John Ruy Posted March 4, 2023 Author #61 Posted March 4, 2023 (edited) Progress on the Mainmast… Mainmast shaped and first coat of paint. Adding Rail… Added sheaves for Halyard and Topping Lift… Mast cap… Winch mounts… Working on shaping Double spreader out of kit supplied 4mm x 6mm Fir. Main Boom completed… Cheers 🍻 Edited March 4, 2023 by John Ruy yvesvidal, gsdpic, ccoyle and 5 others 8 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat
John Ruy Posted March 10, 2023 Author #62 Posted March 10, 2023 (edited) Mainmast continued… winches Cleats and things… Adding Striping tape for the rail… O-Rings to attach sails… Attaching Mainmast Great Shrouds… Covering the cable to turnbuckle connection with heat shrink. Great Shroud connection to the Mainmast… Tightening the Great Shrouds with the turnbuckles to align and support the Mainmast. Mainmast completed w/boom… Ready for Fore Stays and Flying Backstays. Here are few closeups of the Topping Lift, Out Haul and Sheet Lines. Looks like I need to move that sheet line block forward on the boom. Why is it you find your mistakes in front of everyone on MSW. 🙄 I’ll fix the sheet line tomorrow… Cheers 🍻 Edited March 10, 2023 by John Ruy gsdpic, DanB, Knocklouder and 9 others 10 2 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat
rshousha Posted March 10, 2023 #63 Posted March 10, 2023 That sheet line, ouch! It's always like that; 99% perfect and that pesky 1% has to jump out at you! This is amazing work. I can't get the smile off my face. Wonderful stuff! John Ruy 1 Quote Rick Shousha Montreal
John Ruy Posted March 27, 2023 Author #64 Posted March 27, 2023 (edited) Main Stays installed… Fixed that pesky Main Sheet… Main Little Shrouds installed… Main Halyard tied off with rope coil. Both Jib and Flying Jib Halyards rigged… Note: Giant Shrouds removed as I am re-working the Spreaders to install the Upper Shroud. Cheers 🍻 Edited March 28, 2023 by John Ruy BobG, G.L., yvesvidal and 4 others 6 1 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat
John Ruy Posted March 30, 2023 Author #65 Posted March 30, 2023 Main Boom Topping Lift… I re-shaped the Spreaders and installed the upper shrouds. Giant Shrouds re-installed. The Upper Shrouds are the turnbuckles placed between the Giant Shrouds. Flying Shrouds (starboard) Two more Flying Shrouds to complete on the Port side and she will be ready for Sails. Cheers 🍻 gsdpic, Ghost029, yvesvidal and 5 others 8 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat
John Ruy Posted April 2, 2023 Author #66 Posted April 2, 2023 Flying Shrouds completed… Shrouds and stays completed. She is ready for Sails… Cheers 🍻 gmctaggart, BobG, Ian_Grant and 5 others 8 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat
gmctaggart Posted April 2, 2023 #67 Posted April 2, 2023 Beautiful build so far. Love the fine detail that you have put into it. Will follow this with interested. Gord John Ruy 1 Quote
John Ruy Posted April 2, 2023 Author #68 Posted April 2, 2023 7 hours ago, gmctaggart said: Beautiful build so far. Love the fine detail that you have put into it. Will follow this with interested. Gord Welcome aboard… Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat
rshousha Posted April 3, 2023 #69 Posted April 3, 2023 I really like the 1:24 scale of this model. It makes the rigging look quite realistic. She sure would make a fine R/C model in 1:12 scale. John Ruy 1 Quote Rick Shousha Montreal
John Ruy Posted April 3, 2023 Author #70 Posted April 3, 2023 55 minutes ago, rshousha said: I really like the 1:24 scale of this model. It makes the rigging look quite realistic. She sure would make a fine R/C model in 1:12 scale. Rick, Excellent idea… There is a 1/24 scale RC of this model on here. rshousha and FreekS 2 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat
FreekS Posted April 4, 2023 #71 Posted April 4, 2023 (edited) On 1/5/2023 at 4:50 PM, John Ruy said: Finishing the Hull… I am using the above photos as my guide to finishing the hull of this impressive sea-faring yacht. I really want to get this right. 🧐 After 3 sanding and coats of paint, the final fine sanding is complete and we are ready for striping prior to the clear coat. Water Line striping completed… I am going to have to create my own lettering decals for the stern and bow. She is coming along. Cheers 🍻 fantastic build! I had not seen your build log! I only saw one in an Italian forum! Mine is RC as you say - still learning how to sail her!! I have not done lettering on mine yet - if you have a decal be really interested! Edited April 4, 2023 by FreekS John Ruy 1 Quote
John Ruy Posted April 4, 2023 Author #72 Posted April 4, 2023 5 hours ago, FreekS said: fantastic build! I had not seen your build log! I only saw one in an Italian forum! Mine is RC as you say - still learning how to sail her!! I have not done lettering on mine yet - if you have a decal be really interested! I liked your build as well… I produced my own Decals. I can PM you with the MS Word file and the details. It turns out water slide decals are a lot easier to produce than I thought. If you want to PM your mailing address to me, I’ll mail you my extra copy. John This is the trim tape I used for the stripe. FreekS, BobG and yvesvidal 3 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat
John Ruy Posted May 3, 2023 Author #73 Posted May 3, 2023 Sails… Steady as she goes… Cheers 🍻 G.L., gsdpic, hof00 and 7 others 5 5 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat
John Ruy Posted May 13, 2023 Author #74 Posted May 13, 2023 Sails completed… Added a bit of a fair wind in her sails with Fabric stiffener and a hair dryer. Ready for railings… Cheers 🍻 gsdpic, Ghost029, Roger Pellett and 7 others 6 4 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat
yvesvidal Posted May 14, 2023 #75 Posted May 14, 2023 Superb with its sails. What a comeback for this model !!!! Yves Ian_Grant and John Ruy 1 1 Quote
rshousha Posted May 14, 2023 #76 Posted May 14, 2023 Nicely done! I like the little seat cushions. They look quite comfy. Regards, Rick John Ruy 1 Quote Rick Shousha Montreal
John Ruy Posted May 20, 2023 Author #77 Posted May 20, 2023 Hand Rails… Hand Rails complete… Cheers 🍻 gsdpic, BobG, Roger Pellett and 2 others 4 1 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat
John Ruy Posted May 21, 2023 Author #78 Posted May 21, 2023 FINISHED!!! Hoisted the Italian flag 🇮🇹 on the Mizzen Mast. She is done… @rshousha Thank you Rick for the opportunity to complete this beauty. Cheers 🍻 Knocklouder, BobG, FreekS and 6 others 6 3 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat
Knocklouder Posted May 21, 2023 #79 Posted May 21, 2023 That is an awesome model, you do some nice work. Congratulations John Ruy and VitusBering 1 1 Quote Start so you can Finish !! Finished: The Sea of Galilee Boat-Scott Miller-1:20 , Amati } Hannah Ship in a Bottle:Santa Maria : LA Pinta : La Nana : The Mayflower : Viking Ship Drakkar The King Of the Mississippi Artesania Latina 1:80 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models
Reggiemon Posted May 21, 2023 #80 Posted May 21, 2023 Wow, a really good job on this kit! VitusBering and John Ruy 1 1 Quote Building: 1/10 scale 1922 Alden Malabar ll R/C Finished: Rappahannock Boat Works Torpedo stern, steam launch. R/C 1/6 scale steam launch, Corel Flying Fish 1860
goatfarmer11 Posted May 21, 2023 #81 Posted May 21, 2023 Amazing work, well done sir. VitusBering and John Ruy 1 1 Quote =Denis- _____________________________________________________________________________________________________________________________________ Under Construction Miranda
yvesvidal Posted May 21, 2023 #82 Posted May 21, 2023 Superb work John. What a gorgeous model. Yves hof00 and John Ruy 1 1 Quote
BobG Posted May 22, 2023 #83 Posted May 22, 2023 Spectacular model, John! Congrats! John Ruy 1 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
John Ruy Posted May 29, 2023 Author #84 Posted May 29, 2023 (edited) Missing details… Oops… I forgot the Reefing Lines on the Main Sail. 🤨. This would have been a lot easier before the mounting of the sails. Reefing Lines complete… Also noticed that I hadn’t placed the Spinnaker Booms. 😜 Now I can say she is FINISHED! As long as I walk away now. Darn OCD. 🤣 Edited May 29, 2023 by John Ruy rshousha, FreekS, yvesvidal and 4 others 6 1 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat
Knocklouder Posted May 29, 2023 #85 Posted May 29, 2023 Nicely done, you can really put some nice details into your models , amazing work. John Ruy 1 Quote Start so you can Finish !! Finished: The Sea of Galilee Boat-Scott Miller-1:20 , Amati } Hannah Ship in a Bottle:Santa Maria : LA Pinta : La Nana : The Mayflower : Viking Ship Drakkar The King Of the Mississippi Artesania Latina 1:80 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.