Beef Wellington

Incredible accuracy! Something I tried to aim for, but was not as pedantic as you are, so have a few minor alignment issues here and there
Please resist the temptation to lower the bar and make shortcuts. It is common to see people being super precise and detailed when making a keel and deadwood, and then speeding up when it's time for frames. You seem to keep the same precision from the beginning of the build!

Jim, I think you've got this sorted and good input from others.  Just for completeness though, Petersson also shows the double systems for the fore and main yard so there really is no conflict.  As Rick points out, whether double and single comes down to yard size and basic engineering.

little update..
(a few of the ultimate pics)
 
Nils
 

the bridge wheelhouse is removeable for viewing the nautical crew...
 
 

Captain, Helmsman, and the two machine telegraph-operators
 

 
the boy is offering the latest "board news"
 
 

talks on the forecastle deck
 
 

 
 

......."Muss i denn, muss i denn zum Städtele hinaus"......  (old folkssong, later also interpretated by Elvis during his serving time in Germany)
 
 
 
 
 
 
 
 

I'm 'away' for a few months and I find you've started another model - the moss most certainly does not grow on you Sjors!  (if the expression translates!)  Looks like you're off to a great start despite the keel setback, should be beautiful when completed.  How does she compare sizewise to the Aggy? - bigger ship but a smaller scale?  I did not see the popcorn machine on the way in, is it gone already?

Just an update on the barge prototype.  Work has continued since I got back from Annapolis.  It was quite inspiring.  Compare some of the images of the contemporary barge model.  It was very helpful being able to examine it close up.  The riser and stretcher timbers have been added.  All are laser cut.  Then the forward platform.
 
I am now test fitting the thwarts in position.   These are all just dry fit.  No glue.....yet.   The thwarts are all laser cut with etched trim.  There are little notches laser cut on both sides to accept the center board between each thwart.  I will dry fit them all together and then glue them in afterwards.  I want to ensure a proper fit with thaat center board going straight down the center.  Once I know that is OK I will glue them in and paint them.  Or paint them first...I am not sure yet.
 
Chuck
 

 

Another small update - futtock shrouds done. The chainplates were made by wrapping the deadeyes with .8mm brass wire & soldering them shut. Then the ends were cut off & flattened by pinching them in a vice. Finally,a hole was drilled in the flattened ends. Hooks left over from a previous build were used to rig the shrouds.Smaller hooks were used on the mizzen shrouds.
 
      Mark

Jim, I think you've got this sorted and good input from others.  Just for completeness though, Petersson also shows the double systems for the fore and main yard so there really is no conflict.  As Rick points out, whether double and single comes down to yard size and basic engineering.

Timothy Wilson, "Flags at Sea", page 22 - "Ships that were not attached to a fleet or under the command of a flag officer wore colours as if they were part of the red squadron - red ensign, jack and a red or tricolour pennant."
 
John

I promised that I would post a picture of the guns when I got them rigged.  I had thought I would have them all done by Sunday, but they took a bit longer.  I tried finishing off the rigging of the first two while leaving the carriages un-cemented, as Peter suggested.  What I found is that the gun would move as I tried setting the eye & ring bolts in the bulwark, and pull the bolts out (blame my unsteady hands).  That served as more evidence that I saved many lives when I decided not to be a surgeon. 
 
So, here they are: 
 

 
I've started on the gangboards, simply planking the kit-supplied thin plywood:
 

 
These will need some kind of molding along the edges to finish them off (and to conceal the plywood base).  You can also see that the wider end is lacking the tab that would fit under the quartedeck beam.  I'm following BE's lead here in cutting the tabs off in order to abutt the gang boards a bit higher.  The purpose is to keep the forward ends a bit above the covering board in the waist, to allow the gangway to sit under the gang board.
 
One question I've asked myself involves the support of the gangboards.  FFM shows a knee -- either metal or wood.  These knees would be right up against the first knees of the gangways.  I am thinking of departing from that structural arrangement and supporting the forward inboard corner with a post.  Logically it would be an interference for the gun crew;  but in my mind's eye a post seems more elegant.  And it would follow the line created by the newel post above.
 
The knees for the gang ways will go in, however.  I've cut and shaped all eight of those.  Here is a sample of three:
 

 
The tops are angled in order to accommodate the shape of the bulwark.
 
I do wonder if I should perhaps hold off on the gangboards until I've taken care of the pumps and other details.  Hmm, I'm not sure.
 
Cheers,
 
Martin

Carl, Rob, Christian, Niles and the likes - thanks for your kind words, encouragement and patience on this slow voyage...
 
Jesse, Dave - Of course you are right, but no matter how many times I tell myself that it doesn't help...I probably have one of those personality disorders along the lines of "well he did it, so why can't I?"   And yes, its gets me into trouble with those fixes around the house that I maybe shouldn't be tackling.. 
 
Anyway a little update as I really can do no more to the bow at this point, which means I need to get back to the stern...then I remembered that that was basically the reason for me taking a break and starting work on the bow...There are a couple of questions at the end.
 
Once the cheeks and the rails were done, I needed to tackle hawse holes and the bolsters.  These had me really thinking, but first step was once again to shape from some thick stock, only this time I had to take it even slower as pretty much the entire interior face needed to fit tightly against the hull because any errors would be really obvious once the holes were cut.  The balsa filler blocks were also removed (Interestingly, you can see the outline of the recess that I had put in a long while ago to try to introduce a void behind the expected hole placement to look a little more authentic...seemed a good idea at the time but they would have been in slightly the wrong place)
 
The holes themselves are ~6mm in diameter, and taking a drill bit of that size was clearly out of the question.  The hole centers were estimated and I drilled with a 2mm bit in a hand drill.  This was large enough to get a round microfile in to gradually enlarge and then use a larger round file.  Once the holes were approx. 4-5mm and still quite rough, some tapered dowel was used with sandpaper around to again gradually enlarge until they were approximately the right size.  All the time doing this, the bolsters were held in place with fingers so everything would align - I didn't want to commit to gluing in place just yet.

Once again, I knew I'd be making my own out of castello, but continuing the trend I think the kit supplied parts are way undersized.

One other item to take care of is the Gamming knee, the kit supplied part was generally oversized, but it was necessary to cut a new piece because the back of the knee was undersized.  Not sure how much of this will be visible, but it fun to make.  The hole is for the mainstay collar, some alteration will likely be needed on the head timbers but that is for another day.  This is not attached yet.
And the final results...these pieces seem to really bring out the face of the ship and to my eye really add some character.

 
Some questions:
The bulwark are considerably thinner than they would be in scale, and although the photo makes it more obvious, this is apparent if you look for it.  Also, I know that the hawse holes were lined in lead, but I'm not seeing this as a feature standing out to me looking at models, in many it seems these were just painted ochre...would welcome other's thoughts and suggestions here.  I'm leaning toward a 'lead like' grey just on the inside of the bulwark but not extending over the bolster. For fellow Diana kit builders.  I placed the waste rail on the starboard bow side only as it seems to me that this could cause problems with the fitment of the bow grating against the hull - anyone have any experiences on this?  
 
 

Carl, Rob, Christian, Niles and the likes - thanks for your kind words, encouragement and patience on this slow voyage...
 
Jesse, Dave - Of course you are right, but no matter how many times I tell myself that it doesn't help...I probably have one of those personality disorders along the lines of "well he did it, so why can't I?"   And yes, its gets me into trouble with those fixes around the house that I maybe shouldn't be tackling.. 
 
Anyway a little update as I really can do no more to the bow at this point, which means I need to get back to the stern...then I remembered that that was basically the reason for me taking a break and starting work on the bow...There are a couple of questions at the end.
 
Once the cheeks and the rails were done, I needed to tackle hawse holes and the bolsters.  These had me really thinking, but first step was once again to shape from some thick stock, only this time I had to take it even slower as pretty much the entire interior face needed to fit tightly against the hull because any errors would be really obvious once the holes were cut.  The balsa filler blocks were also removed (Interestingly, you can see the outline of the recess that I had put in a long while ago to try to introduce a void behind the expected hole placement to look a little more authentic...seemed a good idea at the time but they would have been in slightly the wrong place)
 
The holes themselves are ~6mm in diameter, and taking a drill bit of that size was clearly out of the question.  The hole centers were estimated and I drilled with a 2mm bit in a hand drill.  This was large enough to get a round microfile in to gradually enlarge and then use a larger round file.  Once the holes were approx. 4-5mm and still quite rough, some tapered dowel was used with sandpaper around to again gradually enlarge until they were approximately the right size.  All the time doing this, the bolsters were held in place with fingers so everything would align - I didn't want to commit to gluing in place just yet.

Once again, I knew I'd be making my own out of castello, but continuing the trend I think the kit supplied parts are way undersized.

One other item to take care of is the Gamming knee, the kit supplied part was generally oversized, but it was necessary to cut a new piece because the back of the knee was undersized.  Not sure how much of this will be visible, but it fun to make.  The hole is for the mainstay collar, some alteration will likely be needed on the head timbers but that is for another day.  This is not attached yet.
And the final results...these pieces seem to really bring out the face of the ship and to my eye really add some character.

 
Some questions:
The bulwark are considerably thinner than they would be in scale, and although the photo makes it more obvious, this is apparent if you look for it.  Also, I know that the hawse holes were lined in lead, but I'm not seeing this as a feature standing out to me looking at models, in many it seems these were just painted ochre...would welcome other's thoughts and suggestions here.  I'm leaning toward a 'lead like' grey just on the inside of the bulwark but not extending over the bolster. For fellow Diana kit builders.  I placed the waste rail on the starboard bow side only as it seems to me that this could cause problems with the fitment of the bow grating against the hull - anyone have any experiences on this?  
 
 

Carl, Rob, Christian, Niles and the likes - thanks for your kind words, encouragement and patience on this slow voyage...
 
Jesse, Dave - Of course you are right, but no matter how many times I tell myself that it doesn't help...I probably have one of those personality disorders along the lines of "well he did it, so why can't I?"   And yes, its gets me into trouble with those fixes around the house that I maybe shouldn't be tackling.. 
 
Anyway a little update as I really can do no more to the bow at this point, which means I need to get back to the stern...then I remembered that that was basically the reason for me taking a break and starting work on the bow...There are a couple of questions at the end.
 
Once the cheeks and the rails were done, I needed to tackle hawse holes and the bolsters.  These had me really thinking, but first step was once again to shape from some thick stock, only this time I had to take it even slower as pretty much the entire interior face needed to fit tightly against the hull because any errors would be really obvious once the holes were cut.  The balsa filler blocks were also removed (Interestingly, you can see the outline of the recess that I had put in a long while ago to try to introduce a void behind the expected hole placement to look a little more authentic...seemed a good idea at the time but they would have been in slightly the wrong place)
 
The holes themselves are ~6mm in diameter, and taking a drill bit of that size was clearly out of the question.  The hole centers were estimated and I drilled with a 2mm bit in a hand drill.  This was large enough to get a round microfile in to gradually enlarge and then use a larger round file.  Once the holes were approx. 4-5mm and still quite rough, some tapered dowel was used with sandpaper around to again gradually enlarge until they were approximately the right size.  All the time doing this, the bolsters were held in place with fingers so everything would align - I didn't want to commit to gluing in place just yet.

Once again, I knew I'd be making my own out of castello, but continuing the trend I think the kit supplied parts are way undersized.

One other item to take care of is the Gamming knee, the kit supplied part was generally oversized, but it was necessary to cut a new piece because the back of the knee was undersized.  Not sure how much of this will be visible, but it fun to make.  The hole is for the mainstay collar, some alteration will likely be needed on the head timbers but that is for another day.  This is not attached yet.
And the final results...these pieces seem to really bring out the face of the ship and to my eye really add some character.

 
Some questions:
The bulwark are considerably thinner than they would be in scale, and although the photo makes it more obvious, this is apparent if you look for it.  Also, I know that the hawse holes were lined in lead, but I'm not seeing this as a feature standing out to me looking at models, in many it seems these were just painted ochre...would welcome other's thoughts and suggestions here.  I'm leaning toward a 'lead like' grey just on the inside of the bulwark but not extending over the bolster. For fellow Diana kit builders.  I placed the waste rail on the starboard bow side only as it seems to me that this could cause problems with the fitment of the bow grating against the hull - anyone have any experiences on this?  
 
 

Carl, Rob, Christian, Niles and the likes - thanks for your kind words, encouragement and patience on this slow voyage...
 
Jesse, Dave - Of course you are right, but no matter how many times I tell myself that it doesn't help...I probably have one of those personality disorders along the lines of "well he did it, so why can't I?"   And yes, its gets me into trouble with those fixes around the house that I maybe shouldn't be tackling.. 
 
Anyway a little update as I really can do no more to the bow at this point, which means I need to get back to the stern...then I remembered that that was basically the reason for me taking a break and starting work on the bow...There are a couple of questions at the end.
 
Once the cheeks and the rails were done, I needed to tackle hawse holes and the bolsters.  These had me really thinking, but first step was once again to shape from some thick stock, only this time I had to take it even slower as pretty much the entire interior face needed to fit tightly against the hull because any errors would be really obvious once the holes were cut.  The balsa filler blocks were also removed (Interestingly, you can see the outline of the recess that I had put in a long while ago to try to introduce a void behind the expected hole placement to look a little more authentic...seemed a good idea at the time but they would have been in slightly the wrong place)
 
The holes themselves are ~6mm in diameter, and taking a drill bit of that size was clearly out of the question.  The hole centers were estimated and I drilled with a 2mm bit in a hand drill.  This was large enough to get a round microfile in to gradually enlarge and then use a larger round file.  Once the holes were approx. 4-5mm and still quite rough, some tapered dowel was used with sandpaper around to again gradually enlarge until they were approximately the right size.  All the time doing this, the bolsters were held in place with fingers so everything would align - I didn't want to commit to gluing in place just yet.

Once again, I knew I'd be making my own out of castello, but continuing the trend I think the kit supplied parts are way undersized.

One other item to take care of is the Gamming knee, the kit supplied part was generally oversized, but it was necessary to cut a new piece because the back of the knee was undersized.  Not sure how much of this will be visible, but it fun to make.  The hole is for the mainstay collar, some alteration will likely be needed on the head timbers but that is for another day.  This is not attached yet.
And the final results...these pieces seem to really bring out the face of the ship and to my eye really add some character.

 
Some questions:
The bulwark are considerably thinner than they would be in scale, and although the photo makes it more obvious, this is apparent if you look for it.  Also, I know that the hawse holes were lined in lead, but I'm not seeing this as a feature standing out to me looking at models, in many it seems these were just painted ochre...would welcome other's thoughts and suggestions here.  I'm leaning toward a 'lead like' grey just on the inside of the bulwark but not extending over the bolster. For fellow Diana kit builders.  I placed the waste rail on the starboard bow side only as it seems to me that this could cause problems with the fitment of the bow grating against the hull - anyone have any experiences on this?  
 
 

Carl, Rob, Christian, Niles and the likes - thanks for your kind words, encouragement and patience on this slow voyage...
 
Jesse, Dave - Of course you are right, but no matter how many times I tell myself that it doesn't help...I probably have one of those personality disorders along the lines of "well he did it, so why can't I?"   And yes, its gets me into trouble with those fixes around the house that I maybe shouldn't be tackling.. 
 
Anyway a little update as I really can do no more to the bow at this point, which means I need to get back to the stern...then I remembered that that was basically the reason for me taking a break and starting work on the bow...There are a couple of questions at the end.
 
Once the cheeks and the rails were done, I needed to tackle hawse holes and the bolsters.  These had me really thinking, but first step was once again to shape from some thick stock, only this time I had to take it even slower as pretty much the entire interior face needed to fit tightly against the hull because any errors would be really obvious once the holes were cut.  The balsa filler blocks were also removed (Interestingly, you can see the outline of the recess that I had put in a long while ago to try to introduce a void behind the expected hole placement to look a little more authentic...seemed a good idea at the time but they would have been in slightly the wrong place)
 
The holes themselves are ~6mm in diameter, and taking a drill bit of that size was clearly out of the question.  The hole centers were estimated and I drilled with a 2mm bit in a hand drill.  This was large enough to get a round microfile in to gradually enlarge and then use a larger round file.  Once the holes were approx. 4-5mm and still quite rough, some tapered dowel was used with sandpaper around to again gradually enlarge until they were approximately the right size.  All the time doing this, the bolsters were held in place with fingers so everything would align - I didn't want to commit to gluing in place just yet.

Once again, I knew I'd be making my own out of castello, but continuing the trend I think the kit supplied parts are way undersized.

One other item to take care of is the Gamming knee, the kit supplied part was generally oversized, but it was necessary to cut a new piece because the back of the knee was undersized.  Not sure how much of this will be visible, but it fun to make.  The hole is for the mainstay collar, some alteration will likely be needed on the head timbers but that is for another day.  This is not attached yet.
And the final results...these pieces seem to really bring out the face of the ship and to my eye really add some character.

 
Some questions:
The bulwark are considerably thinner than they would be in scale, and although the photo makes it more obvious, this is apparent if you look for it.  Also, I know that the hawse holes were lined in lead, but I'm not seeing this as a feature standing out to me looking at models, in many it seems these were just painted ochre...would welcome other's thoughts and suggestions here.  I'm leaning toward a 'lead like' grey just on the inside of the bulwark but not extending over the bolster. For fellow Diana kit builders.  I placed the waste rail on the starboard bow side only as it seems to me that this could cause problems with the fitment of the bow grating against the hull - anyone have any experiences on this?  
 
 

When fitting the stern davits they didn't fit as good as they should. found that I needed to add a strip under them made them sit at the right height much better. I didn't feel the pegs beneath the kit supplied cleats were deep enough to hold well when rigging is pulling on them so I snipped them off, drilled them out and glued wire pins in that will sit deeper and grab the wood better. Stern davits and cleats on and painted.
 
Jesse
 

Shaped and added timberheads. Used a strip of paper to space them out evenly.
 
Jesse
 

Carl, Rob, Christian, Niles and the likes - thanks for your kind words, encouragement and patience on this slow voyage...
 
Jesse, Dave - Of course you are right, but no matter how many times I tell myself that it doesn't help...I probably have one of those personality disorders along the lines of "well he did it, so why can't I?"   And yes, its gets me into trouble with those fixes around the house that I maybe shouldn't be tackling.. 
 
Anyway a little update as I really can do no more to the bow at this point, which means I need to get back to the stern...then I remembered that that was basically the reason for me taking a break and starting work on the bow...There are a couple of questions at the end.
 
Once the cheeks and the rails were done, I needed to tackle hawse holes and the bolsters.  These had me really thinking, but first step was once again to shape from some thick stock, only this time I had to take it even slower as pretty much the entire interior face needed to fit tightly against the hull because any errors would be really obvious once the holes were cut.  The balsa filler blocks were also removed (Interestingly, you can see the outline of the recess that I had put in a long while ago to try to introduce a void behind the expected hole placement to look a little more authentic...seemed a good idea at the time but they would have been in slightly the wrong place)
 
The holes themselves are ~6mm in diameter, and taking a drill bit of that size was clearly out of the question.  The hole centers were estimated and I drilled with a 2mm bit in a hand drill.  This was large enough to get a round microfile in to gradually enlarge and then use a larger round file.  Once the holes were approx. 4-5mm and still quite rough, some tapered dowel was used with sandpaper around to again gradually enlarge until they were approximately the right size.  All the time doing this, the bolsters were held in place with fingers so everything would align - I didn't want to commit to gluing in place just yet.

Once again, I knew I'd be making my own out of castello, but continuing the trend I think the kit supplied parts are way undersized.

One other item to take care of is the Gamming knee, the kit supplied part was generally oversized, but it was necessary to cut a new piece because the back of the knee was undersized.  Not sure how much of this will be visible, but it fun to make.  The hole is for the mainstay collar, some alteration will likely be needed on the head timbers but that is for another day.  This is not attached yet.
And the final results...these pieces seem to really bring out the face of the ship and to my eye really add some character.

 
Some questions:
The bulwark are considerably thinner than they would be in scale, and although the photo makes it more obvious, this is apparent if you look for it.  Also, I know that the hawse holes were lined in lead, but I'm not seeing this as a feature standing out to me looking at models, in many it seems these were just painted ochre...would welcome other's thoughts and suggestions here.  I'm leaning toward a 'lead like' grey just on the inside of the bulwark but not extending over the bolster. For fellow Diana kit builders.  I placed the waste rail on the starboard bow side only as it seems to me that this could cause problems with the fitment of the bow grating against the hull - anyone have any experiences on this?  
 
 

Carl, Rob, Christian, Niles and the likes - thanks for your kind words, encouragement and patience on this slow voyage...
 
Jesse, Dave - Of course you are right, but no matter how many times I tell myself that it doesn't help...I probably have one of those personality disorders along the lines of "well he did it, so why can't I?"   And yes, its gets me into trouble with those fixes around the house that I maybe shouldn't be tackling.. 
 
Anyway a little update as I really can do no more to the bow at this point, which means I need to get back to the stern...then I remembered that that was basically the reason for me taking a break and starting work on the bow...There are a couple of questions at the end.
 
Once the cheeks and the rails were done, I needed to tackle hawse holes and the bolsters.  These had me really thinking, but first step was once again to shape from some thick stock, only this time I had to take it even slower as pretty much the entire interior face needed to fit tightly against the hull because any errors would be really obvious once the holes were cut.  The balsa filler blocks were also removed (Interestingly, you can see the outline of the recess that I had put in a long while ago to try to introduce a void behind the expected hole placement to look a little more authentic...seemed a good idea at the time but they would have been in slightly the wrong place)
 
The holes themselves are ~6mm in diameter, and taking a drill bit of that size was clearly out of the question.  The hole centers were estimated and I drilled with a 2mm bit in a hand drill.  This was large enough to get a round microfile in to gradually enlarge and then use a larger round file.  Once the holes were approx. 4-5mm and still quite rough, some tapered dowel was used with sandpaper around to again gradually enlarge until they were approximately the right size.  All the time doing this, the bolsters were held in place with fingers so everything would align - I didn't want to commit to gluing in place just yet.

Once again, I knew I'd be making my own out of castello, but continuing the trend I think the kit supplied parts are way undersized.

One other item to take care of is the Gamming knee, the kit supplied part was generally oversized, but it was necessary to cut a new piece because the back of the knee was undersized.  Not sure how much of this will be visible, but it fun to make.  The hole is for the mainstay collar, some alteration will likely be needed on the head timbers but that is for another day.  This is not attached yet.
And the final results...these pieces seem to really bring out the face of the ship and to my eye really add some character.

 
Some questions:
The bulwark are considerably thinner than they would be in scale, and although the photo makes it more obvious, this is apparent if you look for it.  Also, I know that the hawse holes were lined in lead, but I'm not seeing this as a feature standing out to me looking at models, in many it seems these were just painted ochre...would welcome other's thoughts and suggestions here.  I'm leaning toward a 'lead like' grey just on the inside of the bulwark but not extending over the bolster. For fellow Diana kit builders.  I placed the waste rail on the starboard bow side only as it seems to me that this could cause problems with the fitment of the bow grating against the hull - anyone have any experiences on this?  
 
 

Carl, Rob, Christian, Niles and the likes - thanks for your kind words, encouragement and patience on this slow voyage...
 
Jesse, Dave - Of course you are right, but no matter how many times I tell myself that it doesn't help...I probably have one of those personality disorders along the lines of "well he did it, so why can't I?"   And yes, its gets me into trouble with those fixes around the house that I maybe shouldn't be tackling.. 
 
Anyway a little update as I really can do no more to the bow at this point, which means I need to get back to the stern...then I remembered that that was basically the reason for me taking a break and starting work on the bow...There are a couple of questions at the end.
 
Once the cheeks and the rails were done, I needed to tackle hawse holes and the bolsters.  These had me really thinking, but first step was once again to shape from some thick stock, only this time I had to take it even slower as pretty much the entire interior face needed to fit tightly against the hull because any errors would be really obvious once the holes were cut.  The balsa filler blocks were also removed (Interestingly, you can see the outline of the recess that I had put in a long while ago to try to introduce a void behind the expected hole placement to look a little more authentic...seemed a good idea at the time but they would have been in slightly the wrong place)
 
The holes themselves are ~6mm in diameter, and taking a drill bit of that size was clearly out of the question.  The hole centers were estimated and I drilled with a 2mm bit in a hand drill.  This was large enough to get a round microfile in to gradually enlarge and then use a larger round file.  Once the holes were approx. 4-5mm and still quite rough, some tapered dowel was used with sandpaper around to again gradually enlarge until they were approximately the right size.  All the time doing this, the bolsters were held in place with fingers so everything would align - I didn't want to commit to gluing in place just yet.

Once again, I knew I'd be making my own out of castello, but continuing the trend I think the kit supplied parts are way undersized.

One other item to take care of is the Gamming knee, the kit supplied part was generally oversized, but it was necessary to cut a new piece because the back of the knee was undersized.  Not sure how much of this will be visible, but it fun to make.  The hole is for the mainstay collar, some alteration will likely be needed on the head timbers but that is for another day.  This is not attached yet.
And the final results...these pieces seem to really bring out the face of the ship and to my eye really add some character.

 
Some questions:
The bulwark are considerably thinner than they would be in scale, and although the photo makes it more obvious, this is apparent if you look for it.  Also, I know that the hawse holes were lined in lead, but I'm not seeing this as a feature standing out to me looking at models, in many it seems these were just painted ochre...would welcome other's thoughts and suggestions here.  I'm leaning toward a 'lead like' grey just on the inside of the bulwark but not extending over the bolster. For fellow Diana kit builders.  I placed the waste rail on the starboard bow side only as it seems to me that this could cause problems with the fitment of the bow grating against the hull - anyone have any experiences on this?  
 
 

Hi Thomas, somehow I've missed your Syren build up to this point, wow, just wonderfully inspirational work.  

Carl, Rob, Christian, Niles and the likes - thanks for your kind words, encouragement and patience on this slow voyage...
 
Jesse, Dave - Of course you are right, but no matter how many times I tell myself that it doesn't help...I probably have one of those personality disorders along the lines of "well he did it, so why can't I?"   And yes, its gets me into trouble with those fixes around the house that I maybe shouldn't be tackling.. 
 
Anyway a little update as I really can do no more to the bow at this point, which means I need to get back to the stern...then I remembered that that was basically the reason for me taking a break and starting work on the bow...There are a couple of questions at the end.
 
Once the cheeks and the rails were done, I needed to tackle hawse holes and the bolsters.  These had me really thinking, but first step was once again to shape from some thick stock, only this time I had to take it even slower as pretty much the entire interior face needed to fit tightly against the hull because any errors would be really obvious once the holes were cut.  The balsa filler blocks were also removed (Interestingly, you can see the outline of the recess that I had put in a long while ago to try to introduce a void behind the expected hole placement to look a little more authentic...seemed a good idea at the time but they would have been in slightly the wrong place)
 
The holes themselves are ~6mm in diameter, and taking a drill bit of that size was clearly out of the question.  The hole centers were estimated and I drilled with a 2mm bit in a hand drill.  This was large enough to get a round microfile in to gradually enlarge and then use a larger round file.  Once the holes were approx. 4-5mm and still quite rough, some tapered dowel was used with sandpaper around to again gradually enlarge until they were approximately the right size.  All the time doing this, the bolsters were held in place with fingers so everything would align - I didn't want to commit to gluing in place just yet.

Once again, I knew I'd be making my own out of castello, but continuing the trend I think the kit supplied parts are way undersized.

One other item to take care of is the Gamming knee, the kit supplied part was generally oversized, but it was necessary to cut a new piece because the back of the knee was undersized.  Not sure how much of this will be visible, but it fun to make.  The hole is for the mainstay collar, some alteration will likely be needed on the head timbers but that is for another day.  This is not attached yet.
And the final results...these pieces seem to really bring out the face of the ship and to my eye really add some character.

 
Some questions:
The bulwark are considerably thinner than they would be in scale, and although the photo makes it more obvious, this is apparent if you look for it.  Also, I know that the hawse holes were lined in lead, but I'm not seeing this as a feature standing out to me looking at models, in many it seems these were just painted ochre...would welcome other's thoughts and suggestions here.  I'm leaning toward a 'lead like' grey just on the inside of the bulwark but not extending over the bolster. For fellow Diana kit builders.  I placed the waste rail on the starboard bow side only as it seems to me that this could cause problems with the fitment of the bow grating against the hull - anyone have any experiences on this?  
 
 

Carl, Rob, Christian, Niles and the likes - thanks for your kind words, encouragement and patience on this slow voyage...
 
Jesse, Dave - Of course you are right, but no matter how many times I tell myself that it doesn't help...I probably have one of those personality disorders along the lines of "well he did it, so why can't I?"   And yes, its gets me into trouble with those fixes around the house that I maybe shouldn't be tackling.. 
 
Anyway a little update as I really can do no more to the bow at this point, which means I need to get back to the stern...then I remembered that that was basically the reason for me taking a break and starting work on the bow...There are a couple of questions at the end.
 
Once the cheeks and the rails were done, I needed to tackle hawse holes and the bolsters.  These had me really thinking, but first step was once again to shape from some thick stock, only this time I had to take it even slower as pretty much the entire interior face needed to fit tightly against the hull because any errors would be really obvious once the holes were cut.  The balsa filler blocks were also removed (Interestingly, you can see the outline of the recess that I had put in a long while ago to try to introduce a void behind the expected hole placement to look a little more authentic...seemed a good idea at the time but they would have been in slightly the wrong place)
 
The holes themselves are ~6mm in diameter, and taking a drill bit of that size was clearly out of the question.  The hole centers were estimated and I drilled with a 2mm bit in a hand drill.  This was large enough to get a round microfile in to gradually enlarge and then use a larger round file.  Once the holes were approx. 4-5mm and still quite rough, some tapered dowel was used with sandpaper around to again gradually enlarge until they were approximately the right size.  All the time doing this, the bolsters were held in place with fingers so everything would align - I didn't want to commit to gluing in place just yet.

Once again, I knew I'd be making my own out of castello, but continuing the trend I think the kit supplied parts are way undersized.

One other item to take care of is the Gamming knee, the kit supplied part was generally oversized, but it was necessary to cut a new piece because the back of the knee was undersized.  Not sure how much of this will be visible, but it fun to make.  The hole is for the mainstay collar, some alteration will likely be needed on the head timbers but that is for another day.  This is not attached yet.
And the final results...these pieces seem to really bring out the face of the ship and to my eye really add some character.

 
Some questions:
The bulwark are considerably thinner than they would be in scale, and although the photo makes it more obvious, this is apparent if you look for it.  Also, I know that the hawse holes were lined in lead, but I'm not seeing this as a feature standing out to me looking at models, in many it seems these were just painted ochre...would welcome other's thoughts and suggestions here.  I'm leaning toward a 'lead like' grey just on the inside of the bulwark but not extending over the bolster. For fellow Diana kit builders.  I placed the waste rail on the starboard bow side only as it seems to me that this could cause problems with the fitment of the bow grating against the hull - anyone have any experiences on this?  
 
 

Hi Thomas, somehow I've missed your Syren build up to this point, wow, just wonderfully inspirational work.  

Gun rigging continued . . . 7 down and 11 to go .
I am proceeding with the gun rigging in steps of 4 guns each to keep things interesting. Starting from the stern of the model it also allows to permanently mount all the deck furniture which will no longer be impacted by the rigging of the carronades, e.g. at the current stage the steering wheel with tackles, binnacle, and capstan (image 1). Image 2 shows the rigging of the steering tackles. I chose the method where both sides are rigged and the 2 ends of the rope combined underneath the steering wheel drum (see images 2 and 3). And to answer the obvious question of how these guns could be operated in such a confined space: in case of operation the tackles for the steering wheel were unhooked and the rudder operated via the tiller without wheel. That is also the reason for the shape of the tiller which has the length and the round end typical for direct manual operation. Image 4 shows some little add-ons to my Syren serving machine. It allows seizing very small eyes but also shows the potential for other simple modifications which will come in handy when I move into the rigging phase of my model. Images 5 and 6 are some additional views of the current state of the model.
 
Thomas
 

Image 1
 

Image 2
 

Image 3
 

Image 4
 

Image 5
 

Image 6
 
 

One of the last “deck furnitures” on my Syren model was the pump. To build it I followed Chuck’s plans enhanced by some additional details found in other descriptions of how the pump worked (Charles Davis, Mondfeld).
 
The major part of the pump cross bar was milled out of a brass sheet of appropriate thickness. The two end pieces consist of parts of a square brass tube, shaped according to plan and fitted on the ends of the cross bar as adapters for the handles (image 1). The platform and the stand were built out of basswood and pear (image 2). I keep using this wood combination because I want to have the advantage of pear for shaping the details, but as I initially started out with basswood I need to keep the overall appearance of the model consistent. Image 3 shows the parts which make up the pump drums. As I had decided to model the upper pump valves as well each drum is connected to a part of the pipe in which the upper valve will be moving. In image 4a the finished drums can be seen. I used a technique already described earlier in this build log (mast holes) to drill two holes in the Syren deck to receive the pipes attached to the pump (image 4b). Image 5 shows the parts and construction of the connecting arms between the pump cross bar and the upper valves. These hinged connectors are made out of brass pieces shaped according to plan and silver soldered together. In image 6 the cross bar – valve assembly can be seen before the valves are finally inserted in the pump drums. As hinge bolts I used two 0.7mm nails (Scale Hardware) per hinge, cut to correct length, one bolt inserted from each side and glued together within the middle of the hinge hole in the cross bar. That probably was the most challenging part of the whole assembly . To insure correct and consistent length of the bolts I milled the thickness of a piece of aluminum to match the bolts’ length (image 7), inserted the bolts one after the other in a predrilled hole and cut and filed down the bolts to be flush with the metal surface. Images 8 and 9 show the assembled pump.
 
Thomas
 

Image 1
 

Image 2
 

Image 3
 

Image 4
 

Image 5
 

Image 6
 

Image 7
 

Image 8
 

Image 9