Kevin Kenny Posted August 1 #1 Posted August 1 Starting research on building a model of the HMS Ulysses the ship that brought my ancestor Chevalier Michel Julian de Verteuil to Trinidad in 1797 . JacquesCousteau, dafi, AJohnson and 7 others 9 1 Quote
uss frolick Posted August 1 #2 Posted August 1 The wreck of HMS Endymion lies on a reef on the southern Turks Island shoal. In one of the greatest coincidences of maritime history, she sank after striking Endymion Rock ... [Joke. Obviously, the rock was named after her loss.] jpalmer1970, mtaylor and trippwj 1 2 Quote
Kevin Kenny Posted August 3 Author #3 Posted August 3 jpalmer1970, cotrecerf, JeffT and 3 others 6 Quote
Kevin Kenny Posted August 3 Author #4 Posted August 3 The Janus which was renamed Dromedary sank when she hit Parasol rock, but they did not change the name of the rock uss frolick, jpalmer1970 and mtaylor 3 Quote
dvm27 Posted August 4 #5 Posted August 4 Nice video Kevin. I wasn't aware of the Hahn CDs. Perhaps they were put together by Dave Stevens? At any rate you need to consider whether you will rig her or not. David and I are making a model of a similar size ship for a Yacht Club and I can attest that, with rigging, she will barely fit through the doorframe of my workshop. I will need to purchase a lift to rig her! I'm sure your wife is very supportive of your hobby but is she willing to have a room dominated by a ship model and its case of this size? Will she be pleased with the cost of the glazing for this case? If she's to be unrigged her real estate imprint will be much more manageable (hallway). Hahn's 1/8"-1ft scale model of Roebuck is beautiful but I find it harder to work at the smaller 1/8" scale. Besides the vision difficulties it is much harder to make scale fittings at this scale. As well, there are those lovely carvings. Perhaps you should try a couple at this scale to make sure you'll be happy with them? Having built several Hahn style ship models I think you will enjoy the challenge. It's a bit more wasteful with the wood but you seem to have plenty. And there's nothing like the thrill of cutting the model from the jig. Do Hahn's plans have a scale on each frame? I've had no end of problems having plans reproduced at different scales without distortion in the X or Y axises. At any rate you will be busy for the next five years or so with this model! JeffT, mtaylor, scrubbyj427 and 1 other 4 Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752
Kevin Kenny Posted August 5 Author #6 Posted August 5 Hi Greg thanks for the response. There is no way i will be rigging a model of that size. It may be Dave Stevens CD’s i am not home to check it but will do so in a week as i noticed a lot of copywrite notices . I am sure Hahn did not do them, they were supplied when i purchase the plans from the family. It was a while ago and cant remember the details of how i got everything. The most important thing is all the plans are available in CAD. With reference to scale i have a friend who owns a high end copy center. I was pleasantly surprised that he was able to print perfectly scaled up drawings from the CAD drawings supplied in the CD’s. And more importantly he has agreed to do it for me at no cost. Thats always encouraging. I am at the point of just trying to put every thing in place to start the build some time next year when Thorn is complete. And Thorn will be fully rigged. Not sure i will use his jig to make the frames other than to experiment with it. Its the same jig i saw in Rev Remaro practium for the Warrior. Your methods of frame construction have convinced me that this is the preferred method. I am in Tobago for a week but will produce 4 frames when i get back just to get a feel of the width of the finished model. I am almost convinced to build her in 1/4” scale but was interested in hearing of the experience of people who made large models which they kept at home. If it becomes a problem i can always put it in our cottage where i already have a few of my finished models. again thanks for the feedback. kevin dvm27, PaddyO, CiscoH and 2 others 5 Quote
Kevin Kenny Posted August 5 Author #8 Posted August 5 Hi Greg the CD’s may have been done by Bob Hunt, the owner of Lauck Street Shipyard (https://www.lauckstreetshipyard.com). mtaylor and jpalmer1970 2 Quote
jpalmer1970 Posted August 5 #9 Posted August 5 ModelShipBuilder seem to be selling Hahn's plans but I not sure if they come with digital copies of the frames etc. https://www.modelshipbuilder.com/hahnplans.html mtaylor 1 Quote -‐-‐-------------------------------------------------------------------------------------- Current Build Hayling Hoy 1760 - First POF scratch build Completed HMB Endeavour's Longboat by Artesania Latina Completed HM Armed Cutter Alert by Vanguard Models Completed 18ft cutter and 34ft launch by Vanguard Models Completed Pen Duick by Artesania Latina
capnharv2 Posted August 5 #10 Posted August 5 If I recall correctly, Bob started the Roebuck project, then had some problems with the Cad file, and gave it up. I may still have some of that work too. Harvey mtaylor 1 Quote
druxey Posted August 5 #11 Posted August 5 Did you not recieve my two pm's, Kevin? mtaylor 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
scrubbyj427 Posted August 5 #12 Posted August 5 Lovely Subject Kevin! I would go 1/48, the detail is much cleaner and easier to manage. The model won’t be offensively large compared to your Thorn model. mtaylor 1 Quote Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship
bruce d Posted August 5 #13 Posted August 5 Kevin, my two cents worth: The common theme of subjects for your modelling work is telling a worthy story. Having the two vessels in the same scale would be a visual statement serving that story. I'm sure the model will look great whichever scale you choose. scrubbyj427 and mtaylor 2 Quote 🌻 STAY SAFE A model shipwright and an amateur historian are heads & tails of the same coin current builds: HMS Berwick 1775, 1/192 scratchbuild; a Slade 74 in the Navy Board style Mediator sloop, 1/48 - an 18th century transport scratchbuild French longboat - CAF - 1/48, on hold
Pirate adam Posted August 7 #14 Posted August 7 Kevin, It is really neat you have a ship with a tie to your family history. I will offer my two cents on the scale. Years ago I started a model of HMS Alfred using the Harold Hahn plans at 1/8th scale. I did a ton of work on the framing and put it on the shelf after finding myself constantly frustrated with the tiny scale. I also find it just doesn’t have the same “feel” of the 1/4th scale models. I don’t know if I will ever finish it, although I keep it safe. I get so much more satisfaction out of my Washington galley at 1/48. I spent a ton of time thinking about this topic before I started my Crocodile which is just a bit larger than a Swan class. I spent a lot of time looking for pictures of models with people in the pictures for perspective and thinking about where that would fit in the house. Have you considered 1:60 (1/5) scale? It is kind of an unusual scale (not that unusual actually if you look at the National Maritime Museum models), but it is the one used in the Naiad books by Ed Tosti. I read those books constantly, and the parts in the drawings still seem manageable. His build log was super inspiring. It doesn’t quite split the difference between your 2 scales, but would knock off some size. I love following your Thorn. I bet it would love a big brother Adam mtaylor, cotrecerf, dvm27 and 1 other 4 Quote
mtaylor Posted August 9 #16 Posted August 9 On 8/4/2024 at 6:41 PM, Kevin Kenny said: Hi Greg the CD’s may have been done by Bob Hunt, the owner of Lauck Street Shipyard (https://www.lauckstreetshipyard.com). Those are Hunt's plans. I've have yet to see anyone finish one of his designs. To my knowledge there are no CD of Hahn Plan however, there is one source I'm aware offers "legal" Hahn plans.... https://www.modelshipbuilder.com/ I've bought some from him in the past and he's not shady and delivered a good and legal product. By legal..... he's just the middle man between the buyer of the plans and the Hahn family. jpalmer1970 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Kevin Kenny Posted August 17 Author #17 Posted August 17 Made up one of the frames #33 jpalmer1970, mtaylor and Mike Y 3 Quote
druxey Posted August 17 #18 Posted August 17 Interesting. However the frame looks far too 'fat'. Do you have scantlings for a 44-gun ship? mtaylor 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Kevin Kenny Posted August 18 Author #19 Posted August 18 No but its its correct. It looks bigger than it is because of the way Hahn constructs the model. 2” off the top is removed. Mike Y and mtaylor 2 Quote
Kevin Kenny Posted August 18 Author #21 Posted August 18 This is like with like. The smaller frame above was a rejected frame from the Thorn just to give a comparison. This is frame 33 and all the measurement are double the 1/8” scale. The inside drawing is at 1/8 scale. mtaylor and cotrecerf 2 Quote
Kevin Kenny Posted August 18 Author #22 Posted August 18 I have not printed all the scantlings yet . I had to look up scantlings. Humm. I will one day get all these terms under my belt. The larger frame does look double the size of the smaller frame and the measurement are all double. mtaylor 1 Quote
Kevin Kenny Posted November 26 Author #23 Posted November 26 Well you were all correct as I have Judy gotten all the plans at 2/4” scale ancestral frame was over size . So now just trying figure out how to construct the building board. mtaylor 1 Quote
Kevin Kenny Posted November 26 Author #24 Posted November 26 Mounted the frame plan on the building board and will have to get it done again on heavier paper as the full strength PVA glue distorted the paper. I will use a photo paper for the next attempt. davec and mtaylor 2 Quote
Kevin Kenny Posted November 26 Author #25 Posted November 26 The building board is made from high quality MDF instead of high quality plywood which is not available here in Trinidad mtaylor 1 Quote
Kevin Kenny Posted November 26 Author #26 Posted November 26 Sorry built to 1/4” scale CiscoH, cotrecerf and mtaylor 3 Quote
Kevin Kenny Posted December 12 Author #27 Posted December 12 Ryland Craze, Mike Y and mtaylor 3 Quote
Kevin Kenny Posted December 15 Author #28 Posted December 15 Well i have done the 3 frames as promised. So thats it for a while. mtaylor, Mike Y, Ryland Craze and 1 other 4 Quote
Kevin Kenny Posted Friday at 08:50 PM Author #29 Posted Friday at 08:50 PM Building board coming along Ryland Craze, jpalmer1970, vossiewulf and 1 other 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.