Jump to content

Recommended Posts

Posted

Hello Everyone,

While I’m new to MSW I am not new to model ship building. In my earlier life, I built two period sailing ships: Heller 1/200 L'indomptable and the Revell 1/96 Elizabethan Man ‘O War. Sadly, these did not survive the decades since I built them. My current project is the Heller 1/100 HMS Victory. While I say ‘current’ my story is similar to that of others in this forum. I bought my kit around about 1984 but a busy career and family life meant the project became an on-again off-again proposition. Clearly, more off than on. I am now retired and motivated to push this project to completion. I have poured through the building logs of several of the MSW members and am mind blown - while also a tad bit intimidated -  by the quality of the builds and the amount of knowledge out there. I will need help. And lots of it. Many thanks in advance!

Cheers,

Malcolm

7F6B1337-DFD2-43EB-8036-AC2BE868B644.jpeg

Posted

:sign:

Good luck on your journey  !!  :cheers:

Start so you can Finish !!

Finished:         The Sea of Galilee Boat-Scott Miller-1:20 ,   Amati } Hannah Ship in a Bottle:Santa Maria : LA  Pinta : La Nana : The Mayflower : Viking Ship Drakkar  The King Of the Mississippi  Artesania Latina  1:80 

 

 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models :)

Posted

Malcolm, welcome to MSW. Glad to have you aboard. 

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted

:sign:

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Posted

Malcolm: I am originally from Ottawa and still have a family cottage at Pike Lake... just near Stanleyville.. miss that country alot. Enjoy the view out your window for me and welcome to MSW!

 

Mike Draper

Mike Draper

Whitehorse, Yukon

Canada

Member, Nautical Research Guild

Posted
24 minutes ago, Kusawa2000 said:

Malcolm: I am originally from Ottawa and still have a family cottage at Pike Lake... just near Stanleyville.. miss that country alot. Enjoy the view out your window for me and welcome to MSW!

 

Mike Draper

Thanks for the warm welcome, Mike! Me too from Ottawa - I grew up in the Glebe. My wife and I retired here on Long Lake (Tay Valley) in 2018 on what was my family lakefront property. We go to the Stanleyville dump at least once per week. Let me know if/when you’re at your cottage and please stop by for a refreshment. Here’s that view out our window 😊

E17CCB12-3DEA-47CE-BC47-687BB41F4D5E.thumb.jpeg.71fe01ca11add6966031ed6c9df84f0d.jpeg

Posted
4 hours ago, Malcolm Brown said:

Thanks for the warm welcome, Mike! Me too from Ottawa - I grew up in the Glebe. My wife and I retired here on Long Lake (Tay Valley) in 2018 on what was my family lakefront property. We go to the Stanleyville dump at least once per week. Let me know if/when you’re at your cottage and please stop by for a refreshment. Here’s that view out our window 😊

E17CCB12-3DEA-47CE-BC47-687BB41F4D5E.thumb.jpeg.71fe01ca11add6966031ed6c9df84f0d.jpeg

Malcolm: I will definitely will take you up on your offer. I plan to be down there in July so can connect then. Thanks for the pic. The view brings back great memories of the Ottawa valley

 

Mike Draper

 

 

Mike Draper

Whitehorse, Yukon

Canada

Member, Nautical Research Guild

Posted
12 hours ago, WestPort said:

Welcome Malcolm.   I didn't realize there were others so close by that are also interested in this hobby.  I live just outside Westport on Upper Rideau Lake.  

That’s awesome! We’re on Long Lake (there’s a Long Lake closer to you in Frontenac County but we’re in Tay Valley). We go to Westport frequently - more so in the warmer months. Maybe we can connect some time.

Posted
10 hours ago, Kusawa2000 said:

Malcolm: I will definitely will take you up on your offer. I plan to be down there in July so can connect then. Thanks for the pic. The view brings back great memories of the Ottawa valley

 

Mike Draper

 

 

Perfect!

Posted
10 hours ago, Malcolm Brown said:

That’s awesome! We’re on Long Lake (there’s a Long Lake closer to you in Frontenac County but we’re in Tay Valley). We go to Westport frequently - more so in the warmer months. Maybe we can connect some time.

Definitely should connect at some point.  We are in Perth often as well. 

Posted
On 2/22/2024 at 7:50 PM, Kusawa2000 said:

Malcolm: I am originally from Ottawa and still have a family cottage at Pike Lake... just near Stanleyville.. miss that country alot. Enjoy the view out your window for me and welcome to MSW!

 

Mike Draper

Mike, I can't believe this; first you help us get plans for "SS Klondike" from the Parks Canada office in the same Whitehorse building where you work, now you tell us you still have a cottage on Pike Lake. Our cottage is also on Pike near Stanleyville! We go in past the playground and cemetery and keep to the left at every intersection to reach our cottage which is just opposite the largest of the group of three islands, on which people used to camp. Our kids called it "Beaver Island" because there was an active beaver lodge on it when we bought the place, only to watch all the big old birch trees on the island be chewed down one by one. What a small world.

Posted
On 2/22/2024 at 10:47 PM, WestPort said:

Welcome Malcolm.   I didn't realize there were others so close by that are also interested in this hobby.  I live just outside Westport on Upper Rideau Lake.  

Westport, we have a cottage on Pike Lake near Stanleyville and I often cycle a loop along #10 to Westport then back through Newboro to cross at Narrows Lock and hence back to Stanleyville. The three of us should get together this summer for  :cheers:

 

Cheers,

Ian

Posted
6 hours ago, Ian_Grant said:

Westport, we have a cottage on Pike Lake near Stanleyville and I often cycle a loop along #10 to Westport then back through Newboro to cross at Narrows Lock and hence back to Stanleyville. The three of us should get together this summer for  :cheers:

 

Cheers,

Ian

We definitely should do that.  

Posted
11 hours ago, Ian_Grant said:

Mike, I can't believe this; first you help us get plans for "SS Klondike" from the Parks Canada office in the same Whitehorse building where you work, now you tell us you still have a cottage on Pike Lake. Our cottage is also on Pike near Stanleyville! We go in past the playground and cemetery and keep to the left at every intersection to reach our cottage which is just opposite the largest of the group of three islands, on which people used to camp. Our kids called it "Beaver Island" because there was an active beaver lodge on it when we bought the place, only to watch all the big old birch trees on the island be chewed down one by one. What a small world.

Ian: My sister and I have a cottage at one of the two bays at the Perth end of the lake.. my mom and dad bought it in the late 1960s and have it ever since. While I havent bought my plane ticket I will probably be in Ottawa from July 4th to around the 19th..the first week I will be at the bluesfest but after that I will probably up at the cottage.. I will let you kids know when I have my dates.... i think that would be a blast! 

 

MIKE 

Mike Draper

Whitehorse, Yukon

Canada

Member, Nautical Research Guild

Posted
27 minutes ago, Kusawa2000 said:

Ian: My sister and I have a cottage at one of the two bays at the Perth end of the lake.. my mom and dad bought it in the late 1960s and have it ever since. While I havent bought my plane ticket I will probably be in Ottawa from July 4th to around the 19th..the first week I will be at the bluesfest but after that I will probably up at the cottage.. I will let you kids know when I have my dates.... i think that would be a blast! 

 

MIKE 

The two bays .... five minutes by canoe from our place. Look forward to it!

Posted
21 hours ago, Ian_Grant said:

Westport, we have a cottage on Pike Lake near Stanleyville and I often cycle a loop along #10 to Westport then back through Newboro to cross at Narrows Lock and hence back to Stanleyville. The three of us should get together this summer for  :cheers:

 

Cheers,

Ian

I’m in!!  I do the exact same loop coming from our home that is off of Elm Grove Road. Elm Grove turns into Lally Road (Rte 21) just after Murphy’s Point PP. The Narrows Lock Road is a blast to drive. Especially in my convertible😁 Did I mention I have a pub in my basement? 😁

Posted
On 2/23/2024 at 5:19 PM, William-Victory said:

Hey Malcom. Sorry I didn’t visit earlier. 
im exited to see what you are doing and current progress. 

Thanks, and I’m excited to be following your progress as well since we seem to be at about the same stage. I have been spending a lot of time lately just researching. As great as Longridge is, it’s a heavy read and I’m a visual person, i.e., I need pictures! 😁

Posted
8 minutes ago, Malcolm Brown said:

I’m in!!  I do the exact same loop coming from our home that is off of Elm Grove Road. Elm Grove turns into Lally Road (Rte 21) just after Murphy’s Point PP. The Narrows Lock Road is a blast to drive. Especially in my convertible😁 Did I mention I have a pub in my basement? 😁

A pub in your basement - sounds like we have a location 😁.  I'm in.  

Posted

 

17 minutes ago, Malcolm Brown said:

I’m in!!  I do the exact same loop coming from our home that is off of Elm Grove Road. Elm Grove turns into Lally Road (Rte 21) just after Murphy’s Point PP. The Narrows Lock Road is a blast to drive. Especially in my convertible😁 Did I mention I have a pub in my basement? 😁

 Watch out for cyclists - it could be me. 😏

 

It is a nice road especially nearer the Narrows end. Remember when it was mostly unpaved from Stanleyville to the Narrows? I remember once coming across a couple whose car had slid into the very sandy ditch at the side. Hopeless - call a tow truck. Geez that was a long time ago.

Posted
14 hours ago, Ian_Grant said:

The two bays .... five minutes by canoe from our place. Look forward to it!

we will definitely have to connect. I will let you know what my schedule is once I bought my plane ticket and got plans figured out.. this is seriously cool

 

MIKE

Mike Draper

Whitehorse, Yukon

Canada

Member, Nautical Research Guild

Posted
2 hours ago, Malcolm Brown said:

Dual taps, comfortable seating, excellent service and fully Nelson-ified

 Your clock needs to be permanently stopped at 5 o'clock. :)

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted
4 hours ago, Keith Black said:

Your clock needs to be permanently stopped at 5 o'clock. :)

LOL, you got me on a technicality, why 5 o’clock - Nelson’s ‘TOD’? (been watching too much Chicago Med lately). Btw, that clock is an old Waltham that was pulled out of a 1936 Cadillac during the Great Depression years when cars were expendable. It belonged to a friend of my parents whose father owned the Cadi. The windup stem would have projected below the dashboard. Sadly, the main spring is gone but that means it can be stuck at any time I deem appropriate 😁

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...