't be visible but I need to get the excess off. Do I use something like Thinners? (I don't have any "De-bonder") I have tries carefully scraping to no avail.😗 Any advice would be most welcome.... Cheers....HOF. Edited December 16, 2021 by hof00 popeye the sailor, Canute, mtaylor and 1 other 4 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
BobG Posted December 16, 2021 Share #72 Posted December 16, 2021 Hi Harry, I have used CA debonder but I believe that acetone and nail polish remover work also. Good luck! mikegr, hof00, Old Collingwood and 3 others 6 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
hof00 Posted December 16, 2021 Author Share #73 Posted December 16, 2021 (edited) Thanks Chap!! I'll get some nail polish remover tomorrow and give it a go....🙂 Cheers....HOF. Edited December 16, 2021 by hof00 popeye the sailor, mtaylor, Canute and 3 others 6 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
BobG Posted December 16, 2021 Share #74 Posted December 16, 2021 Maybe try a little test area first to make sure it works and doesn't stain or cause you other problems. Canute, Old Collingwood, Ryland Craze and 2 others 5 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
hof00 Posted December 16, 2021 Author Share #75 Posted December 16, 2021 2 hours ago, BobG said: Maybe try a little test area first to make sure it works and doesn't stain or cause you other problems. Thanks Chap, A good idea, thanks for reminding me to test first! Cheers....HOF. mtaylor, popeye the sailor, Old Collingwood and 2 others 5 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted December 18, 2021 Author Share #76 Posted December 18, 2021 (edited) Hi All, Small update: Still working on the Aft Superstructure PE and have more to go before I can complete.... I have enough completed to clad the Bottom Superstructure tier but have more tasks to complete before I can contemplate installing this. (It would be nice but then I'd be rushing.) Completed some other PE for cladding the second tier also, quite complex and took a few hours of work. I do however think that, I'm getting a little better at PE. (For positioning open Scuttles, etc, I have started to use a tiny dot of Blue-Tack to hold the part in position, dot with CA and let the capillary thing happen.... 🙂 PE waiting for my attentions, probably tomorrow: More Superstructure cladding Catapults (There's some "Tempting" PE Frets including cladding for Barbette "Caesar." 🙂) Tasks that are required before attaching PE: Position cladding Draw Port Hole locations Remove cladding and drill Port Holes Clamp Printed Decking to Superstructure Sand edges of Decking flush with Superstructure sides Remove Printed Decking Install PE cladding Clear as mud? So, I think my tasks tomorrow I'll start with more PE, (I feel that I am punishing myself a bit but I need to get a better handle on the vagaries of this medium.), then get the Decking flush. So, that's me for today anyway.... Cheers....HOF. A couple of photos: Edited December 18, 2021 by hof00 mtaylor, popeye the sailor, yvesvidal and 5 others 8 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
Old Collingwood Posted December 18, 2021 Share #77 Posted December 18, 2021 Lovely work - wish my PE was that Huge. OC. hof00, CaptnBirdseye, popeye the sailor and 3 others 4 1 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
hof00 Posted December 18, 2021 Author Share #78 Posted December 18, 2021 Thank you Sir!! I can see and handle most of it with fingers.... 🙂 Nothing as tiny as your 1/700 models. Cheers....HOF. BobG, Old Collingwood, mtaylor and 2 others 5 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted December 20, 2021 Author Share #79 Posted December 20, 2021 Hi All, Very small update: Been working on the first Catapult.... I started this last night but the structure collapsed.... !! 😗 (Not enough CA in the joints.) Had another go at it today and made a very rudimentary jig for aligning top and sides, a simple piece of Walnut the correct width. 4.5mm X 3.0mm and rubbed with Candle wax to that it would come out cleanly. Cleaned up the PE pieces and started again.... This time it worked out o.k. A couple of very "Fiddly" pieces on the base almost had me giving up for the day.... A very important note seems to have been omitted, from my instructions anyway.... The second Catapult needs to be a "Mirror" image of the first!! I'll hopefully get some photos tomorrow and I'm hoping the second Catapult won't take as long as the first.... 🙂 Cheers....HOF. mtaylor, CaptnBirdseye, Old Collingwood and 3 others 6 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted December 21, 2021 Author Share #80 Posted December 21, 2021 (edited) Hi All, Another very small update: Still working on the Catapults.... Noticed with the second that looking from the top, there is a definite pattern of the lattice structure that I didn't have with the first.... The second structure looks' like XiXiXiXi, correct. The first looked like VIViVi, incorrect. 😗 Decided to pull the first Catapult apart and try to fix by flipping the top PE over. So, I eventually got this done after a bit of fiddling.... (I was very concerned about the possibility of breakage .) (I hate re-work but I am not expert with PE.) I will hopefully complete both Catapults today, I'll then get some photos uploaded. The second Catapult is a "Mirror" image. 🙂 Cheers....HOF. Edited December 23, 2021 by hof00 BobG, JeffT, Old Collingwood and 3 others 6 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted December 23, 2021 Author Share #81 Posted December 23, 2021 (edited) Hi All, Completed both Catapults.... Finally.... 🙂 I wasn't sure that I'd be able to complete these but perseverance paid off. (I'm sure there will be many more "Challenges" coming up.😗) The Catapults comprise of 13 separate pieces each, 14 including the wheel axle. (Unsure if the Trumpeter version has a folded Catapult structure, I must have a look.) Unsure of the time taken but it doesn't really matter, and, if I keep making the same excuse that I'm a PE novice, I'm sure you'll understand. The first Catapult to me 2.5 attempts at getting it reasonably o.k. The second only took maybe three hours and one attempt to complete. (Always the way....) I can now move on getting more aft Superstructure sides prepared, Hatches, Doors, Scuttles attached, and a nice big piece of PE for cladding Barbette "Cesar." 🙂 (Once I give myself a bit of a break.) Cheers....HOF. Photos: (Sorry, no "Macro" lens.) Edited December 23, 2021 by hof00 gjdale, BobG, popeye the sailor and 4 others 5 2 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
macfelsing Posted December 23, 2021 Share #82 Posted December 23, 2021 Hello HOF, Amazing work on the Bismarck. I am currently working on the Trumpeter Kit 1/200 with the PONTOS basic and advanced PE sets plus several veteran model resin and PE kits for various rang finders, some of the gun turrets. Getting a lot out of your build journey on this one. I have the Bismarck project posted on Scalemates.com and will be uploading pictures soon. Even though the kits are different media I am learning a lot from your build, comments and pictures. Thanks for sharing your journey! mtaylor, Canute and popeye the sailor 3 Quote Link to comment Share on other sites More sharing options...
hof00 Posted December 23, 2021 Author Share #83 Posted December 23, 2021 (edited) 3 hours ago, macfelsing said: Hello HOF, Amazing work on the Bismarck. I am currently working on the Trumpeter Kit 1/200 with the PONTOS basic and advanced PE sets plus several veteran model resin and PE kits for various rang finders, some of the gun turrets. Getting a lot out of your build journey on this one. I have the Bismarck project posted on Scalemates.com and will be uploading pictures soon. Even though the kits are different media I am learning a lot from your build, comments and pictures. Thanks for sharing your journey! Hi Chap, I started this in 2008 I think and never got past a partially complete Hull. Thought it was time to complete.... I too have the Trumpeter version with the MK1 detail set and may have a look at this after this one is done.... (I also have a Tamiya 1/350 version.... 😗) More than happy to share the journey!! Great if my build log is assisting your project. 🙂 Cheers....HOF. Edited December 23, 2021 by hof00 Canute, popeye the sailor and BobG 3 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted December 26, 2021 Author Share #84 Posted December 26, 2021 Hi All, Bit of an update.... Working on more Aft Superstructure cladding, lots of doors, scuttles and wind shield thingies. I feel that I can shortly start to assemble this PE and fix it to the Aft Superstructure, finally!! 🙂 There is one more "largish" piece of PE for the uppermost Superstructure tier. (t's one piece formed around the uppermost tier itself.) This will have to go on fairly early in the piece to prevent fouling the second tier rails, etc. Also been working on Barbette "Caesar" cladding. This was not too much of an issue but, the cladding needed to be shortened by approx. 1.5mm.... Central Aft Hanger PE assembled and installed, Hagar affixed to uppermost Superstructure tier. (Note: Superstructure tiers are not glued to each other as yet, this comes some way down the track.) Before I complete the Superstructure PE, I need to form the AA sighting towers, ladders, doors and railings. I also have to clad a rear gunnery control thingy. Hope you are all having a great Christmas!! 🙂 Cheers....HOF. Photos: mtaylor, Old Collingwood, gjdale and 6 others 7 2 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
BobG Posted December 26, 2021 Share #85 Posted December 26, 2021 Very nice work, Harry! popeye the sailor, Canute, CDW and 3 others 6 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
hof00 Posted December 26, 2021 Author Share #86 Posted December 26, 2021 Thanks Chap, It seems to be getting somewhere.... 🙂 Cheers....HOF. Old Collingwood, CDW, popeye the sailor and 3 others 6 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted December 27, 2021 Author Share #87 Posted December 27, 2021 (edited) Hi All, Small update.... Completed Aft Gunnery Control Thingy and Anti Aircraft Gunnery stations. I am finding out more about PE and had to form Railings for the first time. (Not too bad with 1.5 arms.... 😗) Not particularly happy about the joint where the Railings meet to form a circle, They are o.k. but will have a think about improvements, perhaps.... It may be better to leave well alone. Looking at sizing, (Ensuring Deck edges are flush with Superstructure sides), the 1st tier Superstructure Decking. I think this will be tomorrow. I might even get some PE sides attached!! 🙂 Thank you for all the "Likes!!" Cheers....HOF. Photos: Edited December 27, 2021 by hof00 GrandpaPhil, mikegr, BobG and 6 others 9 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
Old Collingwood Posted December 27, 2021 Share #88 Posted December 27, 2021 Mods - quick question - why do some of theses longer posts not auto locate to the latest posting - Often I have to manulay scroll down to get to it. OC. mtaylor, popeye the sailor, hof00 and 1 other 4 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Canute Posted December 27, 2021 Share #89 Posted December 27, 2021 I've had similar issues with clicking on the star. Should take me to just after my last entry/view. Sometimes it does (usually), but sometimes it just geets me to the page. mtaylor, popeye the sailor, Old Collingwood and 1 other 4 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
mtaylor Posted December 27, 2021 Share #90 Posted December 27, 2021 16 hours ago, Old Collingwood said: Mods - quick question - why do some of theses longer posts not auto locate to the latest posting - Often I have to manulay scroll down to get to it. OC. I have no idea OC. Could a hiccup with the browser, the server or any number of things. I think these are technically called "gremlins". LOL. hof00, popeye the sailor and Canute 3 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.