HMS Harpy 1796 by Glenn-UK – Vanguard Models - 1:64 scale

[Glenn-UK]

Many thanks @SaltyScot

[Richard44]

4 hours ago, Glenn-UK said:

The failure of the copper plating task did knock my confidence and dented my enthusiasm with this hobby. That said I have now moved on to tasks which I tend to enjoy so my enthusiasm is returning.

Yeh, me too. Been there, done that, put the model aside for a while, then returned ro it later. My first wooden ship model was the AL Endeavour. Back before the Internet, so no help at all. Second planking was turning into a total disaster, so I let it be for a while, then took a deep breath and ripped it all off. Started again.

[Glenn-UK]

A little bit more progress over the last couple of days.

 

I have added the gunwales, timberheads and the sheer rails. I opted to paint the sheer rails flat red. On reflection I wish I had painted the upper rail flat red also rather than black.

 

I have also added the woo and stern side counter timbers.

 

Here is a photo of the hull prior to fitting the stern side counter timbers.

A couple of photos of the bow area.

The next photo shows the woo pattern.

As can be seen in the next two photos now the stern side counter patterns have been fitted, I will need to add a little bit of wood filler to the right hand-hand side and I will need to adjust the bottom edge of the left-hand side so it follows the line of the wale.

 

[Glenn-UK]

A little bit more progress over the last few days.

 

The chess trees have been fitted, one per side.

Next two side fenders per side and the ships steps were added. I should have spent a bit more time cleaning the char for the step edges, so I will need to tidy that up.

Next I attended to the stern area and added the two stern davits.

Various cleats were added to the transom, noting I still need to add the eyebolts around the gun port openings.

To finish of this post I did a bit of work around the bow.

[François de Saint Nazaire]

Thanks, Glenn, for your log with details.

It is very kind of you to share your difficulties

 

Bonne journée/ Have a nice day

[Glenn-UK]

Over the few days I have started work on adding all the deck item. Starting with the stern area I added the rudder housing and rear hatch. I opted to paint the rudder housing and outer framework of the rear hatch black. I used an olive green paint for the rear hatch cover. I have just noted there is some dried glue to remove on the top right side of the rudder housing. I still need to add the eyebolts to the gun port openings.

I then turned my attention to the bow area and added the fore platform assembly which I painted flat red. I also assembled all the Harpy's ladders, 6 off in total. The two ladders for the fore platform have been added.

Next I assembled both the companion hatch and skylight. The companion hatch cover was painted olive green, the basic frame work was painted black and the decorative patterns were painted flat red. The skylight framework was painted black and the window panels were painted flat red. The PE window frames were chemically blackened. In the following photos these assemblies have only placed on the deck and I will glue all the deck items in place once I have completed the assembly phase of all the various deck items. The companion hatch ladder has been fitted however.

I have started to assemble the ship wheel. My current plan is to paint the wooden parts black and the ships wheel (which has been sprayed with a primer) a wood colour. The following photo shows my initial dry fit of the various ship wheel parts. The dowel will need to be trimmed to the required length.

Edited 3 hours ago by Glenn-UK