mbp521

Looks like it fits nicely where it’s supposed to. 
 

Merry Christmas and Happy New Year to you and Mrs. Cathead as well. 
 

-Brian

So good to see you back at it Keith! I to have been guilty of letting other things get in the way of shipbuilding. Hopefully your recent progress can inspire me to sit back down at the bench and get some work done. 
 

Here’s wishing you and your family a Merry Christmas and a safe and happy Nee Year!

-Brian

Looking good Eric. This has to be a first that I’ve seen, off-model building of the deck. I totally understand the reason behind it, given the deck is not too structurally sound, and the pressure needed to deck the frames. I admire your approach to it. Anxious to see how it all works out. 
 

-Brian

2 hours ago, KeithAug said:

It turns out that the world is incredibly blue and bright.

Right there with you Keith. I had cataract surgery on both eyes back in September. They replaced the lenses in both eyes and the world has never been so clear. I’ve been wearing glasses since I was nine and contacts the last 40 years, and I am amazed at the clarity the surgery has given me. 
 

-Brian

Congrats on a magnificent build. It’s been a pleasure to ride along on the journey. 
 

-Brian

Just catching up Eberhard, and as usual your work still amazes me. 
 

-Brian

1 hour ago, KeithAug said:

I guess she is quite stern heavy - a common problem! 😀

Oh so true Keith. She’s going to have some weight to her. 
 

-Brian

Hello again everyone,

It is finally about time that I get back to the bench and get some real work done, and not this around the house to-do list stuff. I don't have a lot to show right now, since I am just getting back into the groove, but I wanted to get something out there. I last left off working on getting the bottom of the hull covered. I was initially going to skin the whole thing over with basswood sheets, but the bow and the stern area had way too many compounding curves and angles to get the wood sheets to lie down correctly so I then decided that I would plank it to see how that would look. Still with the difficult curvatures around the Kort Nozzles, I still struggled to get the planks to line up and lie down as well. I started planking the middle and got so frustrated that I finally decided that I would just go in and fill the whole thing with body filler. So I tore out most of the planking and used a light weight air drying clay to fill in between the bulkheads, The clay was cheaper than the body filler, but took several days to fully cure. I then took a few strips of planking and glued them in place about an inch or so apart. The strips will serve as a depth guide for the applicator as well as an indicator of how far I need to sand the body filler down. I figured with all the gaps that I was going to have to fill in with the planking in this area, I might as well save some frustration and wood and just fill the whole thing in. Besides, this area will hardly be seen at all anyway.

Here are the guide planks going and the clay filler in place. Even pre-soaked the planks had to be held in place with weights to keep their form while the glue dried.

Next I slathered on a couple of coats of body filler and let that set. This is the first coat going on. 

First round of sanding is done. There are some low spots and pinholes that need to be filled in, but for the most part I think it turned out well.

That is all for this update. I know it's not much, but I hope to have more next time around. Winter will be here before you know it which provides ample time for shipbuilding. I'm actually just tickled to finally get to use the new bench and shipyard setup.

Thanks for stopping by.

-Brian

1 hour ago, Keith Black said:

Since the Chaperon takes up most of the shelf space it sits in, wouldn't it make some sense to just let the shelf space act as a case and front it with a piece of plexiglass? 

Keith/Mark, that is exactly what I plan to do. I am going to run some LED lights to illuminate the model and enclose it with a pane of plexiglass. A lot cheaper and easier thank building a dedicated display case. 
 

19 minutes ago, Cathead said:

Gotta say I'm curious about some of the curios, like the baseballs (huge baseball fan and I have a few special ones of my own). I also dig the armadillo.

Eric, the baseballs are a couple that I had autographed, one by Nolan Ryan and the other by Tony Gwynn Sr. As for the armadillo, I got that thing for Christmas when I was around 10 years old (45 years ago). Needless to say it has a few miles on it, but since I’ve had it for so long, I find it hard to part with. One of my grandsons has laid claim to it when I’m gone. 
 

-Brian

Hello again everyone, 

Well once again I failed at taking progress photos of my work, I guess the anxiousness of me wrapping this project up got the better of me. The weather has finally cooled down, so more attention needs to be focused on other projects and to be honest, I am really ready to sit down at my new bench and start making some sawdust. The past couple of months that I have actually been doing “work” work in my new room has found me staring at the incomplete hull of my Caroline towboat, just chomping at the bit to get back to work on her. So for now, I am calling this project done. The bookcase is finished and my nicknack shelves are done, the only thing that remains is the lighting and glass for my Chaperon, but I’m putting that off for the time being. For now this will have to do.

The finished results of my bookcase and all my junk to fill its shelves. Still have more to move in, just haven’t found all the boxes with the rest of my books. 

Thanks for following along. For now I am leaving this build open for some final shots once I get the Chaperone properly displayed. But for now, I’m calling it good. 
 

-Brian

Nothing like a little gentle persuasion to get the wood to do what you want. 😁

Looking good John!

-Brian

That’s quite the unique load she’s carrying. A far cry from the normal cotton bales. 😁

The masking tape tarpaper turned out great! It’s hard to tell from the pictures, but did you leave the scribe lines for the skylight visible through the tape? 
 

-Brian

Thanks for the update Tim. You guys' level of detail is just amazing!

-Brian

1 hour ago, yvesvidal said:

Chaperon is in place, but you will need to protect it from the dust.

Thank you Yves! She’ll have a proper, dust free place once I get the bookcase completed. I just wanted to make sure she’d fit and at a good viewing angle so thats the reason for her sitting there right now. 
 

-Brian

Howdy everyone, 

I know it has been a while since I last updated this log, This has been one busy summer and I have hardly had time to work on any personal projects. Most of the last few months have been spent helping my daughter and son-in-law get their house finished, most of the stuff they didn't want to contract out like running the 900' water line, fencing, dirt work, tree clearing and other odds and ends. However with the bulk of the work done I finally found some time focus on my projects and get some work done on the shipyard.

I am not real sure what day I left off on so I will just post some of the things that I have accomplished.

First, I took ,my adjustable work bench and scaled sown the top a bit to fit in the room. The length had to be cut down to 5' from 6' and I squared off the front to make it more uniform.

I took the old gray, dinged up bottom and gave it a fresh coat of flat black, to fit my color scheme of the room a little better.

Next, I wanted to dress off the edges of the top, so I purchased some vinyl trim to protect the edges, routed the groove and installed the edging. 

The final product, I am completely satisfied with.

Then it was on to building the shelves for my reloading bench to help organize some of the clutter. I didn't take any pictures of the building process, but this is the finished results.

Next, I wanted to have a place that I could use to clean my guns, or work on them, or other tasks, but didn't want to take up more space, so I decide to build a Murphy Desk. Some thing that would fold up out of the way, but could be setup quickly if I needed the extra counter space. Again, I failed to take pictures of the build, but this is what I came up with.

Finally, needed a place to store all of my wood strips that wouldn't take up valuable counter top space. Some place out of the way, but with easy access. I decided that a small shelf under my storage area was the perfect place. I just purchased some inexpensive drawer dividers, turned them on their side and glued them into place on the shelf. Now I can keep them nice and organized and out of the way, and all I have to do is a 180 from the workbench and grab what I need.

I've started work on the book/display case. So far I have managed to get the main framework of it built, I just need to cut and install the facing and trim, then paint it all up. I plan on running lights to the display area, where my Chaperon proudly sits temporarily and I will also install a glass panel on the front to help keep the dust off of her.

More to come soon. The brutal Texas summer has finally started to subside and the weather is getting a bit more tolerable to work out in the barn.

Thanks again for stopping by, and I hope to not wait so long between updates. I'm really ready to be done with this project and get back to the Caroline. Her hull has been sitting on the workbench, neglected and untouched for way too long.

-Brian

12 hours ago, John Gummersall said:

(shall we say) "fun"

That’s one way to put it. 😁. Through all the monotony, the end result is well worth it. 
 

-Brian

1 hour ago, John Gummersall said:

It was frustrating at times and very monotonous putting in 80 planks,

Agreed! But not near as monotonous as all those battens on the Boiler and Texas deck cabin walls. 😁

-Brian

Nicely done John! Your frustration and patience paid off. They definitely look more realistic mounted on the correct side of the stationeries. 
 

-Brian

I feel your pain Eric. So many other projects keeping me away from my build, but I hope to be wrapping them up soon. To me, winter has always been prime building season. 
 

Beautiful work on the deck, the rough, rustic look brings out the true beauty of these boats. I do like your idea of wanting to build the boiler deck off the boat to save a lot of frustration of breakage when sanding the planks. I’ll be anxious to see the method that you will use getting all the posts lined up with the main deck below. I’ll just sit back and watch and learn. 😁

-Brian

I still think it’s impressive that you harvest and mill your own wood on property, then turn out beautiful work. 
 

-Brian

Beautiful work by everyone on the project. So much more detail on this larger scale than I was able to cram into my build. Keep the updates coming. 😁

-Brian

Great insight on the construction history of these freighters. Doesn’t sound like the engineers were focusing on safety and integrity of the hull as much as they were for functionality and capacity. She’s really starting to look like a ship now. 
 

-Brian

Absolutely beautiful Eric, thanks for sharing your adventure of the build. Time to now go and enjoy the fruits of your labor. Looking forward to what you cook up next in the kitchen. 
 

-Brian

Very nice Roger. A lot of work for such a tiny piece. 
 

-Brian

Beautiful door Javlin! I love the smell and look of cedar and I have an over abundance of it on my property that I could harvest and make one like that out of (and would love to), unfortunately I just don't have the tools to mill it it. Definitely don't have to worry about the termites with that door though.

-Brian