KORTES Posted December 20, 2023 Author Share #151 Posted December 20, 2023 While the oil is drying out, I decided to start with the boat and longboat. I made two “pieces” and now deciding which manufacturing method to choose. rlb, mtaylor, Keith Black and 11 others 13 1 Quote Link to comment Share on other sites More sharing options...
KORTES Posted January 31 Author Share #152 Posted January 31 The first option went to the trash can. The form seems to be sheathed well, but it’s impossible to remove the shell. Something hasn’t been done fully probably. Apparently I will have to remake the form, and make it from three parts that can be disassembled. CiscoH, FriedClams, Paul Le Wol and 6 others 9 Quote Link to comment Share on other sites More sharing options...
KORTES Posted January 31 Author Share #153 Posted January 31 I made a technological mistake and here is the result. I will have to try again.🙂 Meanwhile I am tuning the Proxxon circular saw, a gift for the New Year. Some components are very crude and require some changes. My best regards CiscoH, tarbrush, rlb and 7 others 6 4 Quote Link to comment Share on other sites More sharing options...
CiscoH Posted February 1 Share #154 Posted February 1 hope you can re-use some of the planks Kortes Keith Black, mtaylor, FriedClams and 1 other 4 Quote Link to comment Share on other sites More sharing options...
KORTES Posted February 1 Author Share #155 Posted February 1 I went back to the old technology. And got the expected result. Now the filling has to be done. JpR62, Valeriy V, GrandpaPhil and 11 others 13 1 Quote Link to comment Share on other sites More sharing options...
KORTES Posted February 1 Author Share #156 Posted February 1 19 hours ago, CiscoH said: hope you can re-use some of the planks Kortes Unfortunately I couldnt use the boards the second time. Maybe they will come in handy for the covering of a small lifeboat. CiscoH, Keith Black, Paul Le Wol and 1 other 4 Quote Link to comment Share on other sites More sharing options...
FriedClams Posted February 13 Share #157 Posted February 13 Sad to see your first effort go to the trash bin, especially as you planked it so beautifully. But your old method produced a very fine boat. Very nice work, Alexander. Gary KORTES, mtaylor and Keith Black 2 1 Quote Current Build Pelican Eastern-Rig Dragger Completed Scratch Builds Rangeley Guide Boat New England Stonington Dragger 1940 Auto Repair Shop Mack FK Shadowbox Link to comment Share on other sites More sharing options...
KORTES Posted February 22 Author Share #158 Posted February 22 Basically, I have finished the longboat. I don’t see the point in further detalisation. There will anyway be a boat on top. I didn’t do the the rudder as well, because I don’t have to install it anyway. All that’s left is to cover it with oil. wefalck, Paul Le Wol, CiscoH and 12 others 13 2 Quote Link to comment Share on other sites More sharing options...
KORTES Posted March 9 Author Share #159 Posted March 9 The oil has dried out. Color in natural light. BETAQDAVE, Valeriy V, mtaylor and 13 others 15 1 Quote Link to comment Share on other sites More sharing options...
BETAQDAVE Posted March 9 Share #160 Posted March 9 On 2/25/2023 at 2:52 AM, KORTES said: I decided to change the covers of the ports . That's a very remarkable improvement on such a small detail! FriedClams, Keith Black, mtaylor and 1 other 3 1 Quote Dave “You’ve just got to know your limitations” Dirty Harry Current Builds: Modified MS 1/8” scale Phantom, and modified plastic/wood hybrid of Aurora 1:87 scale whaling bark Wanderer. Past Builds: (Done & sold) 1/8” scale A.J. Fisher 2 mast schooner Challenge, 1/6” scale scratch built whaler Wanderer w/ plans & fittings from A.J. Fisher, and numerous plastic kits including 1/8” scale Revell U.S.S. Constitution (twice), Cutty Sark, and Mayflower. (Done & in dry dock) Modified 1/8” scale Revell U.S.S. Constitution w/ wooden deck and masting [too close encounter w/conc. floor in move] Hope to get to builds: MS 3/16” scale Pride of Baltimore II, MS 1/2” scale pinky schooner Glad Tidings, a scratch build 3/16” scale Phantom, and a scratch build 3/16" scale Denis Sullivan. Link to comment Share on other sites More sharing options...
BETAQDAVE Posted March 9 Share #161 Posted March 9 On 7/10/2023 at 1:25 PM, KORTES said: I also have great respect for hand crafts, but when you need to cut several identical elements by hand, it's quite stressful. That is probably true, but it just makes your results just that much more remarkable! My paternal grandfather was also very good at carving by hand back in the depression with his own handmade tools. I was always impressed by how he could create such beautiful sculptures and furniture from the most basic tools and scraps of lumber that he could get a hold of. I think that's who I inherited my urge to recycle rather than replace from. Keith Black, FriedClams, KORTES and 1 other 3 1 Quote Dave “You’ve just got to know your limitations” Dirty Harry Current Builds: Modified MS 1/8” scale Phantom, and modified plastic/wood hybrid of Aurora 1:87 scale whaling bark Wanderer. Past Builds: (Done & sold) 1/8” scale A.J. Fisher 2 mast schooner Challenge, 1/6” scale scratch built whaler Wanderer w/ plans & fittings from A.J. Fisher, and numerous plastic kits including 1/8” scale Revell U.S.S. Constitution (twice), Cutty Sark, and Mayflower. (Done & in dry dock) Modified 1/8” scale Revell U.S.S. Constitution w/ wooden deck and masting [too close encounter w/conc. floor in move] Hope to get to builds: MS 3/16” scale Pride of Baltimore II, MS 1/2” scale pinky schooner Glad Tidings, a scratch build 3/16” scale Phantom, and a scratch build 3/16" scale Denis Sullivan. Link to comment Share on other sites More sharing options...
FriedClams Posted March 11 Share #162 Posted March 11 Rich, warm color and so precisely built - beautiful, Alexander! Gary mtaylor, Keith Black and KORTES 2 1 Quote Current Build Pelican Eastern-Rig Dragger Completed Scratch Builds Rangeley Guide Boat New England Stonington Dragger 1940 Auto Repair Shop Mack FK Shadowbox Link to comment Share on other sites More sharing options...
KORTES Posted April 28 Author Share #163 Posted April 28 In general I have completed work on the small boat. On the drawing it comes without metal fastenings for the mast, after some thought I decided to do it as on the drawing. What is left to do is to cover it with oil, make two slipways and install it inside the longboat. mtaylor, BETAQDAVE, archjofo and 15 others 17 1 Quote Link to comment Share on other sites More sharing options...
KORTES Posted May 8 Author Share #164 Posted May 8 I have coated the boat with oil and made a slipway. Once assembled, it turned out to look like this. Macro photography revealed some disadvantages, but in the future I will eliminate them. mtaylor, Rudolf, davyboy and 13 others 13 3 Quote Link to comment Share on other sites More sharing options...
Keith Black Posted May 8 Share #165 Posted May 8 Beautiful ship's boats, Alexander. mtaylor, KORTES, CiscoH and 1 other 3 1 Quote Current Builds: 1870's Sternwheeler, Lula Wood Hull Screw Frigate USS Tennessee Decorative Carrack Warship Restoration, the Amelia Completed: 1880s Floating Steam Donkey Pile Driver Early Swift 1805 Model Restoration Link to comment Share on other sites More sharing options...
KORTES Posted June 29 Author Share #166 Posted June 29 Lately , i dont have much free time. The work on the shipyard is going slow. Several shots of the work on the carronade carriage. Rudolf, FriedClams, JpR62 and 7 others 10 Quote Link to comment Share on other sites More sharing options...
KORTES Posted June 29 Author Share #167 Posted June 29 I need to blacken the metal and assemble.The carronades will have to be refined due to some mistakes in dimensions. GrandpaPhil, rlb, Valeriy V and 14 others 14 3 Quote Link to comment Share on other sites More sharing options...
FriedClams Posted June 30 Share #168 Posted June 30 Thoughtful process for identical copies. Your carronades are coming along nicely, Alexander! Gary archjofo, Keith Black, mtaylor and 1 other 3 1 Quote Current Build Pelican Eastern-Rig Dragger Completed Scratch Builds Rangeley Guide Boat New England Stonington Dragger 1940 Auto Repair Shop Mack FK Shadowbox Link to comment Share on other sites More sharing options...
KORTES Posted August 2 Author Share #169 Posted August 2 Unfortunately, I got the artillery with a shortage, there were no trunnions for the carronades. I had to make it myself. The main difficulty was producing a large number of identical parts. Since I don’t have enough metalworking equipment, I had to use wood.I made it from black hornbeam which took me some attemps. I deliberately made it simplified, on my scale and with my “machinery park” - I think this is acceptable. Keith Black, BETAQDAVE, archjofo and 4 others 7 Quote Link to comment Share on other sites More sharing options...
KORTES Posted August 2 Author Share #170 Posted August 2 Its just a fitting at this step. davyboy, BETAQDAVE, tlevine and 10 others 13 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.