Jump to content

Recommended Posts

Transmission's probably OK Nenad. The parts in the picture are the clutch-disc and pressure-plate. Just replace those, the thrust-bearing, and adjust the clutch properly, you should be fine.  I've fixed many in my time. Trust me. B)  Unless you heard a lot of grinding or banging, the transmission should be fine. 

GEORGE

 

MgrHa7Z.gif

 

Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn.

 

Member of the Nautical Research Guild

Link to comment
Share on other sites

You are right George ... My English again ... And stuppid google translate do not recognize serbian words "kvačilo" "korpa" and "lamela". Transmision ( in serbian " menjač" litteraly - changer) is still perfect, soft, precise, and considering I drive soft, do not force car over 3000-3500 rounds and not burn engine, it will last long

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Good wishes on the repairs.  Clutch work on some cars is easy, others with front wheel drive, not so easy.  If it's a good service shop, you'll get good work at a fair price. 

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Licensed Renault service, Mark. They are really good, and as their customer for 10 years I have got discount. Adding some servo repairs, down engine holder, some major fittings, some details on wheel mechanism, new oil in motor and transmission, new liquids, new filters, all finished with 300€. Not much, but in Serbia this is full month income for someone ...

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Deck house No2, side No1, phase No1

post-4738-0-75577000-1446228633_thumb.jpg

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Thx Omega

I have been pretty bussy last days with office jobs, even for a weekend, because my court schedulle was full every day, and I had to finish some urgent paper works. But, in Serbia this not mean - money. Ok, there will be some, but not spectacular. As we said - you can not undress a nude one. People are poor, and we have to turn down our prices, if we want to keep our clients

However, tonight I found some time to continue, and here is side two, step by step. Maybe it will be usefull for somebody



post-4738-0-67419100-1446497785_thumb.jpg

You can notice that this four panels are made from un-thinned veneer. It is impossible to drill those half circles on thinned veneer I used for strips. Thinning came later after glueing

post-4738-0-83614800-1446497827_thumb.jpg

post-4738-0-16062600-1446497861_thumb.jpg

post-4738-0-76555700-1446497893_thumb.jpg

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Four long days I was not in shipyard

Today Her crying and calling was too loud to hear it any more, so, it is Friday, and as I have to work in office by weekend, at Friday night I pronounced "hobby hours" and continued with second deck house

Interesting ... When you know what you are doing, and when you have plan, it goes pretty fast

And stage 1 was done

post-4738-0-52478400-1446842345_thumb.jpg

post-4738-0-57568600-1446842379_thumb.jpg

post-4738-0-35673000-1446842412_thumb.jpg

You can notice that rounded corners of ornaments are a bit lower than in plan (cca 1mm). Reason - to let them to be seen under roof from distance. If I make them in scale, those nice semi circles would be covered by outside roof moulding

Next time, fine trimming and painting, and after that - aftdeck house. All "roofs" will be planked at the same time, to have equial look from bird perspective

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Outstanding Nenad, looking very good.  Sorry for the many hours of work but that'll keep you in plenty of groceries  ;)

 

Cheers,

Piet, The Flying Dutchman.

 

"Your greatest asset is not the quantity of your friends , rather the quality of your friends."  (old Chinese proverb)

 

Current Builds: Hr. Ms. Java 1925-1942

                       VOC Ship Surabaya

 

Planned Builds: Young America Diorama - scale 1:3000

 

Future Builds: KPM ship "MS Musi."  Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp,  Buginese fishing Prauw.  Hr. Ms. Java - Royal Navy Netherlands Cruiser.

 

Completed Builds:   Hr. Ms. O16 Submarine

                             Hr. Ms. O19 - Submarine Royal Navy Netherlands

                             Ship Yard Diorama with Topsail schooner -

                             Friendship Sloop Gwenfra

                           Muscongus Bay Lobster Smack    

                             Golden Hind - Cutte Sark (both not in this forum)

Link to comment
Share on other sites

Nice going on the deckhouse, Nenad.  Sadly, work has to come first to pay the bills, etc.  

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

post-4738-0-73191900-1446927114_thumb.jpg



Second main deck house - done

I am satisfied with same look and feel of both deck houses

post-4738-0-13529200-1446927272_thumb.jpg

post-4738-0-05307500-1446927367_thumb.jpg

post-4738-0-23364800-1446927665_thumb.jpg

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Thanks George. I walked a long path until I find a way how to made something which match with my idea how it has to look

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Well done, Nenad.  Those houses will make Her Majesty proud.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Well done, Nenad.  Those houses will make Her Majesty proud.

 

Thanks Mark, them make me proud too ... there is still a time and chance to screw it up ...  ;)  :P

 

 

Hi Nenad

 

They look like the real deal!

 

Nicely done.

 

Patrick

 

 

Thaks Partick for nice words.

 

As I wrote up,  there are a lot of icy places to slip down.

 

Didn`t work on Her, reason is in this post 

 

http://modelshipworld.com/index.php/topic/4435-the-what-have-you-done-today-thread/page-67#entry361413

 

Finishing playing with GSketchUp, I returned to AI to check cabin curvature for aft deck house, and .... hmm again

 

Maybe .... or maybe not

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Aft deck house - main structure done.

Tomorrow I plan to start with ornaments, relief panels and another stuff which belongs here

New modeler law I discovered today: so smaller piece, that bigger challenge is

It didn't look to be small as it is, during drawing in AIlustrator. Particulary skylight.

post-4738-0-49249900-1447096326_thumb.jpg

post-4738-0-73153300-1447096365_thumb.jpg

post-4738-0-06804300-1447096393_thumb.jpg

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

 

New modeler law I discovered today: so smaller piece, that bigger challenge is

Ah! Nenad you have discovered why I work in 1:8 and not 1:92... it is much easier.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Hello Michael. More easier is to work in 1:1 ;)

Just to add picture of six "windows" on each panel of skylight I plan to make ;)


When I find how


post-4738-0-25529100-1447097838_thumb.jpg


What is a cooked cow head for a cat to eat?

And where is the problem with deck planks less than 2mm wide?

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Nenad that looks like a great challenge, perhaps you can do something along the lines of what Dan did on the funnel like this

 

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Wow, Michael, what a brilliant idea !

 

I have somewhere cannibalized electronic transformer, winding very thin wires, etc, and must dig in my workshop to find it and to try

 

Maybe I`ll try with 0,1mm fishing line which left from my fishing days ...

 

Thanks a lot !!!! 

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Windows, testing

post-4738-0-66298200-1447180202_thumb.jpg

On place

post-4738-0-74608400-1447180251_thumb.jpg

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Step forward


post-4738-0-88355100-1447356021_thumb.jpg

post-4738-0-59974500-1447356067_thumb.jpg

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Looks great Nenad!  What did you use for the round portholes? 

 

Cheers,

Piet, The Flying Dutchman.

 

"Your greatest asset is not the quantity of your friends , rather the quality of your friends."  (old Chinese proverb)

 

Current Builds: Hr. Ms. Java 1925-1942

                       VOC Ship Surabaya

 

Planned Builds: Young America Diorama - scale 1:3000

 

Future Builds: KPM ship "MS Musi."  Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp,  Buginese fishing Prauw.  Hr. Ms. Java - Royal Navy Netherlands Cruiser.

 

Completed Builds:   Hr. Ms. O16 Submarine

                             Hr. Ms. O19 - Submarine Royal Navy Netherlands

                             Ship Yard Diorama with Topsail schooner -

                             Friendship Sloop Gwenfra

                           Muscongus Bay Lobster Smack    

                             Golden Hind - Cutte Sark (both not in this forum)

Link to comment
Share on other sites

Looks great Nenad! What did you use for the round portholes?

 

Cheers,

 

 

My favourite - Cu wire 0,5 mm

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Congratulations on another project Nenad.  How did you make the portholes inquiring minds want to know.

David B

Link to comment
Share on other sites

How did you make the portholes inquiring minds want to know.

 

 

 

 

Hello David

 

Just a improvisation - lazy and impatient Nenad. It can be done much much better with brass wire and a bit of soldering

 

Here is "the last technology" process

 

post-4738-0-10089700-1447402159_thumb.jpg

 

I hope you can manage in my fast hand drawing

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...