Jump to content

Paddle to the Sea by Jason Builder - FINISHED - Solid Wood - from 1941 children's book of same name


Recommended Posts

Greetings!

 

And now I return to the dreams of adventure of my youth!  "Paddle to the Sea" is a childrens' book, written and illustrated by Holling Clancy Holling, and published in 1941.  It tells the tale of the voyage of a small carved wooden canoe and it's paddler as they follow the currents of the Great Lakes, from Nipigon country out to the Atlantic Ocean.  A Native American boy carves the canoe and it's stoic captain, paints it, and places it in the snow, high in the hills over Lake Nipigon.  When the snow melts, it takes "Paddle to the Sea" with it, and the book tells the story of all the people, machines, technology, animals and natural wonders that the little canoe model sees on it's epic journey through the Great Lakes to the Atlantic.  I loved the book as a boy, and I still have the book.  I live in Wisconsin, not far from Lake Michigan, and the book has always been special to me.  As a boy I thought how cool it would be to make this canoe and paddler model......now I have decided to do it!  Below is documented my best attempt at building as close to accurate a model as possible of the actual "Paddle to the Sea" canoe model from the book.

 

Making the drawings:  There are illustrations throughout the book of Paddle to the Sea, and there are also good clues as to materials, dimensions, and finish.  The book tells of the young Native American boy in Nipigon Country (North shore of Lake Superior, around Lake Nipigon), who take "many days" whittling a "piece of pine" into a "canoe one foot long".  It also advises of a rudder made of tin and lead ballast.  The book also advises "oil paints" were used to paint it, along the with words carved into the bottom of the hull , "Please put me back in water, I am Paddle to the Sea".   Starting with the known length of 12", I scaled other dimensions from the many pictures in the book and calculated the various dimensions.  Then I took those dimensions and created a life-size, to-scale, color drawing of the model, which I will use to take dimensions from as I build the model.

 

P1.jpg.61e54881fe1ce7e1ab75bdfc84dec8fe.jpg

P2.jpg.d6d1e6f277536bbf915d847675cee3a5.jpg

Link to comment
Share on other sites

Hi Everyone,

 

The book states the model was made from a piece of pine, so here is my raw material, scrap 2x4 from the shop:

P13.jpg.f77672bd0159805fc9a9f3b11614edde.jpg

The 2x4 is not quite thick enough, so I sawed and planed two blocks which I will glue together to make the hull blank.

P12.jpg.dbe2d18475ef59147eaafaab5aad3fd2.jpg

 

Here is the hull blank glued together , and cut and planed to finished length, width , height.  I made some paper templates of the plan view and profile shapes of the hull.  Tracing the profile here.

P7.jpg.bf3c425ec34a8339c6880f1c8005b704.jpg

Profile cut using the bandsaw:

P6.jpg.f5765cfde8622e996182478273132e9a.jpg

Tracing on the plan view shape:

P5.jpg.bece920064930a680f77ba0b8fd5995e.jpg

Here is the blank cut out on the bandsaw.....all carving from here on out:

P4.jpg.be502219fd830f82b10bc6e732b5b83e.jpg

 

 

Link to comment
Share on other sites

Hi!

 

Starting on the paddler himself.  Also of pine.

P11.jpg.a50cb3a8f09b0aea1b33f81bb78106c6.jpg

P9.jpg.99427f82eb8f6458e9d429b2dc97ca19.jpg

With the blank cut out on the bandsaw, I started rough carving the figure.

P8.jpg.e2f267307a755a9ab51ffa40597a875f.jpg

Link to comment
Share on other sites

The pictures of the model clearly show a shallow recess in the interior of the canoe.  Here I am carving that recess.

 

P14.jpg.82542417ff1a37bd80dd84e55f6446c2.jpg

And here is the current rough carved status:

P15.thumb.jpg.0959cd8097b7d82dda00af4de3089f0b.jpg

 

Link to comment
Share on other sites

What a great project!

 I too grew up reading Paddle to the Sea.  I loved the book.  35 years ago I was fortunate to be given the opportunity to move from the Ohio Valley to accept a new job in the Great Lakes region and I accepted it in a heartbeat.  I can just barely see a tiny sliver of Lake Superior from a window on the second story of my house.  I also made sure that my children grew up with the book too.

Did you know that there is a Paddle to the Sea movie too?  Here in Duluth the Army Corps of Engineers runs a nice museum dealing with Lake Superior.  During the summer tourist season they show movies about the lakes in a conference room.  Visiting with my two kids and my granddaughters the announcement came over the speaker that there had been a special request from a family visiting to show Paddle to the Sea.  My daughter had made the request.  The movie while beautifully filmed cannot reproduce the 1940's picture of the industrial lakes that Holling does with his book.

 

Roger 

Link to comment
Share on other sites

The movie:

 

 

Brad/NavyShooter

 

Build Log: HMS Blackpool - 1/144 3D Print RC

Build Log:   HMCS Bonaventure- 1/96 - A Fitting Out

Completed Build: RMS Titanic - 1/100 - 3D Print - Pond Float display

Completed Build:  HMCS St Thomas - 1/48 - 3D printed Bens Worx

Completed Build:  3D Printed Liberty Ship - 1/96 - RC

 

A slightly grumpy, not quite retired ex-RCN Chief....hanging my hat (or helmet now...) in the Halifax NS area. 

Link to comment
Share on other sites

Posted (edited)

Thanks so much for the responses and for sharing your connections to the Paddle to the Sea story!!

 

Tonight I continued some carving.

 

I laid out and then carved the recess for the ballast.

P21.jpg.7a23c595318105a4b1ef084a80e8cb47.jpg

I have alot of lead left from past projects wherein I would melt lead and use it in projects.  Considering the known health/brain damage risks we now know from lead exposure, I will make a variation from the originally described Paddle to the Sea.  I will use low temp model casting metal from Micromark, type 208.  I will melt this metal and fill this cavity.

P20.jpg.9399ff74fcf09bb2198a0e9494991ead.jpg

These Flexcut carving chisels are awesome!!!

I am also using my Helle knife:

P19.jpg.b756e46d826f378b5da4c174d97cd140.jpg

Hull after rough carving:

P17.jpg.44baf0963fc6e18610a99f3cff8683fe.jpg

Another amazing tool for wordworking, is the SHINTO RASP" pictured below.  Amazing, efficient, tool with two different aggressiveness faces.

P16.jpg.6d671ef9258e48d296cf1bb63830b3c8.jpg

 

 

 

 

 

 

Edited by Jason Builder
Link to comment
Share on other sites

  • 2 weeks later...

Hi Everyone!

 

Got around to some sanding, carving the packs at the bow and stern, and made/installed the thwarts.  Continues to be a very fun project.

 

P25.jpg.b9a5897ec918461b70802b848c098113.jpg

P24.jpg.7291cf256164b9560c5c1bf1146de791.jpg

P23.jpg.79d21ee2caaa159b37d80a3ad6d057a7.jpg

P22.jpg.383b94ef43294bec1e1f0abeb03fd0ab.jpg

 

Link to comment
Share on other sites

hi Chris, Great idea!!  I, too, would love to see that and I have hte book here, of course, in front of me as I build the model.

 

To all: even though this is a kids book, anyone with a inquisitive interest in industry of the great lakes in the first half of the 20th century (canal locks, sawmills and such) would love the illustrations in the margins of this book!  Thank you for the note, Chris.

 

-Jason

Link to comment
Share on other sites

Posted (edited)

Goedenavond vrienden,

 

Tonight was a special night because I got to light a burner, melt metal, and do my best to pour it into my model!  At the point I was at in carving the hull and installing the rest of the pieces permanently, I figured I better pour the metal into the ballast slot in the bottom of the hull in case it went haywire and wrecked it.

 

Micromark Type 280 model casting metal.  tin/bismuth alloy with no lead or cadmium (I know a deviation from the lead used by the boy in the book).  Melting temp 280degF.  I bought two 1 7/8" pucks to melt down but only needed one.

P31.jpg.4221729605cca4e22e3668e1a7ea9a64.jpg

I melted the metal down in a tiny pan, which unfortunately had no spout for pouring.  It worked well for melting the metal.  I have a heavy pot and ladle for melting lead but did not want to contaminate this "toy" with lead.  A simple camp stove was used to melt this low temp model casting metal; it melted quicker than you'd fry bacon.  The "camp stove" is not the cleanest in the world as this is the stove I use to melt and make beeswax candles, not for cooking, so there is too much wax residue in the basin of the stove which I need to clean up.  Back to model making....I will need to remember this handy alloy for future projects.

P28.jpg.7aee1b378cf4afe953e1cea70a2b14e4.jpg

But now, to back up a bit, before melting the metal, I levelled the hull in a vise in both directions.

P30.jpg.88cce807c2feb22af23145c1d631689c.jpg

P29.jpg.93066d67480648ec6e8059582c2c33e9.jpg

Then, with the metal melted, I walked as quickly as I could, the 20 feet from stove to overturned hull.  In that time the hot metal formed a semi-solid skin on it's surface which I had to overcome when pouring, and which caused an overflow over the cavity intended for the pouring of the metal.  This is visible in the photo.  After this initial spilling of the milk, the pour went perfectly and I will be able to remove the metal from the overflow spill.  All told, it would be better to use a deeper melting pot with a spout for this task.

P27.jpg.a53f9b306366a62a7e53a27f24e060fd.jpg

P26.jpg.305c3035ceae97cec55600df9bcc2a95.jpg

 

Now I will wait for this to cool and I will file and sand off the metal and all will be well.   I had a fire extinguisher at my side during this step.

 

 

 

 

 

 

Edited by Jason Builder
Link to comment
Share on other sites

Posted (edited)

Notes on deviation from original design:

 

I set out to build an accurate reconstruction of the model from the book, I think I will succeed and fail in various ways.

 

1. Dimensions and accuracy of shape, form and color:  I believe I will be very accurate in these areas.  I watched the movie clip above of the ship provided by Navyshooter, and I see three thwarts in the model used in the movie, and I fully respect that model, but I do not see three thwarts anywhere in the book, so I will stick with two.  Each interpreter of a model must make their own decisions, and whoever made that model for the movie did an outstanding job in my view. 

2. Materials:

   a. All wooden parts in the book : pine.  All wooden parts in my model: Pine.

   b. Lead ballast in the book:  Tin/Bismuth in my model....a deviation for safety purposes

   c.  "tin" rudder in the book, I will use a piece of aluminum, a deviation for long term corrosion purposes.

   d. "Enamel" paints in the book, I will use same.

3. Tools:  from Chapter 1 in the book , I  see a hatchet and two different knives for carving the model.  I used a table saw and planer to form the pine blank, and I used a bandsaw to cut out blanks for the various pieces as shown in my photos.....maybe I should have used a hand jigsaw which would have been doable.  I did only use knives and chisels for carving, no dremels. 

4. Construction:  It is not clear from the book how the model was exactly constructed, but the impression I get from the early pages is that the boy carved it out of a single piece of pine.  I made my hull from a piece of pine and am making the thwarts, packs, and man, from separate pieces which I am gluing to the model.  This may be inaccurate, but! I submit the illustration from the 2nd page of chapter 26 to support my decision to make the man from a separate piece of wood with the grain vertical along the upright plane of the man.  For copyright purposes I will not post the illustrations here.  The illustration supports that the boy built the model with the man made from a separate piece of wood with vertical grain perpendicular to the grain of the hull.  I will use wooden pegs to attach the perpendicular-grained pieces of the man and the canoe. 

Edited by Jason Builder
Link to comment
Share on other sites

Posted (edited)

Good Day All,

 

I carved the mid-ships pack, the top surface of which is at an angle as shown.

P36.jpg.3fd13a2ae4b9e82fd65c1d98537a907e.jpg

 

P34.jpg.4ea728e9f1aee784045bbd893bdd7915.jpg

Then I made and glued on the hands.....he is happy to have his hands!  The right hand is hollowed out to accept the paddle.

P45.jpg.1e5cabc8158073c72a221252834b7723.jpg

I cut the rudder out of aluminum with a tin snips, and then sanded the sharp edges smooth.  I cut a slot for the rudder using a thin-width blade in the hull for the rudder and then installed the rudder with super glue.

P42.jpg.1de9d9af0cb872cb410c393ffc85ec77.jpg

P41.jpg.06c0f59deec171cd4748ca5facb987b1.jpg

P43.jpg.055840ffd1d078b9c35a8dae69f34714.jpg

P44.jpg.f5ce432558da1ec2f3c56d3b0b00d9d3.jpg

 

And now for the final piece....the paddle!

P39.jpg.0f37f0240b2b9dd12a7c944a0ebddcb5.jpg

P40.jpg.5d5d8b492ef5fa53aab6e6772b32f2ed.jpg

Next I wrote out the words on the bottom of the canoe and then etched them into the wood with an awl.  Sanding the wood and the cast metal worked grey metal dust into the wood grain.

P38.jpg.1cfee4f222f60430c970e42de4a8f820.jpg

P37.jpg.10fada4651e010a842c4fd5ed912ba61.jpg

Now time to get some paint!  I will do some painting before final assembly of the parts.....in fact I wish I would not have glued in the aft pack already.

P46.jpg.80fc68a6013b40e1acb38e943d88b4e6.jpg

 

 

 

 

Edited by Jason Builder
Link to comment
Share on other sites

  • 2 weeks later...

Aloha!!!

 

Painting underway...fun, but going slow due to work and slow dry time of oil paints.

 

P47.jpg.b1010e36fcb5bfb464d78d23d2078e4d.jpg

 

 

Link to comment
Share on other sites

Posted (edited)

Looks great Jason, Don't you just hate drying time lol. This is such a great log and story thanks.

Bob M.     :cheers:

Edited by Knocklouder
always typos

Start so you can Finish !!

Finished:         The Sea of Galilee Boat-Scott Miller-1:20 ,   Amati } Hannah Ship in a Bottle:Santa Maria : LA  Pinta : La Nana : The Mayflower : Viking Ship Drakkar  The King Of the Mississippi  Artesania Latina  1:80 

 

 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models :)

Link to comment
Share on other sites

Showed your model to my wife who correctly identified it as Paddle to the Sea.  She used this book in teaching 5th grade in Southeastern Ohio many years ago.

 

Up here on Lake Superior there has been at least one classroom attempt to duplicate Paddle’s voyage with the students each launching their home built model in the Lake.  A couple were found on local beaches.  No messages yet from the St Lawrence River!
 

Roger

Link to comment
Share on other sites

Jason,  a great little project. 

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

  • 2 weeks later...

Thanks for the comments all!  Painting is proceeding bit by bit.  Painting in process....note that I have not glued the individual carved pieces together yet, it is easier to paint them individually and then glue them together.

P48.jpg.deebd189bc45eb3288ed91c75ee8474f.jpg

Link to comment
Share on other sites

Hi Everyone,  Almost done!  Painted the blue trim/triangles on his sleeves, and some more colors on the hull...... now only the final black paint on the hull and the white feather in his hair remains.

 

P49.jpg.6424caefdcd38041c4fcb24bd684c06d.jpg

 

Link to comment
Share on other sites

Posted (edited)

Greetings!

 

Final paint is still wet, but this fun model is complete!!  Thanks to all of you who provided wonderful anecdotes and comments during the making of this little model.  Now I will find a nice place to display it, maybe with the book, or a map behind it.

 

Peace!

 

Jason

 

PaddletotheSeaModel1.thumb.jpg.c64c8988ea0ef9119518c649ec09be5d.jpg

PaddletotheSeaModel2.thumb.jpg.f0641aa706bf44f328ba1b98012e18e6.jpg

 

PaddletotheSeaModel3.thumb.jpg.628c4d1e2ec5eba86e4d3caf00f88fa8.jpg

IMG_6145.thumb.jpeg.7e45d028aad8fbd6026cf279901667f9.jpeg

Edited by Jason Builder
Link to comment
Share on other sites

Awesome build, thanks for posting this. It's so cool.:cheers:

Bob M.

Start so you can Finish !!

Finished:         The Sea of Galilee Boat-Scott Miller-1:20 ,   Amati } Hannah Ship in a Bottle:Santa Maria : LA  Pinta : La Nana : The Mayflower : Viking Ship Drakkar  The King Of the Mississippi  Artesania Latina  1:80 

 

 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...