Javlin Posted June 15, 2020 Share #1 Posted June 15, 2020 I have commence on the Sabre this evening first thing in order was to remove the pore stubs from the moldings a bit of sanding on the tub that actually hit the sanding belt for 5/10minutes to get if close then another 15 minutes by hand it fits correctly level with the r/side of the fuse.The next order of business is to cut out the front console for newer one much more detailed and you can see how the back deck is much Nicer than the kit part oh and the seat blows the kit part away.The kit supplies the appropriate weight for the nose nice touch no guessing their on this one.The build is going to center on the pit and paint the engine is made like the old Hase were it can be separated paint some and glue it shut. Kevin Landlubber Mike, yvesvidal, popeye the sailor and 7 others 10 Quote Link to comment Share on other sites More sharing options...
Egilman Posted June 15, 2020 Share #2 Posted June 15, 2020 I'm in... I take it a BMF correct? Edwardkenway, popeye the sailor, Canute and 4 others 7 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Old Collingwood Posted June 15, 2020 Share #3 Posted June 15, 2020 I'm here also. OC. Canute, Javlin, Edwardkenway and 3 others 6 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Javlin Posted June 15, 2020 Author Share #4 Posted June 15, 2020 43 minutes ago, Egilman said: I'm in... I take it a BMF correct? Yes it will EG and I think I will use some of the Gloss Grey by Alclad over the Gloss Black of some panels and see the effect as discussed earlier in your thread I think Airframe Silver it's kinda bright. Canute, lmagna, mtaylor and 4 others 7 Quote Link to comment Share on other sites More sharing options...
mtaylor Posted June 15, 2020 Share #5 Posted June 15, 2020 Count me in also. Looks to be interesting. Edwardkenway, popeye the sailor, Egilman and 4 others 7 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
lmagna Posted June 15, 2020 Share #6 Posted June 15, 2020 Been needing a good old F86 build. Should be interesting. Canute, Javlin, Egilman and 4 others 7 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Jolley Roger Posted June 15, 2020 Share #7 Posted June 15, 2020 Yep, i'm in as well, my favorite piece of man made machinery ever! Hence my profile pic Egilman, Edwardkenway, Javlin and 4 others 7 Quote Samuel Pepys notes in his diary on 19 July 1667: "the Dutch fleets being in so many places, that Sir W. Batten at table cried, By God,says he, I think the Devil shits Dutchmen." Link to comment Share on other sites More sharing options...
Egilman Posted June 15, 2020 Share #8 Posted June 15, 2020 6 hours ago, Javlin said: Yes it will EG and I think I will use some of the Gloss Grey by Alclad over the Gloss Black of some panels and see the effect as discussed earlier in your thread I think Airframe Silver it's kinda bright. Excellent! The F-86 is a very attractive airplane in BMF..... I will enjoy this.... Edwardkenway, mtaylor, Javlin and 3 others 6 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Canute Posted June 15, 2020 Share #9 Posted June 15, 2020 I'm in too. Don't think they came in anything but BMF (unless you do it as a USN Fury). lmagna, mtaylor, Egilman and 3 others 6 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
popeye the sailor Posted June 16, 2020 Share #10 Posted June 16, 2020 neat project lmagna, Old Collingwood, Egilman and 2 others 5 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch Link to comment Share on other sites More sharing options...
Edwardkenway Posted June 20, 2020 Share #11 Posted June 20, 2020 Nearly missed it, I'm in! Egilman, popeye the sailor, lmagna and 3 others 6 Quote Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED Link to comment Share on other sites More sharing options...
Javlin Posted June 23, 2020 Author Share #12 Posted June 23, 2020 Guys I appreciate all the looks and interest but this build will be slowed not for lack of interest on my part but Life says other things first!I have officially run out of storage room I started a box some time back and I need to build another also for the office/model room it measures 48"LX22"D"X34"H plus I have a table restoration gig for fella graying included.So when I get an hour or two to work on the 86 I will but the F-16 gots to come first. Kevin popeye the sailor, Egilman, Landlubber Mike and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Egilman Posted June 23, 2020 Share #13 Posted June 23, 2020 Yeah, I'm going to have to do the same thing in the future, take a break from plastic for wood and glass... Probably after the Bandit is done.... Definitely need the space...... popeye the sailor, Canute, mtaylor and 4 others 7 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Javlin Posted August 15, 2020 Author Share #14 Posted August 15, 2020 I have not been totally idle guys I decided to have an OP procedure done was under about 3 hrs last Tuesday Rhinoplasty and one side of the nose was about 70/80% useless so said lets do it all,it sucks not being able to breathe.So,I wait on the glass for the cabinet but I decided before I progress Further with the F-86 I wanted to finish those kits that are 60/70/80% complete.Thus I have finished the F-16 1/48,HK B-25 1/32,F-84 1/72 and a old 1/32 Revell Hurricane next to hit the table is 1/48 MC-205 and 1/48 dorsal fin P-47 Revell.I have four other planes that need to be finished 1/24 FW-190 D-9,1/24 Spit Mk-V,1/32 P-47 and last may hit the trash a Revell 1/48 Mosquito. I have HK's 1/32 Mosquito Mk-IX/XVI coming in Monday.Some interesting builds out there guys. Kevin Edwardkenway, Egilman, Old Collingwood and 4 others 7 Quote Link to comment Share on other sites More sharing options...
popeye the sailor Posted August 15, 2020 Share #15 Posted August 15, 2020 get better my friend...........meanwhile.......are there any pictures? lmagna, mtaylor, Old Collingwood and 3 others 6 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch Link to comment Share on other sites More sharing options...
mtaylor Posted August 16, 2020 Share #16 Posted August 16, 2020 I hope the recovery and healing goes well and you breathe easier. Old Collingwood, Edwardkenway, popeye the sailor and 3 others 6 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Javlin Posted August 16, 2020 Author Share #17 Posted August 16, 2020 14 hours ago, popeye the sailor said: get better my friend...........meanwhile.......are there any pictures? I am taking pictures before and after Denis thinking of starting a thread "The Unfinished to Finished" something to that intent. 10 hours ago, mtaylor said: I hope the recovery and healing goes well and you breathe easier. I hope so Mark it's been a pain/pressure in the eyes,face is still swollen and you cannot blow or sneeze and it's full of blood and mucus.The issue of sleep is tough right now upright I was wondering why so many pain pills it's for the pressure behind the eyes I figure. Old Collingwood, mtaylor, popeye the sailor and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Canute Posted August 16, 2020 Share #18 Posted August 16, 2020 Things will definitely work better after it all heals up. Of course, right now you must look like Rocky Raccoon. Be well, brother. Javlin, Egilman, mtaylor and 4 others 7 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
Javlin Posted August 16, 2020 Author Share #19 Posted August 16, 2020 19 minutes ago, Canute said: Things will definitely work better after it all heals up. Of course, right now you must look like Rocky Raccoon. Be well, brother. Yep still puffy and dark around those eyes Old Collingwood, popeye the sailor, Canute and 4 others 7 Quote Link to comment Share on other sites More sharing options...
lmagna Posted August 16, 2020 Share #20 Posted August 16, 2020 Hope you recover fast Kevin. Sounds like a no fun condition to be in. They must be doing good work there in MS getting you in for surgery. I get to live on pain pills until late October before they can fit me in, if they don't close the hospitals again between now and then! Edwardkenway, Egilman, Canute and 3 others 6 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Javlin Posted August 16, 2020 Author Share #21 Posted August 16, 2020 38 minutes ago, lmagna said: Hope you recover fast Kevin. Sounds like a no fun condition to be in. They must be doing good work there in MS getting you in for surgery. I get to live on pain pills until late October before they can fit me in, if they don't close the hospitals again between now and then! Lou we have been open for the most part since late May we peaked like the rest of the states in mid-July but we stayed open we are now down to 750 cases per day from 1800 in July and today was 381 w/4deaths.The beaches have been packed,casinos and DINE in restaurants I see cars from LA,AL and FL on the W/E's we are open for business.I honestly think this hit the MS Gulf Coast from 11/19 onwards(casinos) and the reason why so few are showing symptoms now we called it the crud back then.The company I work for every store (15/40 employees) along the coast had people with pneumonia and flu like symptoms from Nov to March hence we have yet to have a store close and we are deemed essential business. popeye the sailor, Egilman, Edwardkenway and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Canute Posted August 16, 2020 Share #22 Posted August 16, 2020 Yep, what some folks might call elective surgery (not life threatening this minute) have been rolling along OK since early June, here in WNC. Old Collingwood, Egilman, mtaylor and 2 others 5 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
lmagna Posted August 17, 2020 Share #23 Posted August 17, 2020 Our elective, (Non life threatening) surgery operations opened back up a couple of months ago as well but apparently they are backed up to next year! I will still have to be tested a couple of days before surgery and can have no visitors, even family, while in the hospital. Not that anyone would want to come anyway. They will probably be at home having a party! popeye the sailor 1 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Old Collingwood Posted August 17, 2020 Share #24 Posted August 17, 2020 2 hours ago, lmagna said: Our elective, (Non life threatening) surgery operations opened back up a couple of months ago as well but apparently they are backed up to next year! I will still have to be tested a couple of days before surgery and can have no visitors, even family, while in the hospital. Not that anyone would want to come anyway. They will probably be at home having a party! Not gonna like that Lou, because I know you will be ok. OC. popeye the sailor, mtaylor and Canute 3 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Canute Posted August 17, 2020 Share #25 Posted August 17, 2020 Same here Lou. Can't like that. Old Collingwood, popeye the sailor and mtaylor 3 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
Egilman Posted August 17, 2020 Share #26 Posted August 17, 2020 11 hours ago, lmagna said: Our elective, (Non life threatening) surgery operations opened back up a couple of months ago as well but apparently they are backed up to next year! I will still have to be tested a couple of days before surgery and can have no visitors, even family, while in the hospital. Not that anyone would want to come anyway. They will probably be at home having a party! Yeah, our guv and his orders is a real peach.... (not too popular nowadays either) yesterday, I was thrown out of a Subway shop cause I didn't have a mask on.... I tried to show the lady my signed medical exemption, and she could have cared less, refused me service.... There are way to many absolutists in our society... what really gets me is two things... they way he keeps telling us that his micromanagements of every facet of our lives is good for us and we need to bear with it and that how this disease is an opportunity to advance the global warming agenda..... I think the state may go another way come this November.... Primary turnout was four times what it usually is.... and the opposition candidate is a real people/law n order type guy.... Coupled with the proven lies and manipulations I think it's going to get better in the future, I just wonder how bad it's going to get before we have the chance to fix it in november... Hang in there brother... My wife is in the same boat with you.... popeye the sailor, GrandpaPhil, marktiedens and 6 others 9 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Javlin Posted February 6, 2022 Author Share #27 Posted February 6, 2022 I am back on top of this one fellas already working should paint the pit this week researching the past research. Canute, Egilman, Old Collingwood and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Egilman Posted February 6, 2022 Share #28 Posted February 6, 2022 Still here Kevin... Canute, Old Collingwood, lmagna and 3 others 6 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Canute Posted February 6, 2022 Share #29 Posted February 6, 2022 Yep, still following this classic jet build. Egilman, Old Collingwood, popeye the sailor and 1 other 4 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
Danstream Posted February 6, 2022 Share #30 Posted February 6, 2022 (edited) One of the most graceful plane ever built, I will follow your 1/32 build. He must have seen some MiG-15 around? Edited February 6, 2022 by Danstream Javlin, mtaylor, Canute and 3 others 5 1 Quote Current build : Mayflower - AL 1:64 Completed non-ship builds : Spitfire MK I - 1:48, Arado 196B - 1:32, Sea Fury - 1:48, F-15C Eagle - 1:48, Hawker Tempest Mk.V - 1:48, F104S Starfighter - 1:48 "The most effective way to do it, is to do it" - Amelia Earhart Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.