Jump to content

Recommended Posts

Thank you, Carl !!!

 

And next step is ... OMG ... much more fragile ... bilge pump ....

 

This time, I really need magic wrand or any kind of spell to do this

 

Drawings I made in preparing to start

 

izazov.thumb.jpg.e92f9dbfcf57ccd1f31dd63eba6728d8.jpg

 

 

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Her Majesty is looking very majestic, Nenad. Great work. I am anxiously waiting to see how you will do these bilge pumps. The pumps themselves should be easy to produce with some short lengths of plastic tubing. Maybe some pieces of wire from a spare paper-clip to make the pistons. As for the fly-wheels ... that will require a lot of your skills. Might I suggest some small curtain hoops, with short lengths of wire shaped to make the spirals inner parts. I look forward to seeing your solution.

(NOTE: Here's where Ed Tosti made his flywheels.)

 

Edited by CaptainSteve

CaptainSteve
Current Build:  HM Granado Bomb Vessel (Caldercraft)

My BathTub:    Queen Anne Barge (Syren Ship Models)       Log:  Queen Anne Barge (an build log)

                        Bounty Launch (Model Shipways)                 Log:  Bounty Launch by CaptainSteve
                        Apostol Felipe (OcCre)
                        HMS Victory (Constructo)
Check It Out:   The Kit-Basher's Guide to The Galaxy

Website:          The Life & Boats of CaptainSteve

Link to comment
Share on other sites

Wonderful work, Nenad.  I can see what you mean about the pumps.  You're this far so I'm sure you can do the pumps.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

You can do it Nenad, with your inventive mind it'll be easy, ummm, kinda.

 

Cheers,

Piet, The Flying Dutchman.

 

"Your greatest asset is not the quantity of your friends , rather the quality of your friends."  (old Chinese proverb)

 

Current Builds: Hr. Ms. Java 1925-1942

                       VOC Ship Surabaya

 

Planned Builds: Young America Diorama - scale 1:3000

 

Future Builds: KPM ship "MS Musi."  Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp,  Buginese fishing Prauw.  Hr. Ms. Java - Royal Navy Netherlands Cruiser.

 

Completed Builds:   Hr. Ms. O16 Submarine

                             Hr. Ms. O19 - Submarine Royal Navy Netherlands

                             Ship Yard Diorama with Topsail schooner -

                             Friendship Sloop Gwenfra

                           Muscongus Bay Lobster Smack    

                             Golden Hind - Cutte Sark (both not in this forum)

Link to comment
Share on other sites

On 3/21/2019 at 10:35 PM, cog said:

good luck in finding the wand ... although, I don't know if you really need it

Hmm, Carl ... it seems to be ... as I ... if I ... delicate too much ... I have to do some experiment ... we`ll see

On 3/22/2019 at 5:08 AM, CaptainSteve said:

Her Majesty is looking very majestic, Nenad. Great work. I am anxiously waiting to see how you will do these bilge pumps. The pumps themselves should be easy to produce with some short lengths of plastic tubing. Maybe some pieces of wire from a spare paper-clip to make the pistons. As for the fly-wheels ... that will require a lot of your skills. Might I suggest some small curtain hoops, with short lengths of wire shaped to make the spirals inner parts. I look forward to seeing your solution.

(NOTE: Here's where Ed Tosti made his flywheels.)

 

 

Hey Cap! Main problem ... it is hard to understand if you do not live in Serbia ... spend money for adequate tools is ... very strong attack to home budget ... considering I have student who study in oather town, paying him flat and schollarship, sending him money for living ... I just have to do everything with tools I have now. To be honest, here i nestrbia, a very few people can finance student in other town without credits od borrowing money, so I am happy I can do it from my regular income, but ... nothing stays for other purposes. In Serbia, average net earning is about 300$ per month, I make over 3000$, and still can not by me fine machine tools. Yes, I follow Ed`s log, and mainly stay withouth breath 

On 3/22/2019 at 7:33 AM, mtaylor said:

Wonderful work, Nenad.  I can see what you mean about the pumps.  You're this far so I'm sure you can do the pumps.

Thank you for your kind words, Mark. And I am sure, too :huh::o:D

14 hours ago, Piet said:

You can do it Nenad, with your inventive mind it'll be easy, ummm, kinda.

 

Cheers,

 

Hello, piet, thank you for your supporting words

 

So ...

 

My crazy brain do not sleep, and here is first attepmt, just to get feeling about dimensions and material

I am not satisfied, so show goes on

 

55802433_10209934916768883_3282251794725470208_n.thumb.jpg.ef16902a952311613b955e03e120b853.jpg


See you one of this days

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Better, and it seems to be final solution15536269515022094806392040241556.thumb.jpg.a76cae7617a17897a2a391ff9df91659.jpg255075031_IMG_20190326_1955152.thumb.jpg.ada117bba608a105fa7b218861ce38bd.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Bilge pump - done.

I think this is important point. With this one, I finished all complex structures on main deck, so ...  only just a "few" easier parts to be made, and I get significant closer to masts spars sails and ropes

 

IMG_20190329_201520.thumb.jpg.e4e5c160e583eb5fce19c2e3b6a6f8cc.jpgIMG_20190329_203839.thumb.jpg.044dc17d9f53748bf041448dbd680b31.jpgIMG_20190329_203807.thumb.jpg.8f0e807190b16cecaae8e2273b8bb392.jpgIMG_20190329_203719.thumb.jpg.eabb0db77200f1c8d86b76a28ec2b490.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Amazing work, my friend.   So tiny yet has lots of detail.  

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

11 minutes ago, mtaylor said:

Amazing work, my friend.   So tiny yet has lots of detail.  

Thank you very much, Mark!

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

That looks great, Nenad !!

CaptainSteve
Current Build:  HM Granado Bomb Vessel (Caldercraft)

My BathTub:    Queen Anne Barge (Syren Ship Models)       Log:  Queen Anne Barge (an build log)

                        Bounty Launch (Model Shipways)                 Log:  Bounty Launch by CaptainSteve
                        Apostol Felipe (OcCre)
                        HMS Victory (Constructo)
Check It Out:   The Kit-Basher's Guide to The Galaxy

Website:          The Life & Boats of CaptainSteve

Link to comment
Share on other sites

And now, Fife Rails

Two over main mast are equial, but front one is differen

For now, just preparing

FB_IMG_1554320265416.thumb.jpg.a1ded6719413d4ff381744c4cc05da62.jpg

 

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

So, let it be ...IMG_20190404_204606.thumb.jpg.5f94f8cb31a96a1745836cafd184fef8.jpgIMG_20190404_204652.thumb.jpg.5c265e7bea6b63d9fc0ad323cbdfeb7a.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

the winches and pump look great Nenad!   I see your take on the fife rails is spot on as well  ;)   very well done!

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

5 minutes ago, popeye the sailor said:

the winches and pump look great Nenad!   I see your take on the fife rails is spot on as well  ;)   very well done!

Thank you, Denis. Repetitio is mater studiorum (lat) :D

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Attempt No 1

Overact ?Photo_1554838457746.thumb.jpg.07d9723a012f70e3cc2a078e925901c7.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Link to comment
Share on other sites

Thank you Igor

Litle break, during bussines trip to little town in middle Serbia, visitting Monastery Ravanica (XIV century) and Museum of coal and mining in Senj

Enjoy

 

IMG_20190408_110732.thumb.jpg.43f8e1554b8c72571a92593b49d4374e.jpgIMG_20190408_111740.thumb.jpg.1ebb5581f53b2c6b8474da8e02660435.jpgIMG_20190408_103343.thumb.jpg.6da7410bf4496ea0c71bbd3183c0ea46.jpgIMG_20190408_104021.thumb.jpg.02ee6e83245b71ebd9c168a8298e7f0b.jpgIMG_20190408_104521.thumb.jpg.d4f3c0e0ae94278aa72b17c96af6fe9a.jpg

 

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

On 4/11/2019 at 1:19 PM, cog said:

... interesting drill to get to the coal

This was grandfather

And this is grandsonWorlds-largest-tunnel-boring-machine.png.b887c849f272ad33f0d8abbcd95a2c4c.png

 

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Two more to go

If those two I would make better, I'll repeat this one

 

1321880184_Screenshot_20190412-2042032.thumb.png.a4032fa7c737a031ba8bbd1c711c25e8.png1708198601_Screenshot_20190412-2041502.thumb.png.590a09d1d8c60469b9bf82bed92ff279.png153982583_Screenshot_20190412-2041322.thumb.png.903eff3a55f84625a17fd5d29e9164c1.png2061209311_Screenshot_20190412-2041192.thumb.png.c43e46d3d1d86d2784fc08ccd0447589.png

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Grandson must be on a diet, he has been spoiled by grandma!!

 

I have to warn you, you shall probably do better, as practice makes perfect. So maybe you will make all three multiple times ...

Carl

"Desperate affairs require desperate measures." Lord Nelson
Search and you might find a log ...

 

Link to comment
Share on other sites

And finally ...IMG_20190417_125540.thumb.jpg.6d6d5ca8c35587f68c4ca4de2bca6c3d.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Very nice, Nenad ... you'll LOVE it !!

:D:D

CaptainSteve
Current Build:  HM Granado Bomb Vessel (Caldercraft)

My BathTub:    Queen Anne Barge (Syren Ship Models)       Log:  Queen Anne Barge (an build log)

                        Bounty Launch (Model Shipways)                 Log:  Bounty Launch by CaptainSteve
                        Apostol Felipe (OcCre)
                        HMS Victory (Constructo)
Check It Out:   The Kit-Basher's Guide to The Galaxy

Website:          The Life & Boats of CaptainSteve

Link to comment
Share on other sites

Congratulations on the tool, Nenad.   As the others have said: "I think you will love it".   

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...