Jump to content

KA-6 Australia II (1983) By Pete48 - SMALL 3/16" = 1' - 0 "


Recommended Posts

With the Buzzards Bay 14 & 12 1/2 proto-type nearing completion , I decided to build the 1983 Americas cup winner AUSTRALIA II KA-6 .( in a 3/16" = 1' - 0" Scale.) This will be a hull only build .  When I was a kid, this Boat with all it's inovations gave the America's Cup a wake up call.   it kinda ended an Era, soon after, corporate sponsorships and constant rule's  changes would be a constant thing .( anyone who follows the Cup knows what I mean)  Don't get me wrong I am still a big fan of the America's Cup . This to me is the Boat that shook up the Cup . And is a Boat that I have wanted to build for a long time . So I thought I would squeeze it in before I start the Revised Herreshoff 12 1/2  , Plus it should be alot of fun to build

post-7445-0-38759900-1404446172_thumb.jpg

post-7445-0-60058400-1404446191_thumb.jpg

post-7445-0-99393100-1404446227_thumb.jpg

"may your sails be full of wind and the sun on your back"
 
Current Builds :

 

 

 

 

 Future Builds :
 

N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale

 

Completed Builds :

 

Volvo 65 Farr Yacht Design

Herreshoff Alerion

Herreshoff Buzzards Bay 14

Volvo Open 70

 

 Member : 

 

The Herreshoff Registry                                  Montgomery Sailboat Owners Group       Peter Kunst Sailboat Models 
http://www.herreshoffregistry.org/                       http://www.msog.org/                      http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ 

Link to comment
Share on other sites

I first layed out the Keel with the help of tracing paper and the lines drawing . I then cut out the Keel, and started to lay out the frames and deck. I think this will be a fun build , She's like 65 ft. long ( so I am not just building small boats LOL)   Here are the results

post-7445-0-03179800-1404446922_thumb.jpg

post-7445-0-06377600-1404446952_thumb.jpg

post-7445-0-22712000-1404446979_thumb.jpg

"may your sails be full of wind and the sun on your back"
 
Current Builds :

 

 

 

 

 Future Builds :
 

N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale

 

Completed Builds :

 

Volvo 65 Farr Yacht Design

Herreshoff Alerion

Herreshoff Buzzards Bay 14

Volvo Open 70

 

 Member : 

 

The Herreshoff Registry                                  Montgomery Sailboat Owners Group       Peter Kunst Sailboat Models 
http://www.herreshoffregistry.org/                       http://www.msog.org/                      http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ 

Link to comment
Share on other sites

Pete I will be following along.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Link to comment
Share on other sites

What an exciting project, i'll be sure to follow this one!

 

BTW, you might like some pictures I took of Australia II when I was in Fremantle earlier this year.

post-1526-0-19537500-1404473687_thumb.jpg

post-1526-0-95806500-1404473692_thumb.jpg

post-1526-0-72588400-1404473699_thumb.jpg

post-1526-0-04836800-1404473708_thumb.jpg

post-1526-0-14924100-1404473714_thumb.jpg

post-1526-0-56823500-1404473721_thumb.jpg

post-1526-0-04732200-1404473726_thumb.jpg

post-1526-0-38748400-1404473732_thumb.jpg

Regards, Keith

 

gallery_1526_572_501.jpg 2007 (completed): HMS Bounty - Artesania Latina  gallery_1526_579_484.jpg 2013 (completed): Viking Ship Drakkar - Amati  post-1526-0-02110200-1403452426.jpg 2014 (completed): HMS Bounty Launch - Model Shipways

post-1526-0-63099100-1404175751.jpg Current: HMS Royal William - Euromodel

Link to comment
Share on other sites

Link to comment
Share on other sites

A classic beauty.  Have fun with the build.

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Link to comment
Share on other sites

First off , Happy 4th ( there will be a big familiy celebration later ) I am hoping to get some frames cut  before I go to the party.

 

Thank you Jay , She has all the right elements, lines, beauty and speed

 

Thank you Geoff, did you take a sicky ? . and a prime minister who was a beer sculling champion. thats Awesome

 

Thank you Michael, I hope she turns out as well as the Herreshoff's

 

Thank you David B., I would like to keep it a simple build , so just the hull .

 

Thank you Michael Mott , There is always room for 1 more

 

Thank you John, I have wanted to build an Americas Cup Boat , since I was a kid . I think Australia 2 is the perfect boat for this build 

 

Thank you Omega, I was in high School when liberty lost the cup . I remember watching it on tv . it turned the sailing world upside down . I saw the cup in San diego in 87 after Dennis won it back ( Stars and Stripes The last of the 12 meters)

 

Thank you Keith, for the Awesome photos . its pretty amazing to see them in person , in 92 I saw NZL 20 up close ( its very impressive ) I would love to go to Fremantle

 

Thank you Robert , it should be fun to figure out the wing keel

 

Thank you Tom, The America's Cup has come along way ( I remember when the cup was in court , back in 88 due to a hostile Dead of Gift Challenge ) the races went on, and we defended with a catamaran ( wich was not ever spoken in the same sentence as Americas Cup ) Now look that what the Americas cup has become ( see pic )

 

Thank you Augie , should be a fun build

 

Best Regards,

Pete

 

 

 

 

post-7445-0-79491100-1404485525_thumb.jpg

"may your sails be full of wind and the sun on your back"
 
Current Builds :

 

 

 

 

 Future Builds :
 

N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale

 

Completed Builds :

 

Volvo 65 Farr Yacht Design

Herreshoff Alerion

Herreshoff Buzzards Bay 14

Volvo Open 70

 

 Member : 

 

The Herreshoff Registry                                  Montgomery Sailboat Owners Group       Peter Kunst Sailboat Models 
http://www.herreshoffregistry.org/                       http://www.msog.org/                      http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ 

Link to comment
Share on other sites

Today, I actually got more time to build than I thought. I started by laying out the rest of the frames. ( for anyone that is new to scratch building , When you use a lines drawing for your plans , You have to subtract the thickness of your planking from the frame's . or your boat will have to much Beam... just throwing it out there ) I then cut them out with an X-Acto knife ( I do not use power tools when I build models, I save that for Full size builds ) I then thought to add the America's Cup logo to the Keel . I then cut out the notches in the Keel and frames, and dry fit them . Next I cut out the deck , I then dry fit all the pieces ( I still have to trim a few frames to deck height) My wife thinks she is very Sleek , and I have to agree. I am having alot of fun with this one . I am off to the Family 4th party. Here are the results

post-7445-0-65600600-1404519808_thumb.jpg

post-7445-0-80284400-1404519848_thumb.jpg

post-7445-0-70210000-1404519887_thumb.jpg

"may your sails be full of wind and the sun on your back"
 
Current Builds :

 

 

 

 

 Future Builds :
 

N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale

 

Completed Builds :

 

Volvo 65 Farr Yacht Design

Herreshoff Alerion

Herreshoff Buzzards Bay 14

Volvo Open 70

 

 Member : 

 

The Herreshoff Registry                                  Montgomery Sailboat Owners Group       Peter Kunst Sailboat Models 
http://www.herreshoffregistry.org/                       http://www.msog.org/                      http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ 

Link to comment
Share on other sites

Very nice, but it looks as if your deck is going to be completely flat? How are you going to install the little depression in the deck for the crewmen (not sure what you call it), given that your bulkheads rise to the level of the deck?

Regards, Keith

 

gallery_1526_572_501.jpg 2007 (completed): HMS Bounty - Artesania Latina  gallery_1526_579_484.jpg 2013 (completed): Viking Ship Drakkar - Amati  post-1526-0-02110200-1403452426.jpg 2014 (completed): HMS Bounty Launch - Model Shipways

post-1526-0-63099100-1404175751.jpg Current: HMS Royal William - Euromodel

Link to comment
Share on other sites

Great start, Pete--everything looks spot on, and I agree with your wife about the Ausralia's sleekness! Likewise, good tip about moulded breath vs. breadth extreme...that one bit me once while drawing a body plan; needless to say I don't think I'll trip over that rock again ;) (that teaching lesson resulted in re-doing that entire plan, ugh).

 

Hope you have wonderful evening of celebrations with your family!

 

Cheers,

Jay

Current Build:

Link to comment
Share on other sites

Very nice, but it looks as if your deck is going to be completely flat? How are you going to install the little depression in the deck for the crewmen (not sure what you call it), given that your bulkheads rise to the level of the deck?

Hi Keith , I should have mentioned in the beginning that the sheer line is cut into the Keel. ( so the top if the keel is the bottom of the deck or deck height ) there wont be any cockpit details as this is a hull only build . the tops of the frames will be cut down to match the deck height , thus giving her the sheer line once the deck is installed . if you look at the photo you can see that the frames are to tall ( I do that so there is wiggle room ) nothing at this stage of the build has been glued . 

 

Best Regards,

Pete

post-7445-0-92942200-1404575746_thumb.jpg

"may your sails be full of wind and the sun on your back"
 
Current Builds :

 

 

 

 

 Future Builds :
 

N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale

 

Completed Builds :

 

Volvo 65 Farr Yacht Design

Herreshoff Alerion

Herreshoff Buzzards Bay 14

Volvo Open 70

 

 Member : 

 

The Herreshoff Registry                                  Montgomery Sailboat Owners Group       Peter Kunst Sailboat Models 
http://www.herreshoffregistry.org/                       http://www.msog.org/                      http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ 

Link to comment
Share on other sites

Hi  Omega , Thanks, She is practicaly building herself , everything so far has gone together very easy , She has been alot of fun to build

 

Hi Jay , It was quite the shin-dig last night , I dont think I will need to eat this week . Fortunatly, I learned the reduction in Half bredths from my Dad,( I was about 14 years old )  and the use of scantling's to make all the calculations for the frames and keel . I have been bitten by the lofting itself a few times . ( most recent is the 12 1/2 proto-type , the profile drawing was incorrect ) it resulted into alot of fairing , I can totally relate

 

Hi Geoff , The Boxing Kangaroo, is now her nickname in this house.( Full credit goes to you ,) I think it would be great to see other's who want to take on this build . or any of the modern AC boats.  here is a shot of Australia II tacking over Liberty . and I had to throw in the other shot as well

 

Best Regards,

Pete

post-7445-0-79508300-1404578706.jpg

post-7445-0-72441000-1404578739_thumb.jpg

"may your sails be full of wind and the sun on your back"
 
Current Builds :

 

 

 

 

 Future Builds :
 

N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale

 

Completed Builds :

 

Volvo 65 Farr Yacht Design

Herreshoff Alerion

Herreshoff Buzzards Bay 14

Volvo Open 70

 

 Member : 

 

The Herreshoff Registry                                  Montgomery Sailboat Owners Group       Peter Kunst Sailboat Models 
http://www.herreshoffregistry.org/                       http://www.msog.org/                      http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ 

Link to comment
Share on other sites

 Thats right Geoff, I remember that song . It was on the radio all the time .

 

Thank's Robert , It's not that I work fast , it's that I am constantly working

 

Thank you John , "The Boxing Kangaroo" Has been a fun build so far.

 

Best Regards,

Pete

"may your sails be full of wind and the sun on your back"
 
Current Builds :

 

 

 

 

 Future Builds :
 

N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale

 

Completed Builds :

 

Volvo 65 Farr Yacht Design

Herreshoff Alerion

Herreshoff Buzzards Bay 14

Volvo Open 70

 

 Member : 

 

The Herreshoff Registry                                  Montgomery Sailboat Owners Group       Peter Kunst Sailboat Models 
http://www.herreshoffregistry.org/                       http://www.msog.org/                      http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ 

Link to comment
Share on other sites

Pete- gotta admit, that I can't wait to see KA6 come to life. I too, have seen her at the Fremantle Maritimpe Museum and she is certainly every bit the holy grail of yachts; just as much as the Americas Cup, itself. Would you know whatever happened to Liberty? Is she in a Museum somewhere in the US, perhaps?

Link to comment
Share on other sites

Pete

 

I am looking forward to seeing this boxing kangaroo go forward.

 

You might even get a few more wanting to take on this build.

 

Cheers

Geoff

I love the pic Geoff , my wife thinks its great ,  It's Very inspiring ( I better not mess this one up )

 

Thank you Omega, I am not sure what happened to liberty, I will have to look into it ,( she may be a charter boat )  I am not sure wich cup boats are on display at the Herreshoff Museum and America's Cup Hall of fame, Last I checked they had America3 , another thing I will look into

 

Best Regards,

Pete

"may your sails be full of wind and the sun on your back"
 
Current Builds :

 

 

 

 

 Future Builds :
 

N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale

 

Completed Builds :

 

Volvo 65 Farr Yacht Design

Herreshoff Alerion

Herreshoff Buzzards Bay 14

Volvo Open 70

 

 Member : 

 

The Herreshoff Registry                                  Montgomery Sailboat Owners Group       Peter Kunst Sailboat Models 
http://www.herreshoffregistry.org/                       http://www.msog.org/                      http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ 

Link to comment
Share on other sites

Hi Omega, and for anyone else who is intrested . I did some research on liberty. It seems that She was sold to a Japanese Broker and shipped to Japan. Here is the Quote I found : "For the boat, Dennis Conner's 'Liberty',we do not know about what she is doing now. However, she had been in Japan certainly. We know some sailors who had sailed Liberty. Since she has been lost, many people looked for her, and we received a lot of inquiries about it. May be someone who didn't know about her history sold or let her die (rusting away) “

But the yacht was the only one up to now which forced the challenger to sail all 7 rounds before she lost  finally 4 : 3 ".  And here is a pic of her being shipped off from San Diego

post-7445-0-43829000-1404667340_thumb.png

"may your sails be full of wind and the sun on your back"
 
Current Builds :

 

 

 

 

 Future Builds :
 

N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale

 

Completed Builds :

 

Volvo 65 Farr Yacht Design

Herreshoff Alerion

Herreshoff Buzzards Bay 14

Volvo Open 70

 

 Member : 

 

The Herreshoff Registry                                  Montgomery Sailboat Owners Group       Peter Kunst Sailboat Models 
http://www.herreshoffregistry.org/                       http://www.msog.org/                      http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ 

Link to comment
Share on other sites

Hi Omega, Perhaps ,or the 87 winner,or Maybe a 92 challenger ( hint )

 

Best Regards,

Pete

Edited by Pete48

"may your sails be full of wind and the sun on your back"
 
Current Builds :

 

 

 

 

 Future Builds :
 

N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale

 

Completed Builds :

 

Volvo 65 Farr Yacht Design

Herreshoff Alerion

Herreshoff Buzzards Bay 14

Volvo Open 70

 

 Member : 

 

The Herreshoff Registry                                  Montgomery Sailboat Owners Group       Peter Kunst Sailboat Models 
http://www.herreshoffregistry.org/                       http://www.msog.org/                      http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ 

Link to comment
Share on other sites

Hi Omega, I hear what you are saying,   the " Boxing Kangaroo "  to me is the Cup Boat to build ( I had considered others ) She's got that certain somthing that the others just dont have .

 

Best Regards,

Pete

post-7445-0-59685100-1404746134_thumb.jpg

"may your sails be full of wind and the sun on your back"
 
Current Builds :

 

 

 

 

 Future Builds :
 

N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale

 

Completed Builds :

 

Volvo 65 Farr Yacht Design

Herreshoff Alerion

Herreshoff Buzzards Bay 14

Volvo Open 70

 

 Member : 

 

The Herreshoff Registry                                  Montgomery Sailboat Owners Group       Peter Kunst Sailboat Models 
http://www.herreshoffregistry.org/                       http://www.msog.org/                      http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...