Jump to content

HMS Winchelsea 1764 by Trussben - 1:48


Recommended Posts

5 hours ago, glbarlow said:

The all natural wood approach is bold and interesting. Well done!

I’m not sure about the “all natural” quote there Glenn, there is actually a lot more paint on this model than I like personally, but we all have to expand our horizons.

My Pegasus only has one color of paint on it, and I now wish I had done that in ebony wood.

 

ben

Link to comment
Share on other sites

Let’s just say it has less red than mine.

 

I built my Fair American by “painting with wood,” not a drop of paint on it, all variations of different woods. It was a fun project so I get it.  

Regards,

Glenn

 

Current Build: Don't know yet.
Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter CheerfulLady NelsonAmati HMS Vanguard,  
HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose

Link to comment
Share on other sites

Pushing forward into Chapter 11, I cleaned all of the channel pieces and glued the layers together and faired the backside to fit each location, I then added 1mm brass pins to each of them, 2 pins for the smaller ones and 3 pins for the longer ones.

The trim work was cut away and then holes in the hull drilled to suit the pin positions, then the channel was glued in place.

I just completed the port side and will get the other side done this week.

IMG_7072.thumb.jpeg.8b97652b7b358bebfe10092328147561.jpegIMG_7073.thumb.jpeg.d7af931c9b3d833c579d25e0d09f8965.jpegIMG_7074.thumb.jpeg.1857f99237a5541658e190ab0cdb002d.jpeg

 

 

Link to comment
Share on other sites

Halfway through Chapter 11, the gangways and their ladders along with newel posts and their fancy work is done.

The Chesstrees and fenders, with their friezes completed.

All of the Channels installed and I have started adding the channel straps, I looked at both boxwood or ebony deadeyes and I didn’t like the look of either so I have ordered some Swiss Pear deadeyes hoping they give the look that I want.

I have also made a decision about the swivel guns - I’m not going to install them or their mounts - not keen on how they look on finished models that I have seen sticking up and altering the flow of the model.

IMG_7120.thumb.jpeg.445a015677371cd86d1d24ed6e21cbb7.jpeg

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...