paulsutcliffe Posted July 31, 2019 #361 Posted July 31, 2019 Upper bit it needs to be cut into the moulding strip, and don't forget air/drainage holes at the backside Regards Paul The clerk of the cheque's yacht of sheerness Current build HMS Sirius (1797) 1:48 scratch POF from NMM plans HMS Winchelsea by chuck 1:48 Cutter cheerful by chuck 1:48 Previous builds- Elidir - Thames steam barge Cutty Sark-Billings boats Wasa - billings boats Among others 😁
CRI-CRI Posted August 1, 2019 Author #362 Posted August 1, 2019 Simulation of my first middle head-rail... Gahm, GrandpaPhil, schooner and 6 others 9
CRI-CRI Posted August 3, 2019 Author #363 Posted August 3, 2019 Visual photographic preparation for head-rails built... Haliburton, schooner, Sea Hoss and 7 others 10
CRI-CRI Posted August 5, 2019 Author #364 Posted August 5, 2019 Preparing next step... GrandpaPhil, paulsutcliffe, Peter Bloemendaal and 3 others 6
CRI-CRI Posted August 5, 2019 Author #365 Posted August 5, 2019 Fore-mast : my first installation of channels - The moulded and waxed rail cut is reserved for finition GrandpaPhil, tarbrush, Peter Bloemendaal and 7 others 10
CRI-CRI Posted August 5, 2019 Author #366 Posted August 5, 2019 Sunset smoothy light... Peter Bloemendaal, kier, GrandpaPhil and 10 others 13
CRI-CRI Posted August 6, 2019 Author #367 Posted August 6, 2019 The two fore-mast's channels are done... chris watton, bruce d, GrandpaPhil and 8 others 11
CRI-CRI Posted August 8, 2019 Author #368 Posted August 8, 2019 All channels this side glued - Next steps : same other side, then, all chain plates.... yvesvidal, Gahm, schooner and 6 others 9
CRI-CRI Posted August 9, 2019 Author #369 Posted August 9, 2019 All channels right side glued.... bruce d, Peter Bloemendaal, Javlin and 4 others 7
CRI-CRI Posted August 10, 2019 Author #370 Posted August 10, 2019 Today works... Peter Bloemendaal, bruce d, John Cheevers and 7 others 10
CRI-CRI Posted August 14, 2019 Author #371 Posted August 14, 2019 Channels done GrandpaPhil, Peter Bloemendaal, tarbrush and 5 others 8
CRI-CRI Posted August 15, 2019 Author #372 Posted August 15, 2019 Simplified chainplate's test bruce d, kier, tarbrush and 2 others 5
CRI-CRI Posted August 15, 2019 Author #373 Posted August 15, 2019 Last test... Javlin, GrandpaPhil, Peter Bloemendaal and 3 others 6
CRI-CRI Posted August 15, 2019 Author #374 Posted August 15, 2019 A new test for chainplate's fixation tarbrush, kier, Peter Bloemendaal and 1 other 4
CRI-CRI Posted August 18, 2019 Author #375 Posted August 18, 2019 A new chainplate's test... Peter Bloemendaal, oneslim, tarbrush and 3 others 6
CRI-CRI Posted August 20, 2019 Author #376 Posted August 20, 2019 Following tests about chainplates... GrandpaPhil, oneslim, tarbrush and 4 others 7
CRI-CRI Posted August 25, 2019 Author #377 Posted August 25, 2019 Good progress : second chainplate (only sixty-two to do...) 😛 GrandpaPhil, bruce d, Peter Bloemendaal and 3 others 6
CRI-CRI Posted August 27, 2019 Author #378 Posted August 27, 2019 Today works, following fore-mast's chainplates... oneslim, Captain Poison, Peter Bloemendaal and 6 others 9
CRI-CRI Posted September 2, 2019 Author #379 Posted September 2, 2019 On strike... J11, GrandpaPhil, Peter Bloemendaal and 1 other 4
CRI-CRI Posted September 3, 2019 Author #380 Posted September 3, 2019 End of strike... bruce d, Peter Bloemendaal, GrandpaPhil and 2 others 5
CRI-CRI Posted September 3, 2019 Author #381 Posted September 3, 2019 Side view of chainplates 1-6 with complete simulation... Peter Bloemendaal, GrandpaPhil, J11 and 3 others 6
CRI-CRI Posted September 4, 2019 Author #382 Posted September 4, 2019 Following chainplates (piano, ma sano... 😋 Beetween two modelling steps, for changing my ideas, I made this little arrangement of a well known composer : Sinfonia of Cantata BWV 29 (organ) GrandpaPhil, Tigersteve, Sea Hoss and 3 others 6
CRI-CRI Posted September 5, 2019 Author #383 Posted September 5, 2019 Today works on foremast's chainplates... GrandpaPhil, bruce d, Zarkon and 3 others 6
CRI-CRI Posted September 16, 2019 Author #384 Posted September 16, 2019 Fore mast's chainplates done... paulsutcliffe, Gahm, bruce d and 4 others 7
CRI-CRI Posted September 20, 2019 Author #385 Posted September 20, 2019 Chainplates before assemblage... My poor eyes...! GrandpaPhil, bruce d and Peter Bloemendaal 3
CRI-CRI Posted September 20, 2019 Author #386 Posted September 20, 2019 Here 34 / 64 chainplates done I've also tested different woods for display base of model (left to right last pic : Red pine, Teck and clear Oak) Jolley Roger, Ryland Craze, GrandpaPhil and 6 others 9
CRI-CRI Posted September 21, 2019 Author #387 Posted September 21, 2019 Today works... yvesvidal, Tigersteve, Zarkon and 11 others 14
CRI-CRI Posted September 22, 2019 Author #388 Posted September 22, 2019 All larboard's chainplates done (44 / 64) Next step : starboard's Main and Mizen masts (14 + 10 chainplates) Captain Poison, paulsutcliffe, GrandpaPhil and 7 others 10
Chuck Posted September 22, 2019 #389 Posted September 22, 2019 Looking really good. Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY
CRI-CRI Posted September 26, 2019 Author #390 Posted September 26, 2019 All sixty-four chainplates done... Tigersteve, GrandpaPhil, Captain Poison and 6 others 9
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now