KORTES Posted August 23, 2021 Share #1 Posted August 23, 2021 Greetings , my dear Colleagues. I've decided to show my work on brig. I have been thinking on building this shipper quite some time. I've found it on the web site and wanted to have one. This is a sistership Le Cynge. I'm building it using the blueprints of the last one because they are practically twins. The scale is М 1: 55 , I've chosen this scale so the ship would fit in the apartment. Although I'm not completely sure that I would be able to build such a small one. I'm planning on using pear tree and painted hornbeam. I will use the excellent works of others Masters. piter56, mtaylor and GrandpaPhil 3 Quote Link to comment Share on other sites More sharing options...
KORTES Posted August 23, 2021 Author Share #2 Posted August 23, 2021 The hull of the ship was made using the familiar technology. As a basis I was using 8mm plywood glued from two pieces. muratx, archjofo, bruce d and 6 others 9 Quote Link to comment Share on other sites More sharing options...
KORTES Posted August 23, 2021 Author Share #3 Posted August 23, 2021 (edited) I ve made a temporary slip way. Unfastened the frames. Edited August 23, 2021 by KORTES archjofo, mtaylor, FriedClams and 6 others 9 Quote Link to comment Share on other sites More sharing options...
KORTES Posted August 23, 2021 Author Share #4 Posted August 23, 2021 (edited) 3 minutes ago, KORTES said: And I've made the nose of the ship. Edited August 23, 2021 by KORTES Ondras71, piter56, mtaylor and 7 others 10 Quote Link to comment Share on other sites More sharing options...
KORTES Posted August 23, 2021 Author Share #5 Posted August 23, 2021 The first layer of the primary covering. Valeriy V, shipman, muratx and 8 others 11 Quote Link to comment Share on other sites More sharing options...
KORTES Posted August 24, 2021 Author Share #6 Posted August 24, 2021 The second layer. Ondras71, ccoyle, Valeriy V and 10 others 12 1 Quote Link to comment Share on other sites More sharing options...
KORTES Posted August 24, 2021 Author Share #7 Posted August 24, 2021 Covering of the boards. Ondras71, piter56, JpR62 and 7 others 10 Quote Link to comment Share on other sites More sharing options...
KORTES Posted August 26, 2021 Author Share #8 Posted August 26, 2021 (edited) I have readjusted the boards. Edited August 26, 2021 by KORTES CiscoH, Valeriy V, archjofo and 9 others 12 Quote Link to comment Share on other sites More sharing options...
KORTES Posted August 29, 2021 Author Share #9 Posted August 29, 2021 The stern. I had to remake it two times. JpR62, Valeriy V, piter56 and 6 others 9 Quote Link to comment Share on other sites More sharing options...
KORTES Posted August 31, 2021 Author Share #10 Posted August 31, 2021 Preliminary deck plating. mtaylor, muratx, GrandpaPhil and 7 others 10 Quote Link to comment Share on other sites More sharing options...
KORTES Posted August 31, 2021 Author Share #11 Posted August 31, 2021 I've adjusted the height of the side of the ship. Valeriy V, archjofo, mtaylor and 9 others 12 Quote Link to comment Share on other sites More sharing options...
KORTES Posted September 6, 2021 Author Share #12 Posted September 6, 2021 Preliminary markup. JpR62, piter56, Valeriy V and 5 others 8 Quote Link to comment Share on other sites More sharing options...
KORTES Posted September 6, 2021 Author Share #13 Posted September 6, 2021 I bought a painted hornbeam. Now I will have a stock. archjofo, bruce d, piter56 and 3 others 6 Quote Link to comment Share on other sites More sharing options...
KORTES Posted September 6, 2021 Author Share #14 Posted September 6, 2021 Completed the inset of gun ports. Although I had to remake it afterwards. But everything is fixable, the strength of the case allows to remake it. archjofo, shipman, JpR62 and 6 others 9 Quote Link to comment Share on other sites More sharing options...
KORTES Posted September 6, 2021 Author Share #15 Posted September 6, 2021 Performed inset rowing ports Siggi52, piter56, GrandpaPhil and 8 others 11 Quote Link to comment Share on other sites More sharing options...
KORTES Posted September 18, 2021 Author Share #16 Posted September 18, 2021 Preliminary works before decking VTHokiEE, Valeriy V, archjofo and 12 others 15 Quote Link to comment Share on other sites More sharing options...
bruce d Posted September 18, 2021 Share #17 Posted September 18, 2021 I am catching up on your progress. Looking good! mtaylor 1 Quote 🌻 STAY SAFE A model shipwright and an amateur historian are heads & tails of the same coin current builds: HMS Berwick 1775, 1/192 scratchbuild; a Slade 74 in the Navy Board style Mediator sloop, 1/48 - an 18th century transport scratchbuild French longboat - CAF - 1/48, on hold Link to comment Share on other sites More sharing options...
KORTES Posted September 27, 2021 Author Share #18 Posted September 27, 2021 Deck planking. I have made it in several versions. I'm showing the final one. Tony Hunt, archjofo, JpR62 and 12 others 15 Quote Link to comment Share on other sites More sharing options...
rlb Posted September 27, 2021 Share #19 Posted September 27, 2021 This ship will be beautiful. Thank you. Ron mtaylor 1 Quote Building: US Brig Oneida (1809) HMS Euryalus (1803) Completed: John Alden Sloop Link to comment Share on other sites More sharing options...
archjofo Posted September 29, 2021 Share #20 Posted September 29, 2021 Hello, a solidly built hull is the best condition for a wonderful model. And it certainly will be! mtaylor 1 Quote Best regards Johann Video: La Créole - Scale 1/48, French corvette of 1827 - naval artillery La Créole - Scale 1/48, French corvette - Construction of long boat La Créole - Scale 1/48, French corvette - Construction of the masts La Créole - Scale 1/48, French corvette - 2019 La Créole - Scale 1/48, French corvette - standing rigging - part 1 La Créole - Scale 1/48, French corvette - standing rigging - part 2 La Créole - Scale 1/48, French corvette - standing rigging - part 3 See also our german forum for Sailing Ship Modeling and History: www.segelschiffsmodellbau.com Link to comment Share on other sites More sharing options...
KORTES Posted October 3, 2021 Author Share #21 Posted October 3, 2021 Thank you , dear colleagues, for your feedback. My best regards mtaylor 1 Quote Link to comment Share on other sites More sharing options...
KORTES Posted October 3, 2021 Author Share #22 Posted October 3, 2021 I have finished the side plating. shipman, muratx, archjofo and 7 others 10 Quote Link to comment Share on other sites More sharing options...
KORTES Posted October 3, 2021 Author Share #23 Posted October 3, 2021 I bought a yellow hornbeam for covering the outer side. Let's see how it looks. shipman, GrandpaPhil, archjofo and 9 others 12 Quote Link to comment Share on other sites More sharing options...
KORTES Posted October 9, 2021 Author Share #24 Posted October 9, 2021 I made a simple template for marking oared ports. mtaylor, Valeriy V, muratx and 7 others 10 Quote Link to comment Share on other sites More sharing options...
KORTES Posted October 9, 2021 Author Share #25 Posted October 9, 2021 I made blanks for making the imitation of blocks embedded in the board, I will refine them in the future. piter56, JpR62, muratx and 8 others 11 Quote Link to comment Share on other sites More sharing options...
KORTES Posted November 20, 2021 Author Share #26 Posted November 20, 2021 I have sheathed the inside and outside of the stern. Valeriy V, JpR62, bruce d and 8 others 11 Quote Link to comment Share on other sites More sharing options...
KORTES Posted November 21, 2021 Author Share #27 Posted November 21, 2021 Now it's done , but I haven't installed a lump decor yet. I decided not to cut it, but tried to make it from several parts instead . FriedClams, Valeriy V, G.L. and 21 others 18 6 Quote Link to comment Share on other sites More sharing options...
bdgiantman2 Posted November 23, 2021 Share #28 Posted November 23, 2021 Sneeeeeaky! Veeeeeerrrry Sneaky! I like how this turned out though, a creative way to solve those decoration pieces. Great job on this ship model. shipman, Keith Black and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
KORTES Posted November 24, 2021 Author Share #29 Posted November 24, 2021 I have begun to carry out the finishing of the hull. Its the first time that I do it with a combination of two colors - black hornbeam and pear. Keith Black, JpR62, garyshipwright and 13 others 16 Quote Link to comment Share on other sites More sharing options...
FriedClams Posted November 25, 2021 Share #30 Posted November 25, 2021 I’m so glad to see you working on a new project Alexander. Your La Jacinthe is such a beautiful model and your build log of it was educational and very inspirational. I know this new build is also going to be excellent and I look forward to watching you bring it life. And what a great start! Gary Keith Black and mtaylor 2 Quote Current Build Pelican Eastern-Rig Dragger Completed Scratch Builds Rangeley Guide Boat New England Stonington Dragger 1940 Auto Repair Shop Mack FK Shadowbox Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.