marsalv Posted October 28 Author #61 Posted October 28 Thank you albert. I started planking the hull under wales. But I soon found out that in order to finish gluing the planks in the stern area, it is necessary to glue the planks on the stern first. rybakov, dvm27, cotrecerf and 18 others 20 1 Quote
albert Posted October 29 #62 Posted October 29 Beautiful work Marsalv. mtaylor, No Idea and Keith Black 3 Quote
marsalv Posted November 15 Author #63 Posted November 15 I'm continuing with planking, it's going very slowly - so far I have about two-fifths of the hull done, including nailing. And although I was as careful as possible when manipulating the hull, I managed to break off part of the stem. Fortunately, it is only in the glued joint, so the repair will not be difficult. KentM, druxey, Archi and 16 others 16 3 Quote
druxey Posted Friday at 01:02 PM #64 Posted Friday at 01:02 PM Beautiful and clean work, marsalv. I usually delay attaching the knee of the head until after planking and work on the external hull is complete, to prevent it breaking off. Also, it is not in the way when planking the bow. Keith Black, Baker, mtaylor and 1 other 4 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
EspenT Posted Friday at 02:47 PM #65 Posted Friday at 02:47 PM Fantastic and inspirational. Regarding CNC: are digital files included in the monograph, or do you scan the paper copies? Keith Black and mtaylor 2 Quote Current build: HM Armed Cutter Sherbourne
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.