-
Posts
9,538 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by ccoyle
-
Welcome aboard, Dan! As a long-time former resident of Humboldt County, I feel compelled to correct your notion of 'Northern California' -- Lafayette is definitely in what we called Southern California. Northern California ended at the Mendocino-Sonoma county line. Just kidding, of course! Well, half-way, maybe. We can accept you as an honorary NorCal resident as long as you root for the Giants and not that other California Team That Shall Not Be Named (and to head off any potential wisecracks out there, the Angels and Padres are not considered worthy enough adversaries to qualify as Teams That Shall Not Be Named). Good luck with your pram, and hopefully you'll share some pictures of it!
-
The Big Reveal! All done! Believe it or not, quite a few fiddly bits 'n' pieces were added between today's update and the last one: exhaust pipes, two venturies, control horns, actuator rods, control cables, fuel line, and pitot tube. I am really quite pleased with how this turned out. Again, much of the credit must go to the excellent design. There were no "mystery parts" left over or construction sequences that weren't apparent in the diagrams -- truly a great kit and one to recommend without reservation. So, on to the pictures! And as a bonus, here's a family portrait of the Tiger Moth and three of her biplane sisters (clockwise from lower left: Fiat CR.42 Falco, CWL WZ.X, Polikarpov Po-2). Gotta love those Zweideckern! Cheers!
-
The previous discussion on this thread has been pared down. Please, folks, be civil in any replies you make in a topic regardless of how you feel about the subject. If you feel for any reason that a post or topic thread needs to be evaluated by MSW staff, please PM a moderator. Thank you! P.S. Please consider the discussion on this particular matter closed and move on.
-
Site Rules Clarification
ccoyle replied to Captain Slog's topic in How to use the MSW forum - **NO MODELING CONTENT**
I will echo James' comment about issues like this being handled by private message, as those of us who are reading this over our first cup of a.m. coffee have no idea what this is about and can therefore form no opinion on it. -
Okay, here are the goodies I received-- second batch arrived today. For those of you who were too slow with your wallets, these serve as examples of what you could have had. 😁 But don't worry -- there's still plenty of stuff left. Okay, since this is a ship modeling forum, I'll start with the ships. I picked up two kits from Paper Shipwright, the steamship SS Shieldhall and the turret ship Huascar. Shieldhall is preserved as a working maritime heritage ship; Huascar served in both the Chilean and Peruvian navies and can be depicted as she appeared in either service. I also picked up the pilot ship Ditmar Koel from HMV. Most of what I ordered are aircraft. I snagged three early Kartonowa Kolekcja kits (the publisher of my current project, a DH.82A Tiger Moth): a Fokker D.VII in the markings of Ernst Udet's personal mount, a Mitsubishi A6M2 that depicts the aircraft that struck and sank the escort carrier St. Lo in 1944 (first ship sunk by a kamikaze),and a Nieuport 11c that can be built in one of three versions including one that depicts an aircraft of the Lafayette Escadrille. And now for the good stuff. I got hold of no less than nine Halinski kits: a Messerschmitt Bf-109E-4/N flown by Adolf Galland (printed on glossy stock, which I wasn't aware of and which I don't care for), a Curtiss P-40E in Flying Tiger markings, and the Bf-109F-4 flown by Hans-Joachim Marseille . . . . . . a North American P-51D (John Meyers' Petie 2nd), a Nakajima Ki-84 Hayate (code name "Frank"), and an RAF Mustang III . . . . . . a Yakovlev Yak-1b ("Jak" in Polish), a Bf-109E-4 flown by Walter Oesau, and a Supermarine Spitfire Mk. Vb Tropical that can be built in either RAF or USAAF markings. Three of the Halinski kits came with laser-cut frames -- a sweet bonus. Finally, a Fiat G.50 Freccia published by Answer. The desert camo on this model is done very nicely and will complement my Fiat CR.42 (built) that was likewise published by Answer. So, lots of good stuff. Am I happy with my new acquisitions? Why, yes, yes I am. 😁 Now go and get yourselves something!
-
Hi, Ian. I'm a California ex-pat living in SC. Grew up and went to college in Humboldt County (fisheries major), and my adult children lived in Morro Bay for a time, so I'm very familiar with the type of boat you're wishing to model. They have a lot of character. Before we moved to SC, we lived in Mariposa for 12 years; we playfully referred to you Valley dwellers as "flatlanders." The kits that James H referred to are "hot off the press," so to speak, and they are cutting-edge kits of stylish working boats, even if they are not West Coast types. Cheers!
-
Eric, did the funnel have a joiner strip? If not, it's easy enough to create one from scrap paper. Use regular 20# bond for joiner strips inside narrow-diameter tubes.
-
The wing rigging is done. I wanted to do this portion before tackling the landing gear, because it requires frequently turning the model over, and the gear would just be in the way. This portion went much easier because each line has pre-drilled insertion points that make gluing easier. The lines were set with CA and later given a daub of white glue to help prevent them from coming loose.
-
Posting Problems
ccoyle replied to turangi's topic in How to use the MSW forum - **NO MODELING CONTENT**
Ah, good ol' Securi. 🙄 @James H will have to fix this for you in the a.m. -
They're called anti-spin strakes. The name is self-explanatory. As for the bit of skew, because the struts have wire innards, I was able to twist the wing slightly and make the misalignment less apparent. On another note, I was finally able to connect the irksome bit of rigging -- only took twenty attempts. 🤬
-
At this point, various factors are working against making much progress on the model. First there is, of course, holiday preparations -- tree-trimming, decorating, etc. Second is the fact that I will have family from out-of-town in this weekend, and hiding away in the man cave at such times is generally frowned upon. In the few moments I have had to work on the model, I have been attaching the diagonal bracing between the interplane struts (4 pieces). Three of them are done, but last night the fourth defeated all efforts to get one end properly secured, and at that point I thought it best to retire from the fight and live to model another day. I will post a picture once I get all the wing bracing done; the rest of it should go much better (hopefully).
-
BTW, this sale is still in full swing. Greg picked up a second truckload of kits from the estate, and there is literally something for everybody. The ship listings alone fill 24 handwritten pages and include many of Shipyard's 1/96 sailing ship kits, plus stuff from HMV, WMV, Oriel, and others. Greg is a totally legitimate seller -- I have transacted with him in the past, and I received my first set of kits from this sale last week. I just ordered a set from batch #2 as well. Be sure to check it out if you have any interest in card models at all!
-
That'd be my guess, too. It's a Model Shipways kit.
-
Mitsubishi A6M2b by CDW - Tamiya - 1:72 scale - Finished
ccoyle replied to CDW's topic in Non-ship/categorised builds
Craig, you and I are continuing to duplicate each other's model stash. I have an SBD-3 on my Christmas wish list. -
Nope, but I see you got the photo inserted. 😉
-
It's pretty straightforward. At the bottom of any reply window is a toolbar for uploading images. Afterwards, you simply click on the desired image to insert it into your post. Double-clicking the inserted image will bring up a resizing tool, so you don't have to worry about sizing images before uploading them.
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.