Jump to content

Mirabell61

Members
 View Profile  See their activity

  • Posts

    7,357

  • Joined

  • Last visited

 Content Type 

Everything posted by Mirabell61

  1. Mirabell61
    beautiful work Igor, but I ca`nt believe that this steam schooner will go through the bottle neck , unless you are able to perform a miracle ... Nils
  2. Mirabell61
    Mkmossop, I second comment and methode of Tadeusz stitch size as small as possible, and cloth-widths should be acc. to scale requirements of the epoche concerned. Using textile glue for minimal wide folding the sail edges once or twice before sewing them over is OK. If you desire best optic, sew on a bolt rope and perhaps some reinforcement patches in the sail fastening- and wear areas Nils
  3. Mirabell61
    Nice build Ioannis, wish you further much fun and success with this scratch-built cutter... Nils
  4. Mirabell61
    Hi David, I use Aluminium metal foil for the plating, please have a look at the examples in my "Pamir" build log beginning there on page 4 with post #65 of that log and onward....(link in my signiture).... Nils
  5. Mirabell61
    Thanks for looking in Denis and Scott, and all the "likes"... Denis, I have the wooden hull smooth and treated with filler where necessary, all is covered with one coat of nitro- Wood-bounder, to fix the grain. The forecastle deck is very much rounded down to the sides typical for this ship (like some fishing Trawlers have), that is what I`m working on right now. These rounded side Areas of the forecastle deck will be plated as well... Scott, thanks for dropping in,.... The plating of the hull still needs to wait until I have the decks on, and the upper two rails mounted to the sides Nils Ammendment : here a non scaled hand-scetch for illustration,,,,
  6. Mirabell61
    Very nice looking parts for masting and rigging Frank, trust you will be Setting the masts and stays in the next days... Nils
  7. Mirabell61
    fantastic Job Erik, hard to believe that this is your first wooden model, Very well done ! Nils
  8. Mirabell61
    wunderbar, excellent modeling Lee, its one of my favorites on this Forum... Nils
  9. Mirabell61
    treenailing Looks really nice Nigel, Nils
  10. Mirabell61
    Super build mate, thats a beautiful ship I like from begin on.... Nils
  11. Mirabell61
  12. Mirabell61
    Thanks for dropping in again Johann, and for your kind appreciation... Nils
  13. Mirabell61
    Nigel, thank you for your nice words....., very much appreciated, I am momentarily considering the ponce-size for the "riveting"...... my favorite Ponce structure is like I did for the "Heinrich Kayser" Steamer, but that was in scale 1:96. For scale 1:144 it might be a wee bit too large, but it would Show a clear riveted Skin structure, even when the paint is on later. Nils
  14. Mirabell61
    Chuck, laser cut gratings and coamings look great... Nils
  15. Mirabell61
    thank you David,Grant and John, David, the entire hull will be me "metal-plated in riveting mode", once the decks are established Grant and John, your nice comments are much appreciated, I`m glad you like it Nils
  16. Mirabell61
    Thank you very much Patrick, Thats a well appreciated comment of yours.... the upper two parallel rails will be of wood, (semi-round 1 x 2mm nutwood), but before fixing these I have to get the decks in place first. That will take some time. The metal plating will be between those rails, so that they have a good contact wood to wood Nils
  17. Mirabell61
    Build log part 13 a little update... applying a bit of filler for blending out transitions and putting on the transom knee-rail around the stern... Nils pencil mark for the transom rail nice smooth hull now... blending out of the propshaft housings the lines of an early "Blue Riband racer" the transom knee rail is of brass, in order to resist / avoid later dents from knocking against... Glued and fixed to the hull with 15 brass anchors 0,6 mm diam.
  18. Mirabell61
    beautiful work Ed, cutting and shaping rasping and fairing the filled out Frames, the reward is a great looking hull with beautiful lines.... Nils
  19. Mirabell61
    Talos, agree, that would be a terriffic sight, seeing all those sisters during a "Operation Sail" event or so...... The Gorch Fock II threemast barque though is a post war build, launched 1958 at Blohm & Voss shipyard Hamburg, and allthough since then many updates, changes and more safety related modernizing and fitting out have taken place, it`s momentary condition can be considered as one of the safest and well mantained ships of the german Bundesmarine. The first Gorch Fock 1, (intermediate Russian named : Towarisch) being one of the original 6 sister ships as you described , to my knowledge is moored to the pier in Stralsund (Baltic sea) waiting to be re-rigged and overhauled, provided there will be sufficient financial sponsoring. Nils
  20. Mirabell61
    thank you very much Bob, John and Martin, ....and the " likes " for your nice comments on the prototype window, ist about smallest I can make this way with my limited capability, wish I knew how etching works, but thats more for modeling professionals... I`m also thinking of the making of the only 8mm high outer deck railings. They require vertical 4 "wires" in horizontal direction as well as an (if possible) wooden handrail on top. Finaly, per Web Research, as semi material, I have found some 8mm high photo etched 6-chord material in scale 1:150 that suits well the requirements from the geometric side, I`ll do a sample and hope it shall work out well Nils
  21. Mirabell61
    Thanks for explaining Dan, I was so amazed of your speed of building,...., now I understand. Nevertheless a great model and the scale 1:192 is a very ambitious one to tackle, well done ! Nils
  22. Mirabell61
    update.... some trials for promenade-deck / boat-deck windows..... This one of the pics that Peter (Mr. Hollom) sent me with the old couple in front of the deckhouse with the windows concerned, inspired me at least to try do it in scale 1:144 and in brass. This is the result of the first trial (yet without glassing)..., before the glassing comes in, the background of the "pans" are painted silver-grey, for glassing I intend to place resin into the frame, that cures without shrinking and remains completely transparent in the frames The window is a vertical doubleframe with common mounting flange and 3 hinges sidewise for the larger frame and 2 hinges on top of the smaller frame. Its completely made of brass, if I could, and had the capability, I would have etched it out of plate.... The reason for doing this trial now, is because there may come some ideas for improvements for better looking, and when the lot is made, there will be round about 80 - 100 windows to make in repeatable mode Nils double-frame window type common frames are made from hollow brass square rod resp. rectangular rod, I soldered both together and cut slices.... soldered onto a common plate (mounting flange) and glued the hinges on (three sidewise , two at the top) the two horizontal pencil-lines resemble the deck levels on the little mock up sample and the handrail is directly under the window the model figurerine is only 12 mm high
  23. Mirabell61
    nice and fast work Dan, did you cut off the hollow eyelets or drill deep enough into the wooden hull to take them up ? Nils
  24. Mirabell61
    Hi Patrick, maybe something like this will do...... http://www.amazon.de/Millionen-Endoskop-Kamerakopf-Einstellbare-Inspektionskamera/dp/B00W6M26O8/ref=sr_1_4?s=books&ie=UTF8&qid=1438186339&sr=8-4&keywords=digital+endoskop+kamera saw them by Amazon, also Ebay, round about 25 - 35 Euros Nils
  25. Mirabell61
    Very good scaling work Patrick, awsome looking "symphony" can imagine that you could make some pretty (from interior view location) pics from all your mini models with an "keyhole Digit-camera" Nils

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...