-
Posts
2,426 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Posts posted by Rustyj
-
-
-
21 hours ago, glbarlow said:
The stem looks so cool on Syren models.
And a lot of fun to assemble.
- Ryland Craze and JeffT
- 2
-
-
That looks sooooooo nice.
- CiscoH, Nirvana, Thukydides and 3 others
- 6
-
Thank you Mike and Chuck.
10 hours ago, glbarlow said:Once again I’ll live vicariously through your work.
Thanks Glenn. And I get to relive Winnie by watching your fine work!
-
It was mentioned earlier that it's best to sand pieces prior to removing the from the billets. The way I do it is with a sanding block. I use 180 the 320 grit sandpaper. It's self-adhesive. It is also handy for finish sanding completed pieces like the stem. I usually use Minwax wipe on poly. My local store was out but they did have Watco satin wipe on poly. I've used other Watco products and liked them so I gave it a try. It's a little thicker than the Minwax but covers nice and looks the same.
Next I'll start working on the keel. Oh this is fun!
- dvm27, Freebird, CaptMorgan and 16 others
- 19
-
Yes I am planning on it. Hopefully nothing gets in the way.
- Freebird and Ryland Craze
- 2
-
54 minutes ago, Trussben said:
You can also get large plans printed and shipped to you online, on paper or mylar if needed.
I like the idea of having one mylar set. Thanks Ben.
-
Thanks Mike. I'm really looking forward to this build.
Rick Mike is correct on the two boards. The scrap pieces I had on hand were about 3" short so I put the one piece you saw across the end just to be safe. Thanks for checking in one me. I'll need all the extra eyes I can find.
I look forward to you starting your Speedwell!
- Ryland Craze and Freebird
- 2
-
I got the extra printed plans back and have completed the build board. I got a 3/4" (19mm) thick MDF board for the base. I also put two 1"x2" boards length wise underneath to ensure the board does not go out of shape. It also elevates the base in case I want to use clamps for some insane reason. The plans were attached using a 3M spray mount adhesive. It worked really well.
I also put together the keel support jigs. On to the stem next.
-
Great work Glenn. It always freaked me out when we either had to cut or remove the molding. As aways you did a perfect job!
- glbarlow and FrankWouts
- 2
-
Another superb build! It was a pleasure to follow along with you and your log will be used by many who follow!
- Blue Ensign, Ryland Craze and mtaylor
- 2
- 1
-
On 4/4/2024 at 9:01 AM, sfotinos said:
What size drill bit for the treenails using 25lb line?
I pulled out some of my 25lb line and with a #74 drill bit on a piece of scrap I got a nice tight fit.
- Ryland Craze, Stuntflyer, JpR62 and 2 others
- 5
-
19 minutes ago, Ryland Craze said:
Looking forward to your Speedwell build log. I know it will be an excellent build.
Thanks Ryland. I hope to see you at the CT show.
- Jack12477 and Ryland Craze
- 2
-
I downloaded them to a thumb drive and went to Staples. They sent them to their print shop and will let me know when they are done.
-
Hi all.
Another Syren Speedwell starting here. I received mine a couple of days ago. I haven't done more than look the wood over, print chapter one of the monograph and order copies of the first three sheets of the plans. The first two sets of parts look fantastic. As you would expect the cutting is first rate and the AYC is so nice.
My first steps will be to read the monograph a couple of time plus review Chuck's and Mike's build's. Also, I'll get the wood for the build board and glue the plans to it. Once I've completed that I'll start in on the stem.
Let the adventure begin!
-
-
Thanks Chuck. Just what I was looking for! Great to have the smell of AYC in the shop again.
- Jack12477, Ryland Craze, mtaylor and 2 others
- 5
-
Nice to see you continuing to do such nice work!
- VTHokiEE, Old Collingwood, No Idea and 2 others
- 5
-
The planking looks great and still leaves a good visual of below.
- FrankWouts, Jack12477, mtaylor and 1 other
- 4
-
-
Wonderful workmanship B.E.
- mtaylor, hollowneck, Mr Whippy and 3 others
- 6
-
1 hour ago, sfotinos said:
Hopefully by this weekend.
I'm looking forward to it!
- Nirvana, Ryland Craze, FrankWouts and 2 others
- 5
-
Very nicely done Glenn. Always enjoy your updates!
- hollowneck and FrankWouts
- 2
Sloop Speedwell 1752 by Capt Morgan (Steve) - Syren Ship Model Company - 1:32 Scale - POF Sloop
in - Kit build logs for subjects built from 1751 - 1800
Posted
Looks really nice Steve. I've put a coat of WOP on mine. I feel it helps keep it clean.
It does add a little depth to the wood but not a lot. I do put light a coat on and wipe it off right away. That seem to help retain the natural color.