Jump to content

Le Gros Ventre - Gabare du Roi 1776 by cpt. Tom - 1/48 Scale


Recommended Posts

Hello Tom.

Pictures of the construction of your model in the forum of

Gérard Delacroix, France, Marine & Modelisme d' Arsenal

Link:

 

5500.forumactif.org/t671p560-modele-le-gros-ventre-au-1-36-par-gbesson

 

Perfect ship model

 

Regards Karl     :10_1_10:

 

 

 

 

Link to comment
Share on other sites

Sorry that I answer today, I had 4 days late shift and thank you Karl for the link but sadly it starts quite late. The first 1500 and more steps are already done  ;)  ;)

 

Hi Chris, you are invited to watch my first steps and my mistakes.......  :D

 

Tomorrow I have some more pictures for you. Today I have no pleasure anymore, I'm tired like a dog

With best regards

Tom

Current Kit Build Log

The Sovereign of the Seas 1/84

commissioning

HMS Supply

 

Link to comment
Share on other sites

A little progress on the cabare I have to report  :rolleyes:

 

I make the stern timbers but two on the right side are still being made. Sorry I don´t know the English words of these components. The two stern timbers on the left side are not yet glued therefore they are not straight but everything fits well together....!!! Some parts I made 5 ore 6 times until they were correctly  :P  :P

 

Here are the pictures  :D

 

post-4740-0-76819400-1402484839_thumb.jpg

 

post-4740-0-97680800-1402484845_thumb.jpg

 

post-4740-0-12919400-1402484843_thumb.jpg

Edited by cpt. Tom

With best regards

Tom

Current Kit Build Log

The Sovereign of the Seas 1/84

commissioning

HMS Supply

 

Link to comment
Share on other sites

Tom,

 

The transom is shaping up nicely.  I think what you're looking for is "transom timbers". 

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

nice axilliary-tool Tom,

 

I like that solution for clean sanding Frame contours, and its easy to set up...., and the edge is perpindicular to the base board.

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

Hi to all, thank you for your comments and all the "likes" you did....!!

 

Today I build my first Frame (Nr. 63),first I had to do was sawing the frame out, than sanding on my "Sanding table", than sanding with hands and at last I put the tree nails on. The color from the tree nails are too bright, I have to find out what I can change.

 

Here are the pictures:

 

post-4740-0-47012300-1402679938_thumb.jpg

 

post-4740-0-47773300-1402679941_thumb.jpg

 

post-4740-0-57923200-1402679942_thumb.jpg

 

post-4740-0-46347200-1402679944_thumb.jpg

 

post-4740-0-86769500-1402679945_thumb.jpg

 

post-4740-0-78901200-1402679946_thumb.jpg

 

post-4740-0-07171900-1402679948_thumb.jpg

With best regards

Tom

Current Kit Build Log

The Sovereign of the Seas 1/84

commissioning

HMS Supply

 

Link to comment
Share on other sites

Tom I am concerned you may have rounded of the aft edge of your frame which will mean you may have an unsigtly transition to the next frame, in this case the filler timbers below the transom timbers. I think the aft edge of the chamfer should be sharp and to the line indicated on the plan. Cheers. Dick

 

post-848-0-00322500-1402990650_thumb.jpg

Current build: 

 Le Gros Ventre 1:48 POF   http://modelshipworld.com/index.php?/topic/564-le-gros-ventre-by-woodrat-scale-1-48-pof-1767-french-exploration-vessel/

 

Past builds:

Mycenaean War Galley by Woodrat - 1:48 - Shell first Plank on Frame:https://modelshipworld.com/topic/33384-mycenaean-war-galley-by-woodrat-148-shell-first-plank-on-frame

Venetian round ship 14th century by Woodrat fully framed - 1:40 scalCompleted

https://modelshipworld.com/index.php?/topic/17991-venetian-round-ship-14th-century-by-woodrat-fully-framed-140-scale

Venetian Carrack or Cocha 1/64 by woodrat   https://modelshipworld.com/index.php?/topic/4915-venetian-carrack-or-cocha-164-by-woodrat        completed

United States Frigate Essex 1:64 POF   http://modelshipworld.com/index.php?/topic/4496-usf-essex-by-woodrat-scale-1-64-fully-framed-from-takakjian-plans/ - completed 

Yenikapi12 by Woodrat - 1/16 scale - a small Byzantine merchant vessel of the 9th century

https://modelshipworld.com/topic/23815-yenikapi12-by-woodrat-116-scale-a-small-byzantine-merchant-vessel-of-the-9th-century-finished/

The Incredible Hulc by Woodrat - an experimental reconstruction of a mediaeval transport

https://modelshipworld.com/topic/25641-the-elusive-hulc-by-woodrat-finished-a-speculative-reconstruction-of-a-mediaeval-merchantman-132-plank-on-frame/

 

 

 

Location: Perth, Western Australia

 

Link to comment
Share on other sites

Thank you Dick and you are right. I have to made the frame 63 anyway the second time, because yesterday I cut the first "gunport" sorry I don't know the word for this (you can see it on the picture) and made the next mistake........I cutted on the wrong site

 

Here you can see what I mean  :rolleyes:  :rolleyes:

 

post-4740-0-09856600-1402995496_thumb.jpg

 

post-4740-0-96533800-1402995496_thumb.jpg

With best regards

Tom

Current Kit Build Log

The Sovereign of the Seas 1/84

commissioning

HMS Supply

 

Link to comment
Share on other sites

I also made similar mistakes, Tom. It is all part of the journey. Dick

Current build: 

 Le Gros Ventre 1:48 POF   http://modelshipworld.com/index.php?/topic/564-le-gros-ventre-by-woodrat-scale-1-48-pof-1767-french-exploration-vessel/

 

Past builds:

Mycenaean War Galley by Woodrat - 1:48 - Shell first Plank on Frame:https://modelshipworld.com/topic/33384-mycenaean-war-galley-by-woodrat-148-shell-first-plank-on-frame

Venetian round ship 14th century by Woodrat fully framed - 1:40 scalCompleted

https://modelshipworld.com/index.php?/topic/17991-venetian-round-ship-14th-century-by-woodrat-fully-framed-140-scale

Venetian Carrack or Cocha 1/64 by woodrat   https://modelshipworld.com/index.php?/topic/4915-venetian-carrack-or-cocha-164-by-woodrat        completed

United States Frigate Essex 1:64 POF   http://modelshipworld.com/index.php?/topic/4496-usf-essex-by-woodrat-scale-1-64-fully-framed-from-takakjian-plans/ - completed 

Yenikapi12 by Woodrat - 1/16 scale - a small Byzantine merchant vessel of the 9th century

https://modelshipworld.com/topic/23815-yenikapi12-by-woodrat-116-scale-a-small-byzantine-merchant-vessel-of-the-9th-century-finished/

The Incredible Hulc by Woodrat - an experimental reconstruction of a mediaeval transport

https://modelshipworld.com/topic/25641-the-elusive-hulc-by-woodrat-finished-a-speculative-reconstruction-of-a-mediaeval-merchantman-132-plank-on-frame/

 

 

 

Location: Perth, Western Australia

 

Link to comment
Share on other sites

You're so right Dick, with every step you will be better and this is important to me......!! Learn learn learn to make the next steps better  :rolleyes:  :rolleyes:

 

Here some pictures from the sternpart and the the frames are not done yet, will only show me how it goes further. All this is not 1000%, I'm doing this for the first time but I can live with that  :D  :D

 

post-4740-0-37120900-1403167947_thumb.jpg

 

post-4740-0-31805200-1403167948_thumb.jpg

 

post-4740-0-19561100-1403167949_thumb.jpg

 

post-4740-0-85576500-1403167949_thumb.jpg

 

post-4740-0-49555400-1403167950_thumb.jpg

Edited by cpt. Tom

With best regards

Tom

Current Kit Build Log

The Sovereign of the Seas 1/84

commissioning

HMS Supply

 

Link to comment
Share on other sites

  • 3 weeks later...

Hi folks, I'm still alive.....!!!  :D  :D

 

We move at the end of the month in a house and there I have a Shipyard of 20 m²....coooooool  :dancetl6:

For this reason, I have already packed my entire shipyard and this is already in the new house. 

So I do not know when I can continue to build my ships at the moment but I still read here in between in the forum and I am glad when it finally goes further. 

I hope everything goes well and I see you soon again.  :10_1_10:  :10_1_10:

With best regards

Tom

Current Kit Build Log

The Sovereign of the Seas 1/84

commissioning

HMS Supply

 

Link to comment
Share on other sites

Isn't moving fun.  When I made my last move years ago I lost almost all of my photos.  Memorys and models that I built. 

David B

Link to comment
Share on other sites

  • 1 month later...
Link to comment
Share on other sites

Hello and a good Morning to all,

 

I thank you both and yes my workshop now is really big but absolutely awesome. 

No more worries about a dirty guest room  :P  :P and now I can leave everything when guests come  :D  :D

With best regards

Tom

Current Kit Build Log

The Sovereign of the Seas 1/84

commissioning

HMS Supply

 

Link to comment
Share on other sites

  • 2 weeks later...

Hi folks, I'm from the 06. until 26. August in Englewood Florida and maybe someone can give me an address (or more B)​ ) for a good model shop and maybe a few addresses for beautiful sightseeing or something like that.  :cheers:

 

Here it goes again after my vacation......!!!!

Edited by cpt. Tom

With best regards

Tom

Current Kit Build Log

The Sovereign of the Seas 1/84

commissioning

HMS Supply

 

Link to comment
Share on other sites

  • 1 month later...

Hey Guy's I was wondering if you could tell me where to purchase the book the La Gros Ventre besides Acnre fr. I need to aquire this to start this new project. Any help would be much appreciated!

 

Thanks!

Alaska

 

Hi Alaska,

 

I think you're in luck. There are three new copies listed on Amazon for $50 - $55 plus shipping. 

 

Clare

Link to comment
Share on other sites

Thank you so very,very much Clare, purchased it still in the original shrink wrap! I have wanted to aquire this monograph for a long time but the cost has been so very exspensive else where! Your a God send! I so thrilled can't wait to get my eye's and hands on this volume!!

 

Thanks so much again!

 

Alaska

Link to comment
Share on other sites

Glad to help, Alaska.

 

You know, I've been so fortunate to stumble across a couple really great buys here on MSW a moments after Chuck posted them. That's even how I got my copy of Le Gros Ventre. So, I feel like I have this big debt to pay and I'm happy to help where I can.

 

Now, gotta get back to admiring Cpt Tom's build!

 

Clare

Link to comment
Share on other sites

Hello Alaska,

 

sorry I read that just now and Clare is right, sometimes you can get the Book by Ebay.

Well, my vacation is to end and I'm back home. With the Gros Ventre I build her soon further and thank you very much Brian 

Edited by cpt. Tom

With best regards

Tom

Current Kit Build Log

The Sovereign of the Seas 1/84

commissioning

HMS Supply

 

Link to comment
Share on other sites

Hello cpt. Tom! Thanks for the response! Just got my tracking details and it should arrive Friday ,can't wait to see it! I have wanted to purchace this volume for a number of years but money and family abligations have always been in the way but thanks to Clares heads up it will soon be in my hands! I'm greatful for that!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...