DocBlake Posted April 14, 2017 Author #211 Posted April 14, 2017 I completed and installed the rails, the catheads, the timberheads, the quarterdeck ladders and the timbers that define the gun ports. The only major parts left on the hull (except for cleats, eyebolts etc.) are the channels, the swivel gun mounts and the quarterdeck and poopdeck railings. The masts are done. Once the spars are made it's on to rigging. modlerbob, zoly99sask, coxswain and 9 others 12 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
DocBlake Posted April 18, 2017 Author #212 Posted April 18, 2017 I've got a question. Was the very top of the topmast ever painted/stained black on a ship from the colonial period? I photoshopped a picture of my masts to show what I'm talking about. I think the contrast would look good, but I'm not sure if this was ever done. coxswain, zoly99sask, mtaylor and 1 other 4 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
DocBlake Posted April 26, 2017 Author #213 Posted April 26, 2017 I have a few tasks left before moving on to the rigging. The masts, sprit, boom and gaffs are complete. I need to finish the yards. The plans call for the fore mast to have a topsail yard and a crossjack yard, but the main mast has no yards! Both Halifax and Sultana had both yards on both masts and I'm moving in that direction. On the hull I need to complete th quarter deck/poop deck rails, the channels and the swivel gun supports. I also need to add the head rails. I've been avoiding the whole head rail problem, because I can't find an easy solution to constructing them. The kit parts are crap (the scroll work on the stem is metal, again!), so I need to start from scratch. Since this is a fictional vessel I'm not bound by any convention in how I construct the rails. Is anyone aware of a good log or tutorial on constructing head rails from scratch? I can't bring myself to leave them off, because they really do help define these schooners, but I'm having trouble getting my head around how to construct them. GuntherMT 1 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
DocBlake Posted May 1, 2017 Author #214 Posted May 1, 2017 I spent the weekend working on the head rails. Since this is a small, simple vessel, I opted for simple head rails and no figure head. I dyed the rails black and applied a coat of poly. The glare of the light makes the rails look shiny. Much less so in real life. I really sweated the head rails, but I think they turned out OK. I just broke the whole thing down into individual parts and it wasn't as hard as I thought robnbill, modlerbob, Ryland Craze and 7 others 10 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
donrobinson Posted May 1, 2017 #215 Posted May 1, 2017 Those head rails look cool Dave, real nice work Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
DocBlake Posted June 12, 2017 Author #216 Posted June 12, 2017 I've been busy. We are replacing our cedar deck and we spent a week in California (the Bay area) since my last post. I haven't been doing a lot of modeling at all. I did want to rename this schooner "Clio" after the Muse of History in Greek mythology. My friend Mike Shanks was able to laser etch some ebony I had on hand. I then painted the etched name using white acrylic paint. Sanding the face with a 220 grit sanding block took care of any excess paint on the name plate. I then glued the name to the transom. Tigersteve, mrshanks, Landlubber Mike and 3 others 6 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
David Lester Posted June 13, 2017 #217 Posted June 13, 2017 Hi Dave, Your model is looking beautiful! David mrshanks and mtaylor 2 Quote Current Build - St. Roch, Billing Boats; HMS Agamemnon, Caldercraft (on hold) Previous Builds - Armed Virginia Sloop, Model Shipways; Constitution, Model Shipways; Rattlesnake, Mamoli; Virginia Privateer, Marine Model Co, restoration; Prince de Neufchatel, Model Shipways; Charles W. Morgan, Model Shipways; Pride of Baltimore II, Model Shipways, Bluenose, Model Shipways (x2); Niagara, Model Shipways; Mayfower, Model Shipways; Shamrock V, Amati; HMS Pegasus, Victory/Amati
S.Coleman Posted June 13, 2017 #218 Posted June 13, 2017 I have been following this build for sometime. It is very pleasing to see her taking shape beautifully. You have done a master job! mrshanks and mtaylor 2 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard
DocBlake Posted June 13, 2017 Author #219 Posted June 13, 2017 Thanks David and Scott! More to come. Next up are swiss pear deadeyes dyed black to simulate ebony. The channels will be boxwood with a molded edge. I'm also planning to add quarter badge windows of boxwood to contrast with the pear planking. Mike Shanks is instrumental in all of this. Stay tuned! mtaylor, Landlubber Mike and mrshanks 3 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
mrshanks Posted June 13, 2017 #220 Posted June 13, 2017 Coming along nicely Dave. The CLIO badge looks great. Your CNC cut deadeyes in swiss pear and laser cut windows in boxwood are on the way to you. Here is a couple pics to share with our other modeling friends. Quote Mike Shanks
donrobinson Posted June 13, 2017 #221 Posted June 13, 2017 Really looking forward to seeing this all come together!! Windows and deadeyes look awesome DocBlake, mtaylor and mrshanks 3 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
DocBlake Posted June 13, 2017 Author #222 Posted June 13, 2017 Thanks, Don! mtaylor and mrshanks 2 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
DocBlake Posted June 21, 2017 Author #223 Posted June 21, 2017 After a lot of thought I decided to include quarter badge windows. This is a small, simple ship so I opted out of all the elaborate carving and went with a simple 4 pane light that Mike Shanks cut out for me in boxwood. I took a cue from Dr. Clayton Feldman in his "Lexington" build and added a curved rain diverter and sill, both of which stand proud of the window. Simple molding strips form the sides of the framing. All these parts are of ebony. rafine, coxswain, mtaylor and 6 others 9 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
donrobinson Posted June 22, 2017 #224 Posted June 22, 2017 Windows look great Dave. The ebony trim really sets them off DocBlake and mrshanks 2 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
catopower Posted June 22, 2017 #225 Posted June 22, 2017 Hi Dave, I'm sorry I haven't been around much lately. But, I show up and see that your Colonial Schooner is looking terrific! Nice job on that hull planking! That lower hull looks slick. I like the contrasting color of the timberheads against the bulwarks too. Very fine job. I'm sorry I haven't been paying closer attention! Clare DocBlake, mrshanks and mtaylor 3 Quote Clare Hess He's a -> "HE" Current Builds HMS Wolf, 1754 - Shipyard Laser Cut Kit Kitamaebune - Japanese Coastal Trade Ship, 18th/19th Centuries - Woody Joe Kit Atakebune - Japanese Sengoku Period Warship - Woody Joe Kit
DocBlake Posted June 22, 2017 Author #226 Posted June 22, 2017 Thanks Don and Clare! Mike is experimenting with his laser and CNC router. Our plan is to build a 1/24 scale "Hannah" with CNC cut frame parts. Interesting stuff! Landlubber Mike, mtaylor, mrshanks and 1 other 4 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
donrobinson Posted June 22, 2017 #227 Posted June 22, 2017 Is that going to be a cross section or the full ship? She'll be a biggy . mrshanks, DocBlake and mtaylor 3 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
mrshanks Posted June 22, 2017 #228 Posted June 22, 2017 1 hour ago, donrobinson said: Is that going to be a cross section or the full ship? She'll be a biggy . Yes Don. LOL Quote Mike Shanks
DocBlake Posted June 22, 2017 Author #229 Posted June 22, 2017 Full ship, Don. She'll be big! Fully masted and rigged, about 50" long. Built admiralty style with stub masts and sprit, about 33" long! mtaylor, mrshanks and catopower 3 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
DocBlake Posted June 28, 2017 Author #230 Posted June 28, 2017 I needed deadeyes in an odd size because of the scale of the ship. I also wanted them black. 6mm would be 9" in scale diameter. That would work. Mike Shanks, using his CNC, cut a bunch of them out of swiss pear that are 6.5mm in diameter. The only problem is that there was no way to cut the grooves along the circumference. I did that by hand, and sanded the deadeyes smooth. Then I dyed them black. The photo shows the raw deadeyes and the finished product. they still need to be coated with tung oil. The second photo shows the remade deadeyes compared to the stock ones supplied with the kit. They are a bit bigger. Perfect! mtaylor, KenW, rafine and 5 others 8 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
mrshanks Posted June 28, 2017 #231 Posted June 28, 2017 I love it when a plan comes together!!!! Quote Mike Shanks
DocBlake Posted August 9, 2017 Author #232 Posted August 9, 2017 I took a little time to work on this build today . I'm using the rigging plans for "Halifax" so there three pair of shrouds per mast fixed to the channels rather than 4 as in the kit. The 4th shroud is secured to a cleat. I made the chainplates from 20 gauge copper wire doubled up and soldered together. After blackening, I'll drill holes for the nails that will hold the chainplates to the wales. The channels are made of boxwood, as is the chainplate cover strip. there's a decorative profile cut into the channels and the cover strip. Ryland Craze, GuntherMT, mrshanks and 7 others 10 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
donrobinson Posted August 10, 2017 #233 Posted August 10, 2017 The chain plates look good Dave. Do you use silver solder? mrshanks and mtaylor 2 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
DocBlake Posted August 10, 2017 Author #234 Posted August 10, 2017 Thanks, Don. No, just regular solder. Plenty strong. mtaylor 1 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
6ohiocav Posted August 10, 2017 #235 Posted August 10, 2017 Don, Your ship is exquisite. I especially love the name plate and deadeyes that Mike did. Isn't technology great. mtaylor and mrshanks 2 Quote Darrell Completed build - US Brig. Niagara http://modelshipworld.com/index.php/topic/13562-us-brig-niagara-by-6ohiocav-model-shipways-scale-164/
donrobinson Posted August 10, 2017 #236 Posted August 10, 2017 Thanks Dave. I was hoping you would say that, as that is what I use also and have had no problems yet. mtaylor and mrshanks 2 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
DocBlake Posted August 10, 2017 Author #237 Posted August 10, 2017 I glued the channels in place. I've read in a couple of sources that the stress on the channels by the shrouds is upward and inward. Knees were sometimes used to counter the forces, but were planed atop the channels rather than underneath. Here is a photo of Robert Bruckshaw's HMS Brittania with the knees on top. I cut out some boxwood knees and set them in place in the second photo. It IS a different look, but there is historical precedent, I guess. Anyone have comments? CharlieZardoz, popeye the sailor, KenW and 6 others 9 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
DocBlake Posted August 12, 2017 Author #238 Posted August 12, 2017 The chainplates were blackened and the deadeyes stropped. They were then mounted on the channels, with the chainplates nailed to the wales. The coverstrips, which cover the chainplates and "lock" them in place have not yet been added. Ryland Craze, Dubz, rafine and 13 others 16 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
rafine Posted August 13, 2017 #239 Posted August 13, 2017 She's looking great Dave. Bob zappto, mtaylor and popeye the sailor 3 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
donrobinson Posted August 13, 2017 #240 Posted August 13, 2017 I'm with Bob, she looks great popeye the sailor and mtaylor 2 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.