Jump to content

ASAT

Members
  • Content Count

    477
  • Joined

  • Last visited

Everything posted by ASAT

  1. Ken, I’ve seen it used on wing walkways and such but not in a contemporary cockpit, at least not on the ones I worked on.... F4, A7, F16, etc... although there was a lot in a C-130....
  2. Thanks Lou, I started by painting the floorboards in front a medium brown and after it dried I painted the black over it, then I took some isopropyl on a brush and exposed the brown paint, mixed in some light tan and yellow highlights and used a dry brush technique to blend them till it looked like a worn down plywood floor... I didn’t know P-51’s had a wood floor till I started doing research for these builds, I read somewhere that they were painted with flat black paint mixed with sand for a non skid surface, so that’s what I envisioned.....
  3. Ok with me, should I delete these posts? Can you move the reply’s to the new thread?
  4. So this is my second foray into plastic aircraft, I am trying to get some skills with plastic and paint so I can build the 1/24 Airfix Typhoon. This is in conjunction with my P-40 build on here as well... Started with the cockpit, this one has the belts molded into the seat, came out OK. Man! I don’t know how anyone could fold and make PE belts look that good! Know I know the P40 belts are way too big these things are tiny! Probably 1mm or even less!! Instrument panel and try some wiring on the radio stack up next....
  5. Started with the cockpit, this one has the belts molded into the seat, came out OK. Man! I don’t know how anyone could fold and make PE belts look that good! Know I know the P40 belts are way too big these things are tiny! Probably 1mm or even less!! Instrument panel and try some wiring on the radio stack up next....
  6. Wow! Nice work! Detail to the max! You need to tell me how you did all that detail - ever want to do a tutorial build? 😀 I guess references are half the battle? Is that all eduard detail stuff or do you use wire,solder etc to enhance?
  7. Thanks guys, I have been watching all kinds of vids on it and our own James H. Did a step by step build for a modeling book on typhoons and for Scale Modeler International’s mag, got the cover of both! I found a copy of the book plus some other great resources on a subscription service Scribed.com - that guy can build!! I am waiting again for stuff for the P40 so I am going to start the Airfix P-51 till I get the mr.surfacer and masks I got for the P40.
  8. Look what the Amazon Man just brought! (Disinfecting wipes not included) 😎 Build log coming soon!
  9. I know what you mean Edward, I’m stuck at home working and my P40 is just calling out to me..... nice looking paint job there.... is that with an airbrush?
  10. Hmmm - on that pic those wing gaps look huge! Do I need to fill them before I primer it? They don’t look that big sitting on the bench but I guess there wouldn’t have been any gap on the real thing right? I just hate to have to sand it with all that nice rivet detail so close to the gap..... ideas please?
  11. Man! What a nice kit this is! I can’t believe how everything fits together, light years different than the stuff I used to build.... very little filler needed and all the seams matched up really well. I am amazed at how the wing roots, fillets and fuse to wing joints were just a pleasure to fit and fair. I might just be swayed - might have to try a new release armor kit too! 😁🤯. Here’s a few shots before I spray it with primer - all my mistakes are right out in the open....
  12. Thanks Lou, yeah looking at some other builds online I’d say they should have been 1mm wide but as fiddly as the little wire buckles were at 2mm I would probably still be doing them at 1mm. Appreciate the good word though, maybe on my next build I’ll try something smaller or PE... I’ll have a 1/48 eduard set by then - I can probably make them work on the P 51 I have waiting...
  13. and this is how they look with the cockpit sides on - they really are a focal point since that’s about all you’re gonna see when you look in the cockpit.... definately need to make the next ones smaller or use some aftermarket- but these guys are only 2mm wide - I don’t know if I can handle them smaller .... need a bigger scale!
  14. Well the C-Vi must be taking its toll on Amazon too, I just got word that my seat belts are delayed and the 1/24 Typhoon got lost somewhere between the model shop and USPS.... so I had to re order it and now it won’t be here till next week or the week after. I decided I have waited long enough for the P40 harness so I tried my hand at making some out of asking tape and annealed wire. They are a bit out of scale (unless they were made wider than I think they were) but they look ok for my first attempt... and this is my learning mule after all! Here’s some pics .....
  15. I’m liking your Dauntless Edward, it’s got me thinking....
  16. Got the instrument panel painted and decals and prepped a few air intake pieces and the wheel wells, still waiting on my belts so I can put the cockpit together and close up the fuse....pretty cool the way those screens show up with a wash.... I don’t think you’ll see em in the model though....
  17. Thanks guys for the kind words, and all the likes! Didn’t do anything on it tonight, wife and I just hung out together on the couch and watched some movies.... trying to de stress and chill from all the strange days lately.... hoping everyone stays safe....
  18. Hey OC! Your Mossy and CDW’s TBM are a big reason why I thought I would give plastic a whirl again! That and our illustrious Admin James H. - I checked in on a few of his builds and reviews and asked him for input on a large scale build. I was considering the 1/24 Airfix Hellcat and he pointed me to the Typhoon - I really like the look of that one, probably cause of the huge “mouth” intake... reminds me of the A7E’s I used to work on during my Navy days back in the mid 70’s - made two Westpac’s on the USS Coral Sea and the USS Kitty Hawk as a flight deck troubleshooter aviation electricians mate. Best job I ever had! Looking forward to learning the nuances of plastic with you guys!!
  19. And here dry fitting together and in place in fuse....
  20. And here is the cockpit built up and my first try at weathering/wear....
  21. So here are some pics of my start, I haven’t done a plastic model in a loonggg time and when I did I didn’t use an airbrush or weathering techniques so as you can see it’s not my forte.... I did try and show some worn paint area’s where I think the pilots feet, and seat would wear/chip paint. I definitely need you guys to help, suggest, guide me so my next build and subsequent get better and better. I am impressed with the fit and engineering of this kit though, but it is definitely tough painting details at this small scale.... feel free to critique and offer critique and advise for more realistic outcomes.... here are the cockpit side walls before and after decals and dry brushing, need to get some decal setting solution though - the decals won’t conform to the relief molded into the parts.... I’m dreading the instrument panel decal....
  22. Hi everyone, so this build is a precursor to prepare myself for an Airfix 1/24 Typhoon build that I am waiting to receive due to “delays due to the recent earthquake in Salt Lake City” that’s what amazon said anyways. So I went to my local Hobby Lobby and bought some 1/48 scale kits - the Airfix P-51 and P-40 new release’s and the Revell 1/48 B-25J kit - I thought I could develop some needed skills on the two fighters, and I just really like the B-25 and they were all around $20 ea with a coupon at Hobby Lobby so I dove in. I decided to build the P40 first, it looks like a nice kit, very clean parts, no flash to speak of and only a few mold lines to remove so far. I have the cockpit almost done but there are no seat belts or harness for the seat - there is a pilot figure with a harness molded in but I’m depicting them all wheels down, like they are parked on the tarmac so no pilot figure for me. So I’m waiting for a harness kit from eduard and while I’m at it I ordered some paint masks for the canopy and a camouflage set too.
  23. Just got mine - 10 days transit! But it was intact with no damage (UPS) Assembling it now.... I would add that a sanding block of some sort should be added to the list of tools required- the knife cleans the parts ok but the nubs need to be sanded flush..... in fact after doing a few nubs I am just using a sanding block with 100 grit on it.... and I am using 3M contact adhesive for the adhering the white laminated piece’s. just preference for laminating stuff...
  24. Thanks for the likes and comments guys, not yet Malcom but close.... I’d say around 30-40 hours or so by now....
  25. Beautiful planking Rusty! That Pear looks cherry! 😀 Sorry, couldn’t resist..... your color is really consistent, it’s going to age soooo nice.....Gonna be awesome with the black wales too!

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...