KORTES Posted December 20, 2023 Author #151 Posted December 20, 2023 While the oil is drying out, I decided to start with the boat and longboat. I made two “pieces” and now deciding which manufacturing method to choose. BETAQDAVE, FriedClams, CiscoH and 11 others 13 1 Quote
KORTES Posted January 31 Author #152 Posted January 31 The first option went to the trash can. The form seems to be sheathed well, but it’s impossible to remove the shell. Something hasn’t been done fully probably. Apparently I will have to remake the form, and make it from three parts that can be disassembled. Keith Black, scrubbyj427, Paul Le Wol and 6 others 9 Quote
KORTES Posted January 31 Author #153 Posted January 31 I made a technological mistake and here is the result. I will have to try again.🙂 Meanwhile I am tuning the Proxxon circular saw, a gift for the New Year. Some components are very crude and require some changes. My best regards mtaylor, archjofo, rlb and 7 others 6 4 Quote
CiscoH Posted February 1 #154 Posted February 1 hope you can re-use some of the planks Kortes mtaylor, Keith Black, FriedClams and 1 other 4 Quote
KORTES Posted February 1 Author #155 Posted February 1 I went back to the old technology. And got the expected result. Now the filling has to be done. FriedClams, rlb, mtaylor and 11 others 13 1 Quote
KORTES Posted February 1 Author #156 Posted February 1 19 hours ago, CiscoH said: hope you can re-use some of the planks Kortes Unfortunately I couldnt use the boards the second time. Maybe they will come in handy for the covering of a small lifeboat. CiscoH, Paul Le Wol, Keith Black and 1 other 4 Quote
FriedClams Posted February 13 #157 Posted February 13 Sad to see your first effort go to the trash bin, especially as you planked it so beautifully. But your old method produced a very fine boat. Very nice work, Alexander. Gary KORTES, Keith Black and mtaylor 2 1 Quote Current Build Pelican Eastern-Rig Dragger Completed Scratch Builds Rangeley Guide Boat New England Stonington Dragger 1940 Auto Repair Shop Mack FK Shadowbox
KORTES Posted February 22 Author #158 Posted February 22 Basically, I have finished the longboat. I don’t see the point in further detalisation. There will anyway be a boat on top. I didn’t do the the rudder as well, because I don’t have to install it anyway. All that’s left is to cover it with oil. Paul Le Wol, Stavanger, rlb and 12 others 13 2 Quote
KORTES Posted March 9 Author #159 Posted March 9 The oil has dried out. Color in natural light. JpR62, rlb, archjofo and 13 others 15 1 Quote
BETAQDAVE Posted March 9 #160 Posted March 9 On 2/25/2023 at 2:52 AM, KORTES said: I decided to change the covers of the ports . That's a very remarkable improvement on such a small detail! KORTES, mtaylor, FriedClams and 1 other 3 1 Quote Dave “You’ve just got to know your limitations” Dirty Harry Current Builds: Modified MS 1/8” scale Phantom, and modified plastic/wood hybrid of Aurora 1:87 scale whaling bark Wanderer. Past Builds: (Done & sold) 1/8” scale A.J. Fisher 2 mast schooner Challenge, 1/6” scale scratch built whaler Wanderer w/ plans & fittings from A.J. Fisher, and numerous plastic kits including 1/8” scale Revell U.S.S. Constitution (twice), Cutty Sark, and Mayflower. (Done & in dry dock) Modified 1/8” scale Revell U.S.S. Constitution w/ wooden deck and masting [too close encounter w/conc. floor in move] Hope to get to builds: MS 3/16” scale Pride of Baltimore II, MS 1/2” scale pinky schooner Glad Tidings, a scratch build 3/16” scale Phantom, and a scratch build 3/16" scale Denis Sullivan.
BETAQDAVE Posted March 9 #161 Posted March 9 On 7/10/2023 at 1:25 PM, KORTES said: I also have great respect for hand crafts, but when you need to cut several identical elements by hand, it's quite stressful. That is probably true, but it just makes your results just that much more remarkable! My paternal grandfather was also very good at carving by hand back in the depression with his own handmade tools. I was always impressed by how he could create such beautiful sculptures and furniture from the most basic tools and scraps of lumber that he could get a hold of. I think that's who I inherited my urge to recycle rather than replace from. mtaylor, Keith Black, FriedClams and 1 other 3 1 Quote Dave “You’ve just got to know your limitations” Dirty Harry Current Builds: Modified MS 1/8” scale Phantom, and modified plastic/wood hybrid of Aurora 1:87 scale whaling bark Wanderer. Past Builds: (Done & sold) 1/8” scale A.J. Fisher 2 mast schooner Challenge, 1/6” scale scratch built whaler Wanderer w/ plans & fittings from A.J. Fisher, and numerous plastic kits including 1/8” scale Revell U.S.S. Constitution (twice), Cutty Sark, and Mayflower. (Done & in dry dock) Modified 1/8” scale Revell U.S.S. Constitution w/ wooden deck and masting [too close encounter w/conc. floor in move] Hope to get to builds: MS 3/16” scale Pride of Baltimore II, MS 1/2” scale pinky schooner Glad Tidings, a scratch build 3/16” scale Phantom, and a scratch build 3/16" scale Denis Sullivan.
FriedClams Posted March 11 #162 Posted March 11 Rich, warm color and so precisely built - beautiful, Alexander! Gary Keith Black, KORTES and mtaylor 2 1 Quote Current Build Pelican Eastern-Rig Dragger Completed Scratch Builds Rangeley Guide Boat New England Stonington Dragger 1940 Auto Repair Shop Mack FK Shadowbox
KORTES Posted April 28 Author #163 Posted April 28 In general I have completed work on the small boat. On the drawing it comes without metal fastenings for the mast, after some thought I decided to do it as on the drawing. What is left to do is to cover it with oil, make two slipways and install it inside the longboat. DonSangria, BETAQDAVE, Keith Black and 15 others 17 1 Quote
KORTES Posted May 8 Author #164 Posted May 8 I have coated the boat with oil and made a slipway. Once assembled, it turned out to look like this. Macro photography revealed some disadvantages, but in the future I will eliminate them. tlevine, davyboy, rlb and 13 others 13 3 Quote
Keith Black Posted May 8 #165 Posted May 8 Beautiful ship's boats, Alexander. KORTES, FriedClams, mtaylor and 1 other 3 1 Quote Current Builds: 1870's Sternwheeler, Lula Wood Hull Screw Frigate USS Tennessee Decorative Carrack Warship Restoration, the Amelia Completed: 1880s Floating Steam Donkey Pile Driver Early Swift 1805 Model Restoration
KORTES Posted June 29 Author #166 Posted June 29 Lately , i dont have much free time. The work on the shipyard is going slow. Several shots of the work on the carronade carriage. CiscoH, tlevine, davyboy and 7 others 10 Quote
KORTES Posted June 29 Author #167 Posted June 29 I need to blacken the metal and assemble.The carronades will have to be refined due to some mistakes in dimensions. scrubbyj427, CiscoH, tlevine and 14 others 14 3 Quote
FriedClams Posted June 30 #168 Posted June 30 Thoughtful process for identical copies. Your carronades are coming along nicely, Alexander! Gary mtaylor, Keith Black, KORTES and 1 other 3 1 Quote Current Build Pelican Eastern-Rig Dragger Completed Scratch Builds Rangeley Guide Boat New England Stonington Dragger 1940 Auto Repair Shop Mack FK Shadowbox
KORTES Posted August 2 Author #169 Posted August 2 Unfortunately, I got the artillery with a shortage, there were no trunnions for the carronades. I had to make it myself. The main difficulty was producing a large number of identical parts. Since I don’t have enough metalworking equipment, I had to use wood.I made it from black hornbeam which took me some attemps. I deliberately made it simplified, on my scale and with my “machinery park” - I think this is acceptable. JpR62, tlevine, BETAQDAVE and 4 others 7 Quote
KORTES Posted August 2 Author #170 Posted August 2 Its just a fitting at this step. tlevine, JpR62, BETAQDAVE and 10 others 13 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.