Jump to content

Dremal Power Tool


Recommended Posts

I am considering purchasing a Dremal, but wanted to get some thoughts before I do. I have never bought power tools for the ship modelling before, so this will be a whole new game for me.

My latest build has quite a lot of sanding intricate areas, so a Dremal might make it easier to produce the results I desire.

 

Any thoughts on Dremal, or other mini rotary tools would be greatly appreciated.

 

Regards

 

Adam

Link to comment
Share on other sites

You can buy a Dremel, but others on MSW also use Proxxon and Foredom. When purchasing a rotary tool, these are (IMHO) the most important considerations:

 

- Price. Dremel is the cheapest and most available, Foredom costs the most.

 

- Chuck diameter. Dremel has the smallest chuck (which limits the size of the tool you can hold). Foredom has the largest.

 

- Flexible shaft. AN ABSOLUTE NECESSITY IMO. This allows you to hold the tool with a pencil grip and saves you from having to wrestle a large tool when performing delicate work. All three systems have flexible shafts as an accessory. With Foredom, you have a choice of many different shafts and heads.

 

- Tool bits. All accessories are interchangeable between Dremel, Proxxon, and Foredom - with the notable exception that larger diameter shank tools will not fit if your chuck diameter is too small (see point #2). Just because Dremel has the largest and most available selection of tool bits should NOT influence your decision. You can easily use a Dremel tool bit on a Foredom if you so choose.

 

- Smoothness. Proxxon and Foredom are said to be noticably smoother than Dremel with less rotational eccentricity. Important if you are carving very fine work but not so much if you are using your Dremel as a Drum sander or to cut bits of wood off.

 

- Foot pedal. Only Foredom has a variable speed foot pedal. This is important because your tool is not rotating when you apply it to the workpiece - increasing your precision. Both Dremel and Proxxon can be adapted with an "on-off" pedal, but this does not give you the ability to adjust speed using foot pressure.

 

I have a Dremel and I am happy with it. Good luck with your choice.

Link to comment
Share on other sites

Whichever tool you select, I suggest you get one that is NOT battery operated.

 

The re-chargeable Dremel I was given for Christmas was just about useless.  It lacked torque and the charge went away very quickly.  Although it was given to me to replace my 20 year old Dremel that finally bit the dust, I got so frustrated using it I bought a new plug-in model. I got the cheapest model and use my soldering iron rheostat to control the speed.

 

Any of these tools will become invaluable for your modeling as well as for use around the house.

Edited by bogeygolpher
Link to comment
Share on other sites

Have had Dremel  for years. Somewhere I obtained a larger chuck, so have the one that came with it and a larger one. I rarely use the burs, when I do I use the flexible shaft. As was mentioned, if I need anything other than free hand precision a stand and some sort of 3 axis moving table to hold the work would be needed, I don't have a setup like that but do have a mill. Have used the cut off tool the most for rivets and small bolts. Have also used it with small drill bits for making hidden stitching holes for Cheyenne Rolls on saddles, it worked but tended to burn the bits, I went back to using awls. Was told to buy the more expensive dremel that used roller bearings in the motor, bought the 395 type 4 with bearings and it is still running fine, should last me as long as I will be wanting it.

jud

Edited by jud
Link to comment
Share on other sites

While a Dremel has a lot of uses, here's what I've been using for most of my sanding... they don't take as much off as fast as with Dremal. http://modelshipworld.com/index.php/topic/341-micro-power-sanders/

 

Having said that, what the others have said about speed, power vs. battery, and the flexshaft are very true.  

Link to comment
Share on other sites

Thanks for all the advice. Mtaylor, I had a look at that sander by Micromark. It looks great, however because its designed for America, it probably wouldn't be the correct AC rating for us in AU. The thing that worries me about the Dremal, is being overly powerful and taking too much wood of in seconds. I guess it comes down to practice with the tool.

 

Thanks

 

Adam

Link to comment
Share on other sites

Whichever tool you select, I suggest you get one that is NOT battery operated.

 

The re-chargeable Dremel I was given for Christmas was just about useless.  It lacked torque and the charge went away very quickly.  Although it was given to me to replace my 20 year old Dremel that finally bit the dust, I got so frustrated using it I bought a new plug-in model. I got the cheapest model and use my soldering iron rheostat to control the speed.

 

Any of these tools will become invaluable for your modeling as well as for use around the house.

    For what it's worth, I have several Dremels; both corded and battery, big Lithium and old fashioned small-guy.  Each has its place.  However, I put the most mileage on the small battery Dremel.  I had (have) a 770 with a extra battery.  Agreed, the charge does not last as long as I would like, but it is not a show stopper.  The oldest battery is about to give up the ghost after many years of use.  Instead of getting another battery, I decided to get another Dremel...this time the 7700.  It seems quieter (although that may because I drove the bearings into the ground on my old one), it is quite light and has enough power for what I need most of the time. 

 

    I found that the amount of material removed has alot to do with the attachment used and the 'touch' you apply.  Whatever brand or model you choose, I think you will find it is a handy tool to have.

Link to comment
Share on other sites

Gidday Spiderpig,

 

My son bought me a rotary tool complete with 130 something accessories and a flexible shaft for around $50 AU. it came from Autobarn of all places. Admittedly I have not had much experience with it but it seems to perform OK.

 

As others have said be careful not to remove too much material.

 

Regards,

 

Mark.

Link to comment
Share on other sites

  • 2 weeks later...

I had one years ago. It finally bit the dust. Dremel is not a precision tool. But for what we do perfect. When used correctly you would be

Surprised at what it can do. Just remember that it is not a toy and where protection when you use one. Years ago I was shaping some brass and the part I was working on shattered. All I lost was a pair of glasses.

David B

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...