Jump to content

Recommended Posts

Posted

Started to assemble the parts. Glued the bitt and futtock riders to their places using PVA white glue.



 

For large and more detail photos see also:

http://www.flickr.com/photos/ilhan_gokcay/sets

(Best go into the set and choose slideshow)



 

post-207-0-40578500-1361805380.jpg

post-207-0-54129500-1361805382.jpg

post-207-0-67660400-1361805384.jpg

post-207-0-63907700-1361805386.jpg

post-207-0-97863800-1361805388.jpg

post-207-0-17665600-1361805391.jpg

post-207-0-91853300-1361805392.jpg

Posted

Illhan,

 

as allways, it's really a pleasure to look in your build log and follow your accurate work.

Regards Christian

 

Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36

On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777

Paused: HMS Triton, 1771 - 1/48

"Have no fear of perfection - you'll never reach it." Salvador Dali

  • 2 weeks later...
Posted

Glued the cleats at the bulwarks, knight, pin rail and pump at the main deck.

I do pay much attention to the sequence of these operations in order that nothing will be obstructed later. 

post-207-0-89861000-1362573029.jpg

post-207-0-86960700-1362573031.jpg

post-207-0-12526500-1362573034.jpg

post-207-0-96435700-1362573035.jpg

post-207-0-69088100-1362573037.jpg

post-207-0-53476700-1362573039.jpg

post-207-0-65735300-1362573041.jpg

Posted

Very nice work as usual Ilhan, your woodwork is very precise and clean.  This will make a very nice addition to your collection of excellent models.

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Posted

Installed the deadeyes. I’ve used epoxy glue while glueing to the channels. Fixed the deadeyes in correct angle with rubber bands while the glue sets.

 

For large and more detail photos see also:

http://www.flickr.com/photos/ilhan_gokcay/sets

(Best go into the set and choose slideshow)

post-207-0-87906400-1363337559.jpg

post-207-0-49602400-1363337585.jpg

post-207-0-51195500-1363337588.jpg

post-207-0-56979900-1363337590.jpg

post-207-0-13505700-1363337592.jpg

post-207-0-99153400-1363337593.jpg

post-207-0-19583800-1363337596.jpg

post-207-0-89078500-1363337597.jpg

  • 2 weeks later...
Posted

Little progress. Glued the anchor rope and the deck of the forecastle with white glue (PVA).

 

For large and more detail photos see also:

http://www.flickr.co...han_gokcay/sets

(Best go into the set and choose slideshow)

 

post-207-0-51465400-1364312195.jpg

post-207-0-58712400-1364312197.jpg

post-207-0-59386200-1364312199.jpg

post-207-0-06146200-1364312328.jpg

  • 3 weeks later...
Posted

Ilhan, just catching your build again. Exquisite workmanship clean precise use of wood and other materials enjoyable to watch the progress.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Posted

Absolutely amazing workkkkkkkkkk. Ilhan i really enjoy in this build log and specially in metal work :) You are truly master modeler but absolutely you are top top top in metal work :D

 

Thank you!!!

Past build: BRACERA

 

"Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do... Sail away from the safe harbor. Catch the tradewinds in your sails. Explore. Dream. Discover"

 

KIND REGARDS!

ELMIR

Posted
Posted (edited)

Hey Don, I don't recommend to use the plans form MSB to build a model. There are lots of mistakes which I do not remember all of them right now, but some of them are really serious.

Edited by Ilhan Gokcay
Posted (edited)

I’ve started to build the bulwarks on the fore- and aftercastle. To fix the stanchions at correct angles I’ve built two  casings to guide

the structure and fixed these casings temporarily using the holes for the masts. I’ve cut the stanchions from pear strip and drilled the

ends 0,7 mm (diameter of an ordinary pin). Using the guide casing I’ve marked the positions, drilled the deck, and glued the stanchions with CA.

 

Ilhan Gokcay

 

 

 

________________________________________

For large and more detail photos see also:
http://www.flickr.com/photos/ilhan_gokcay/sets
(Best go into the set and choose slideshow)

post-207-0-77243800-1366034331_thumb.jpg

post-207-0-54531000-1366034338_thumb.jpg

post-207-0-98834200-1366034344_thumb.jpg

post-207-0-35275000-1366034352_thumb.jpg

post-207-0-26128900-1366034358_thumb.jpg

post-207-0-20575200-1366034364_thumb.jpg

post-207-0-23397400-1366034459_thumb.jpg

post-207-0-57468500-1366034477_thumb.jpg

post-207-0-83278000-1366034486_thumb.jpg

post-207-0-46209900-1366034503_thumb.jpg

Edited by Ilhan Gokcay
  • 2 weeks later...
Posted

Going on with the bulwarks. I’ve glued the rail and the upper planking using white glue(PVA) and also got rid off the casings.
 

For large and more detail photos see also:
http://www.flickr.com/photos/ilhan_gokcay/sets
(Best go into the set and choose slideshow)

post-207-0-19135200-1366893320_thumb.jpg

post-207-0-14402000-1366893389_thumb.jpg

post-207-0-21088500-1366893461_thumb.jpg

post-207-0-62125400-1366893467_thumb.jpg

post-207-0-77973200-1366893473_thumb.jpg

post-207-0-41871300-1366893479_thumb.jpg

post-207-0-28947500-1366893485_thumb.jpg

post-207-0-20908000-1366893493_thumb.jpg

post-207-0-69833800-1366893498_thumb.jpg

post-207-0-32891200-1366893505_thumb.jpg

Posted

Hi Ilhan,

 

Always great to see the thought process and care you put into your ship building.  And, thank you for taking the time to repost your builds that were lost.

 

Reg

Posted

Great job, Ilhan.

It's also a great source of inspiration about building techniques and tools for bending.

 

Cheers

Alex

If any of you cry at my funeral, I'll never speak to you again! (Stan Laurel)

Posted

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...