NRG Photographic Model Ship Competition - All eligible to enter - Reduced memberhsip fee - JULY 31 ENTRY DEADLINE
×
New Banner Ad Sponsor - Epic Engravers - Great plank bending machine (also bends thin metal sheets) and unique engraved coins to label your model displays!
×
mtaylor
-
Posts
26,270 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by mtaylor
-
Hubert did post videos here, but I haven't seen his name come up yet.
-
Hi Colin, Good to see that you and your build log are back.
-
Hi Kats, I'm happy to see your back and reposting. What the others say: This is a very special re-build.
- 237 replies
-
- 1
-
-
- cutty sark
- revell
- (and 2 more)
-
Pop that question in the rigging section. It's possible someone has an answer. Or, PM Gill directly. Maybe he'll re-start his log.
-
Hi Denis, I'm happy to see you're putting the log back up. I was hoping to see it finished and now it looks like I will since your back and posting the progress. No rush.. no pressure.
-
Mayohoo, good to see you found your way back and will carry on the build log. I'm looking forward to it.
-
Thanks for the nice comments everyone. Harvey, I almost tossed mine for the same reasons. But I remember walking her in around '74 in Baltimore. The kit looked like she did then. So it wasn't fiction. It was laziness. They never changed the kit after the truth was out. It was a few people pointing me in the right direction that spurred me into this bash. Funny thing.... I noticed that AL include the hull hog that was there in '74. BTW, the scale is pretty close to HO and not what they had on the box. A bunch of stuff was either fiction or the wrong scale. Thanks Frank. I've had few people say they like that stern shot. Maybe I should give up model making and go back to photography?
-
Ok... it's something else going on.. I'll get back to you when I find out.
-
Hold that thought on the print and download buttions. They're not working right for me, but appears to be my settings. Might work for you.
-
Mark, You made that capstan look easy this time around....
-
Better unshrink yourself Michael. At that size, jumping off the work table to get a piece of wood might...no... will be disasterous.
-
ancre Le Fleuron by cabrapente - FINISHED
mtaylor replied to cabrapente's topic in - Build logs for subjects built 1501 - 1750
NIce work on the brass, Cabrapente. It looks like where the play is coming from on the right side of the nut (last photo of lathe). Is there a locking screw on the tailpiece that you can loosen and push it in further? The red line I drew shows that the whole assembly is loose. To the right of that line appears to be a set or lock screw. The white arrow is a mistake, I meant to point to the screw.
- 332 replies
-
- 1
-
-
- le fleuron
- 64 gun
- (and 1 more)
-
TB, Were working on it. I vaguelly remember that and thought the vid might have cross-linked from Hubert's site. Give it some time and perhaps someone will re-post it.
-
Walter, So far you only have one page. Down near the bottom on the left, is a printer icon and a download icon. That might be what you are looking for.
- 208 replies
-
- 1
-
-
- meridea
- repair ship
- (and 1 more)
-
There's also this article from the Database (see top of page menu for browsing): http://modelshipworldforum.com/resources/Framing_and_Planking/plankingprojectbeginners.pdf
-
John, The pic didn't come through. You might have to click the "post image" (I think that's the wording) after it's uploaded.
-
Thanks for the nice comments, everyone. Sjors, it was on the old MSW.. probably buried somewhere. Patrick, when you're ready or before, ping me. The AL kit has a lot of pitfalls when built out of the box.
-
This tool is full of pluses and minuses. Relatively inexpensive (for a mill), lightweight, small, has reasonable power for its size. All controls are easily used and seem very precise. Two downsides.. the first is that accessories relatively hard to come by. Everyone sells accessories for the larger "mini" size, the R8 from MM or Sherline type. The other is the RPM is limited to 2800. I was able to rework the pulleys so it turns at about 12,000 rpm. But I have to monitor the bearing temperature and I killed the warranty with this mod. I've also had to adapt vises and hold pieces to fit as they are all for the larger mills. This also, not a production type tool. Not designed to run 8 hours a day even before the RPM boost. All in all, not a bad value for the money. However, given what I know now, I go for the mini type available from MicroMark, Harbor Freight and Sherline. Probably the Sherline with their RPM kit.
-
I've had mine for a few years. It does a good job as long as I'm not trying to take off too much wood, feed the wood through too fast (slowly feed, very slowly) and not trying to do too much at once. In other words, for a few pieces at a time, it works. There's no way of setting the thickness except by trial and error that I've found. This sander, is not a Byrnes Sander by any stretch. If I were buying one today, I'd hold off until I could afford a Byrnes.
-
- 2
-
-
I bought one some time ago when it was on sale. Here's the current webpage: http://www.harborfreight.com/power-tools/cut-off-saws/bench-top-cut-off-saw-42307.html This is similar to the one MicroMark sells for roughly twice the price. It's a good tool but not a great one. Once the miter guage is calibrated, it cuts crisply and cleanly with no blade wobble. The vise holds the wood firmly. However, the miter gauge will need to be checked anytime it's moved to a new setting due to the slop in the mechanism. Also, use a piece of wood about 1/16" (1 mm) or so behind the workpiece to move it forward otherwise the wood is not completely cut. Below is a pic of mine with an attachment so can see where the blade is actually cutting. It also provides a precise method ot put a small ruler to get repeatable cuts. Would I buy another one? Yes. For the money, it's a pretty good deal as long as you're aware of it's limitations
-
Good to see you back here, Toni. What many of us are doing is either (as Remco put it) a "Management Summary" of pictures only and minimal text or just picking up where we are now. Your choice.
-
That won't have been from the "Wooden Ship Modeling for Dummies" site would it? http://www.shipmodeling.ca/index.html BTW, this site is well worth the small one time fee to get in.
-
Mike, This is one impressive and rarely seen model. I hope you'll keep us abreast of things.
-
Hi Walter. Click on "More Reply Options". Down at the bottom of the reply window, is the Attachments. You have two choices... either the Basic Uploader (files are uploaded one at a time) or Advance Uploader (lets you do a massive upload). Once you click browse, just find your photos on your PC and upload. Hope this helps. If there's any questions or if you need more help, put a post in the site suggestions and problems area.
Our Emblem ®
