Shelby Cobra Coupe by DocRob - Model Factory Hiro - 1/12 - multi-media - Le Mans

[DocRob]

After an intense masking madness session, to protect the interior, I started with the body color. I fear, there will be color lifts with the interior, despite cleaning the resin properly, thorough priming and airbrushing, but this needs to be addressed later. It´s also one of the reasons, why I didn´t mount some of the ready painted inner fairings, before painting the body.
A Kind Of Blue from Miles Davis was my soundtrack for the paintjob 
I used Number Five´s Cobra Blue as the main color. Other than with classic plastic kits, I had not to fear reactions with the resin and could coat a bit more liberal. I airbrushed three medium coats with a drying time of about 20 minutes in between. Number Five colors are ready to spray, but I added about a third of leveling thinner after some testing.
They spray very fine and even, with extremely fine metallic grain and dry semi matte and fast.
At first, I thought, coverage would be not too good, as the black overspray shined through the first coat, but after some minutes, the paint leveled and became more opaque.
Besides the horribile smell, (I always wear a respirator) I absolutely love my first experience with Number Five colors. Besides, I used only one 30ml jar of color for the big Cobra, which is great to my eye.
After checking, I found some tiny dots on the bonnet and will lay on a fourth coat tomorrow.







Cheers Rob

[Jack12477]

24 minutes ago, DocRob said:

Kind Of Blue from Miles Davis was my soundtrack for the paintjob 

One of my favorite albums. His drummer, Jimmy Cobb, maintained a residence here in the valley and was often seen performing here.  On one occasion closed all the streets in the Village of Saugerties for a Jazz in Saugerties weekend, Jimmy was center stage in the middle of the major intersection in the village. 

 

Beautiful shade of blue on the Cobra. 

[king derelict]

A great color choice and beautifully applied. This is going to be stunning.

Alan

[CDW]

A beautiful color, the paint looks super!

[DocRob]

4 hours ago, Jack12477 said:

One of my favorite albums. His drummer, Jimmy Cobb, maintained a residence here in the valley and was often seen performing here.  On one occasion closed all the streets in the Village of Saugerties for a Jazz in Saugerties weekend, Jimmy was center stage in the middle of the major intersection in the village. 

 

Beautiful shade of blue on the Cobra. 

That is an interesting story, Jack. I have seen Miles Davis live with his later stuff in 1985 in Berlin. I liked the concert, but prefer earlier recordings. My favorite is the soundtrack of Elevator to the Gallows and I do like the movie as well. Another hobby of mine is collecting and foremost hearing vinyl records on my very decent turntable via a good amp and quality speakers. I have several Miles Davies albums, but my interest is wide spread from classic to punk, with some bias on jazz and world music, but never boring charts stuff.
 

2 hours ago, king derelict said:

A great color choice and beautifully applied. This is going to be stunning.

 

1 hour ago, CDW said:

A beautiful color, the paint looks super!

Muchas gracias Alan and Craig, the blue metallic paint is a strange one. It changes it´s looks dramatically with different lightings. My good camera, which I normally use for modelling pics, was not able to render it correct, equal, which parameters I altered. I had to use my IPhone, which did a slightly better job. So much about the objectivity of photography .

Cheers Rob

[Canute]

Rob, nicely done finish. The paint looks like it lays down nice and smooth. The color looks great.

[DocRob]

1 hour ago, Canute said:

Rob, nicely done finish. The paint looks like it lays down nice and smooth. The color looks great.

The paint indeed layed down beautifully and very smooth. Best thing is the extremely fine metallic pigment. I don´t like the un scale glitter look of many metallic paints.
The color looks always different, even to the human eye. That way, there is not a lot of possibility to question historic adequacy .

Cheers Rob

[DocRob]

Time for some glosssss. I used Zero Paints lacquer clear gloss with about 40% leveling thinner added. Came out pretty decent and should be good enough for decaling. The very high gloss is difficult to capture on the photos.
Before, I applied a fourth coat of Cobra Blue overall, to let the tiny blemishes on the bonnet disappear.
Unfortunately, during photographing, I tried to hinder my cat, jumping onto the model, it hit a stone and I have another small mark in my paintjob .





Cheers Rob

[DocRob]

I hesitated starting with the decaling, because something was nagging me. I didn´t like the oversprayed part of the body, where I dented the paintjob. Tiny marks were still visible and imperfections tend to sum up, specially with high shine car bodies. I wet sanded the area carefully and then resprayed again. And now, I felt, I´m ready for decaling.
There is no makers branding on the decal sheet, but the decals were of perfect quality. They are glossy, very opaque, not at all brittle and easy to apply, which made the not so easy task a lot more comfortable. I aligned the stripes more by eyesight, than measuring. The decals are overlapping the borders on the ends and where cutouts are and with perfect placement and some scalpel corner cuts, you wrap the decals around the bonnet and body edges, which of course looks better in the end. Until now, I used only lukewarm water with a drop of detergent for application and the decals behaved perfect, contouring around the edges by themselves after a while of drying. Today, I will evaluate some critical areas and may use some decaling fluids there.

And now the Cobra got it´s stripes 





Cheers Rob
 

[yvesvidal]

Amazing and beautiful work, Rob. That blue is fantastic.

 

Yves

[CDW]

10 minutes ago, yvesvidal said:

Amazing and beautiful work, Rob. That blue is fantastic.

 

Yves

Totally agree. Stunning body work.

[DocRob]

1 hour ago, yvesvidal said:

Amazing and beautiful work, Rob. That blue is fantastic.

 

1 hour ago, CDW said:

Totally agree. Stunning body work.

Thank you Yves and Craig, to be honest, the blue is the interpretation of my camera. Whatever setting I change, it just doesn´t show it correct or maybe the camera is right and my eyes are off . The color has a slight petrol tint, not that pure blue like on the pics. It nevertheless looks beautiful.
Today, I checked the decalwork and added a few drops of Micro Sol here and there.

Cheers Rob

[Canute]

Sweet finish. Turning out great.

[DocRob]

Have you ever had that modelling moment, where you wanted to rewind time for a minute? I had one today.
After checking, if all the decals settled perfectly, I cleaned the body with soapy water, to get rid of any residues from the decaling phase. Then, I applied a first coat of Zero Paint clear gloss, with maybe 20% added leveling thinner. The first layer is only misted, to seal the decals in and due to rapid drying time (relatively high air pressure and low thinning ratio) reduce the risk of harming the decals with hot liquids.
After about an hour, I applied the second layer of clear, this time more liberal with about a third of leveling thinner  and after another hour, I applied the (planned) last layer thinned with ca. 50% of leveling thinner and sprayed on wet. So far so good, until, I took out the airbrush out of it´s holder, to blow the body color dry a bit and didn´t notice that some goo was on the front of the airbrush casing, which squirted onto my just finalized paintjob .
Now, I´m really frustrated, as everything went well since days of prep work, until the final seconds. I was about to bin the kit instantly, as I absolutely hate these kind of mishaps. I usually prepare my work thoroughly, trying to think ahead of everything, but when something goes seriously wrong, I´m impatient, restless and uncompromising.
I´m not sure what to do, leaving it as is or waiting (again) for the clear to dry completely and then carefully try to sand the dots away and re-clear, risking of ruining everything or finally binning the kit.

Here are the pics, it looks not too bad, but it is not acceptable. The orange peel look is due to the lighting of some hundred LED´s, the paintjob itself is near perfect and will be perfect after polishing. The dots on the roof´s stripes are the worst, but there are some more.





Cheers Rob

[king derelict]

That is so frustrating after such precise work creating a beautiful model. It’s one thing to reach the limit of your skills but another to have something random happen to the model. My commiserations. It’s so beautiful.

Alan

[gsdpic]

Oh man, that is sad to see.  I think I’d let the clear dry then try to carefully sand off the blobs then do another coat or two of clear.  Good luck with whatever you try; we have faith that you’ll overcome this challenge.

 

If you get to the point of binning the kit, don’t do that, send it to me 😎.  Just kidding I am sure you can recover from this.

 

[DocRob]

22 hours ago, king derelict said:

That is so frustrating after such precise work creating a beautiful model. It’s one thing to reach the limit of your skills but another to have something random happen to the model. My commiserations. It’s so beautiful.

Thank you Alan. Random accidents happen and it was clearly my fault, not checking the airbrush. That´s the other frustrating thing about it,  I hate to make mistakes and prepare everything properly, to not let something like this happen.
I worked for more than a month on body preparation, airbrushing, decaling and clear coating and had hoped to finish this stage yesterday.
I did the at least to me very difficult thing and leaned back. Today, I jumped into the Atlantic and crawled hard for two kilometers, to let some steam off and maybe tomorrow, I will look for solutions.

Cheers Rob

[DocRob]

14 hours ago, gsdpic said:

Oh man, that is sad to see.  I think I’d let the clear dry then try to carefully sand off the blobs then do another coat or two of clear.  Good luck with whatever you try; we have faith that you’ll overcome this challenge.

 

If you get to the point of binning the kit, don’t do that, send it to me 😎.  Just kidding I am sure you can recover from this.

You wouldn´t like it with the splatter blobs, Gary . They are not huge, but they disrupt the look completely, somehow. Tomorrow, I will try to wet sand these blobs away with very fine grained sanding sponges.

The last possibility would be a tactical one. If I can´t alter the situation, I need a good story. How about a barn find   .

Cheers Rob

[gsdpic]

36 minutes ago, DocRob said:

The last possibility would be a tactical one. If I can´t alter the situation, I need a good story. How about a barn find   .

 

Or you could add lots of splatters of oil and blobs of rubber as if it just finished a long race.

[DocRob]

Phew, I think, I have saved the Cobra from binning for now. After carefully sanding the splatter dots. first with 1500 grit, then 4000, 6000 and finally 8000 grit, there was one culprit left, the most visible unfortunately. I carefully dotted heavily thinned Tamiya LP-2 gloss white with a fine brush into the tiny crevice, building up the spot, until the color looked right. After drying the same sanding treatment like the others. 
After all was wiped clean, I applied two coats of Zero Paints lacquer gloss with about 50% of added leveling thinner and an hour of drying time in between.
I think, I have a 95% solution achieved and later, when everything is properly cured, I will sand very carefully and polish until it´s an absolute high shine finish.





Cheers Rob

[king derelict]

Great recovery Rob. Congratulations 

Alan

[DocRob]

18 hours ago, king derelict said:

Great recovery Rob. Congratulations 

Thank you Alan, I have to admit, the whole painting and finishing process with car bodies is relatively new to me and I´m really nervous with each stage. As a security blanket, I have a tiny sprue of 1/32 bombs, where I apply exactly the same colors and decals step by step as a dummy for testing effects of colors, get a feeling, how hot they are, if it´s better to apply light or wet coats or if they affect decals. The nervousness stays nonetheless as it becomes more and more difficult to repair damages later on. The drop of goo on my airbrush had skipped my attention though.

Cheers Rob

[Javlin]

Stuff like that can **** you off Rob nice save though....perseverance.