mbp521

@kurtvd19 @Keith Black Fascinating information!  When it gets broken down that way, it doesn't seem so expensive to transport goods via barge. Too bad barges are limited to the rivers and the trucks and rail cars are still needed to distribute to the other areas not accessible by river. Otherwise, prices of said goods would be considerably cheaper.

-Brian

Roger, I know I am somewhat late to the party, but I ran across this and just finished reading through this beautiful build. I envy you guys that have the talent to work with metal and get the nice crisp, clean results. Most of the time I try to steer clear of metal work, only because it's a medium that I have little experience with, as well as the tools. Maybe one day.

-Brian

11 hours ago, Keith Black said:

I hope you don't feel like I'm trying to steal your show.

Keith, by no means do I feel that way. I love the conversation and information. These details are something that I hadn’t really given much thought to, I have been more focused on the structure itself. I’m alway happy to learn and discuss more of the intricacies of the boats I’m building.  

13 hours ago, KeithAug said:

Maybe they need to consider fitting sails

Funny you mention that. As soon as Keith Black threw those fuel costs out there, my first thought was they had the right idea back in the day, sail power was so much cheaper. A lot slower, but considerably cheaper. 
 

-Brian. 

Nice job on the alterations. Glad to see that you were able to locate your missing block assembly. Nothing more frustrating than having to re-do work. 
 

How right you are, finishing up a build is a lot harder than it seems. I still look back at my previous ones and think, I need add a little bit of this and that, or a tweak here and an adjustment there. 
 

-Brian

Keith, they are 30,000 gallon tanks. So 60,000 gallons of fuel oil on board. At $3.959 per gallon that’s quite pricey. No wonder prices to ship goods has gone up. I can only imagine how far two full tanks will get them, I’m sure the mpg on those twin diesels is not the most fuel efficient. 😁

-Brian

14 hours ago, mtaylor said:

There haven't been many towboat builds and a favorite pastime some decades ago was to watch the tows and barges on the Mississippi River.

Growing up on the Mississippi River as a kid I used to love going to the old ferry landing and watching the ships go by. Baton Rouge was the final stop for some of the really big cargo ships and there were always towboats headed upriver with their cargos. I would sit in amazement that one tiny boat could push so many barges, sometimes with 50 or more strung together. 
 

13 hours ago, Cathead said:

we passed a rare tow and it was cool to see it up close and experience just how powerful those engines are; the effects of its wake lasted a long way downriver as they reverberated from bank to bank.

As I grew up my buddies and I would always see how high we could jump our flat bottom boat on the wake of the barges in the Intracoastal Canal. This was a lock controlled tributary off the Mississippi that we frequently fished, swam and knee boarded in. These boats sure could churn up the waters in their wake. 
 

11 hours ago, leclaire said:

I have thought about trying my hand at a scratch build of the the Lone Star, an old stern wheeler finally retired in 1966 after almost 100 years on the job.

Bob you should definitely give it a go. I have a keen interest in some of the more obscure builds, and would love to follow along on that voyage.

I’m also right there with you, I have seven kits that I’ve purchased over the years that need to be built. Hopefully some day I’ll get to them. Right now I’m having too much fun with the scratch builds though. 
 

-Brian

9 hours ago, bruce d said:

Any complaints, I will claim to have been hacked. And I was out of town. 

I’m sure glad the Admiral doesn’t have access to this forum. She’d swear that I posted this under a different name. 
 

…as I type this nervously looking over my shoulder. 
 

-Brian

All of those battens were indeed a tedious process, but it looks like you managed your way through it very nicely while keeping your sanity. 😁 

Sure look like someone was having an off day when they cut the hurricane deck piece out. It was probably a Friday and they were ready to go take in the South Florida night life, or maybe it was Monday after too much of the South Florida night life. 🙃 Either way ME is usually pretty good about getting replacement parts out quick.

Looking good!

-Brian

Glad to see that I was able to spark an interest in this magnificent boat. I will be following along intently! Best of luck.

-Brian

Alrighty folks, the brace is finally off and the new build has begun. Come on over and take a look.

-Brian

Greetings everyone, I am finally ready to get going on my next build. This time I am going a bit more modern and taking a step into the 20th Century.

A friend of mine asked if I minded building him a model of the Caroline N, a Mississippi River Towboat that his father-in-law named after his daughter. This sounded like nice challenge, and an excellent chance to hone my scratch building skills, not to mention I have never built any boat newer than the late 19th Century, so I accepted.

The Caroline N was built by the Jeffboat Company out of Jefferson, IN. She is 134' long with a weight of 946gt. She was originally laid down in 1973 as the Louis H. Meece for the American Commercial Barge Line. She was later purchased by the Triple M Transportation Company and renamed the Caroline N in 2004. She was sold to SCF Marine in 2012 and in 2018 she was leased by Marquette Transportation and renamed Titletown USA. As of the start of this build, she is still being operated by Marquette Transportation. She is powered by two GM Diesel engines, a 4.192:1 reduction gear box, turning two fixed pitch screws in kort nozzles and rated at 6,140hp.

I will be building this model at 1:64 scale which will put the model at just over 25" long. The hull will be POB and most of the construction will be basswood & MDF. I'm sure there will be other materials thrown in for good measure as I go along. Her paint scheme will be the blue and white from her Triple M Transportation days, as pictured below. I am currently working on getting the plans scaled to size and will be using reference photos from the actual Caroline N, as well as her sister boats the Charles Lehman (now Limestone Lady) and Richard C. Young (now Miss. Kris) for additional details.

The plans that I will be using are the original Jeffboat General Arrangement plans of her configuration in 1981 for sizing. These match up best with the photos as far as placement of critical features such as windows, doors, stacks and other details.

With all that being said, it's about time to get this build started. I'll hopefully be back shortly with the scaled plans and ready to start making some sawdust.

So pull up a chair and stay tuned.

-Brian 

2 hours ago, KeithAug said:

Brian, Your 2 weeks shore leave is over. How are you doing?

I am still around, just a couple of more days and I should get this contraption off my arm and start physical therapy (torture). With the brace gone I should be able to at least get things ramped up on my next build, At the very least I can get the build log started. Stay tuned. 😁

-Brian

1 hour ago, Cathead said:

Somehow I managed to throw out the rudders. At least that's the only explanation I have since they had vanished when I'd finished straightening up.

I’m not really surprised that these would have gotten lost, at the small scale I would’ve had a hard time keeping up with those as well. Nice  job on the scratch built ones though. Yours are probably better than the kit provided ones anyway. 

1 hour ago, Cathead said:

deck protectors (or whatever they're called).

These were the races that the tiller rollers rolled along. I can just imagine the fits you would have if the rollers were included with this kit. They would  probably be the size of a pin point. 😁

1 hour ago, Cathead said:

I know that others have argued for the lower hull being a dull red, and that's the sort of upgrade

One of the issues that I had in research was trying to find if the hull was red or black. There is no information available that I was able to dig up that showed either way. When I was discussing this with Ray Hamel at Vicksburg NMP he said that tests had been run on pieces of the wood fabric but the results of paint color were inconclusive. So I just went with personal preference to break up the coloring a bit. To be honest though, the all black scheme looks pretty good too. 
 

-Brian

Just squeaked that one in there! Beautiful mount, I love the idea of using reclaimed drawer pulls.
 

One thing of concern that comes to mind, would the sulphur in the rubber o-rings cause a reaction with the poly coating of the hull? Just curious. I’d hate for something to damage the beautiful work you’ve done. 
 

-Brian

Eric, I admire your tenacity with sticking with this build. I for one would have shelved (or trashed) it a long time ago given your frustrations with it. I have a couple of builds that have been shelved for years, due to frustrations with the instructions and the kit itself. I, like you, didn’t just pitch them due to the fact that I have a few hundred dollars tied up in the kits and felt it was a waste of my hard earned money to just toss them. I figure one day that I will dust them off, and give them another go, but for now I have plenty of other projects in the works to keep me busy for a while.

Stay strong my friend, you will persevere!

-Brian

I wrestled with the black color of the boat and went through several versions before I settled on the dark gray that I used on my Cairo. It was just seeing the boat in the different lighting and dependent on the time of day that would frazzle my brain.

-Brian

Greg you are cranking out these boats faster than I can get through your build logs. Almost hard to keep up.

Beautiful work on fleet! The grunginess and weathering is all too realistic looking. Just amazing!

-Brian

Speaking of following instructions, this conversation reminded me of another area of where the instructions are wrong and I didn't realize it until it was too late. When you get to Stage 4, the instructions show to mount the bull rail braces, part 48, to the stationaries with the opening outboard and placing the bull rails from the outboard side..

To be historically accurate, they were actually mounted the other way around to where the bull rails could be installed from the inboard side. I found this out later on when I was studying some of the contemporary photos of the boat. In the below photo, the Chaperon is on the left. If you zoom in to the starboard side where the bull rails are mounted you can just make out the framework of the braces that show them mounted this way (I thought I had a better picture of this, but I can't seem to find it right now). It would also make sense that they be installed from the inboard side, due to the fact that if a person or livestock were to lean against, or run into them they could knock the rails out of place and fall overboard.

-Brian

Beautiful work Tom, and congratulations! So sad to see the build come to an end but can't wait to see what's next. Thank you for putting this log together, I have it bookmarked for when I finally get around to building my kit.

-Brian

17 minutes ago, wefalck said:

I prefer the creative aspect of 'making' things over 'fixing' things ...

It's that fine line that we dance on with the Admiral between work and play.

A couple of years ago I bought the Admiral a Cricut for Christmas. She had said she wanted one and I thought, why not, it would keep her busy enough that she would leave me alone with my shipbuilding. Well so far, I think I have used the Cricut just as much as she has. And the honey-do list continues to grow.

-Brian

2 hours ago, Cathead said:

That's cheating, you didn't even have to shape the pieces yourself!

Yeah, I guess it is cheating a bit. But the rigging sure was easy. 😁

-Brian

On 1/15/2023 at 5:06 PM, John Gummersall said:

Instructions call to mount the bull rails on the first two support posts in the boiler room.    Problem is, even though the boiler support structure is inside the support structure, the smoke stack protrudes outside the structure.   So bull rails need to be attached to the 2nd/3rd supports posts. 

John, you absolutely got it right. I ran into the same issue with my build and placed them on the 2nd & 3rd posts for that same reason.
 

Also good thinking on reinforcing the boiler deck, a decision you will not regret. I went as far as using scrap pieces inside of the walls as well to keep them even at the tops and bottoms since the walls were so long and flexible. It added a lot of stability to the structure. 
 

She is really coming along nicely. 
 

-Brian

Thank you all for the well wishes. Even though I am not able to work on an actual wooden model ship build, I am able to work on wooden puzzle of a ship. 😁

While entertaining, still nothing like making some sawdust. Hopefully only a couple of more weeks in this contraption and I can get back to it. 

-Brian

So glad to see you back at the bench again Keith! I can’t wait to delve into the upcoming updates.
 

Kind of the opposite with the sunny days, I tend to find myself wanting to work on a build more on the cloudy days and wanting to be outside on the sunny ones. Of course wintertime sunny days can be a bit deceiving sometimes here in Texas, I can only imagine a sunny day in Michigan in the winter. I’m sure that would change my thinking in a hurry. 
 

-Brian

I have a whole box of unused drawer pulls sitting in my barn collecting dust. Now I have a prospective use for them. What a unique idea Keith!

-Brian