Jump to content

HMS Victory by guraus - scale 1:48 - plank on frame


Recommended Posts

Thank you all for the kind words and appreciation.

 

 

Hello Alexandru, why not continue until the first part of the mats ( the tops) with dormant ropes. It would be more complete.

No?

 

Isalbert

 

Isalbert,

 

I thought about that, I even made the main mast but when I dry fit it into the model, the size of it scared me. The model is big anyway and with lower masts would have gain a lot in height  - so much that it won't fit in my car anymore and be really difficult to even take out from my basement where my workshop is.

 

So I decided to not do any masts on the Victory, and to reuse the already made mast for another project. Additionally the custom made display box I ordered was made for the model without masts - and I payed a lot for it. To all this add the fact that I am working on this model for more than 9 years so I really needed a change - thus the decision to stop were I am and call it "done". There are a lot of other small details I could have done on it as it is (without increase in size) but in the end I decided not to.

 

Alexandru

For all my builds please visit my site at: http://www.AlexShipModels.com

 

Previous builds

 

Link to comment
Share on other sites

  • 2 weeks later...

Excellent job Alexandru! She looks fantastic!

-Elijah

 

Current build(s):

Continental Gunboat Philadelphia by Model Shipways

https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/

 

Completed build(s):

Model Shipways Phantom

http://modelshipworld.com/index.php?showtopic=12376

 

Member of:

The Nautical Research Guild

N.R.M.S.S. (Nautical Research and Model Ship Society)

Link to comment
Share on other sites

Magnificent work.

 

Rob

Current build:

Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196

 

 

Finished build:

Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/#

 

Current build(On hold):

Build log: 1/96  Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/

 

Completed build:  http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/

The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts."

Link to comment
Share on other sites

G'day Alexandru

Congratulations on a marvelous model!

I'm sure l8ke many others, I am very sad to say goodbye to this outstanding log.

I'll be waiting with open arms for your next venture.

Havagooday my friend

Greg

"Nothing is impossible, it's only what limitations that you put on yourself make it seems impossible! "

 

Current log : The Royal Yacht Royal Caroline 1749 1:32 by Greg Ashwood:...

 

Link to comment
Share on other sites

It was a pleasure to follow, your website is now my goto link for people interested in modelling! :)

Looking forward to follow your next project!

Link to comment
Share on other sites

Alexandru

 

I went to your sight.  Beautiful photos.  I saw that you did more work on the stern gallery.  Can you explain how you did the balusters?  I saw the photos, but I wasn't sure how you formed them.

 

thanks

Marc

Link to comment
Share on other sites

Alexandru

 

I went to your sight.  Beautiful photos.  I saw that you did more work on the stern gallery.  Can you explain how you did the balusters?  I saw the photos, but I wasn't sure how you formed them.

 

thanks

Marc

 

Hello Mark,

 

Sorry for the late replay but my computer (where the pictures were) was broken and it took a while to fix it.

 

Here is a short description on how I did the balusters:

  1. I cut the desired shape in a piece of steel (an used broken knife blade) - you can see the shape in the first picture.
  2. On the back I glued a piece of wood the same thickness as the balusters (2mm in my case) at same distance (2mm) from the top of the shaped blade.
  3. I also glued two more pieces same thickness to delimit the length of the baluster stock - about 25mm apart. This way the square 2mm stock cut at 25mm length will fit exactly in that space and won't move sideways and its top will be flush with the top of the shaped blade.
  4. The whole assembly was hold in a vice.
  5. The square pieces of box wood (blanks) were placed in that notch and fixed in position by two small clamps as seen in the second picture. This kept the future baluster from moving back and forth on the next operation - filing the shape. 
  6. With several small jeweller files (square, round and trapezoidal) the shape from the blade was filed into the wood. Be careful to keep the file perpendicular on the template and horizontal so to have the same depth of the cuts across. See third picture for the result of this operation.
  7. Losses the clamps, remove the baluster, turn it 90 degrees, put it back and fix it with the clamps.
  8. Repeat step 6
  9. Repeat step 7 again by turning the blank in the same direction and that's it - you'll have a three sided square section baluster - I only needed them three sided as they were glued on the stern gallery but you can do them four sided if you need.

Another tricky part was doing the balusters that were placed at different angles (increasing angles) like those in the last picture.

 

For those first and third sides (side views) were cut (filed) perpendicular on the template but the second (front view) has to be in an increasing angle. In order to do that, the filing of the second side has to be at an angle which required the baluster blanks to be a bit shorter (say 23mm instead of 25). Here are the steps:

 

  1. ​place the blank in the jig as before aligned with the left side (future top of balusters). This will produce a small gap (2mm) at the other end.
  2. file first side perpendicular as before
  3. place the blank exactly as in step one for the second side
  4. file de second side in an angle bigger than 90 say about 100 degree (I estimated the angles trying to increase them for subsequent ones by trial and error) considering it from the left side (baluster top). Be careful to du all the "cuts" at the approximately same angle. After scraping several I got the hang of it.
  5. unclamp and turn the blank (always in the same direction) but this time it has to be shifted a bit to the right - depending of the angle you did the filing - say 1 mm in this case to be able to align the notches on the second side with those on the template, clamp back.
  6. shape the third side perpendicular again as the first one
  7. you're done you just have to cut it at the required length to fit the space you need it for.

 

Hope this lengthy explanation is clear enough. If not just ask.

 

Regards Alexandru

post-540-0-81619000-1470341748_thumb.jpg

post-540-0-48018800-1470341750_thumb.jpg

post-540-0-17197300-1470341754_thumb.jpg

post-540-0-78398600-1470341771_thumb.jpg

post-540-0-81565500-1470341773_thumb.jpg

post-540-0-61458000-1470341782_thumb.jpg

post-540-0-89001100-1470342763_thumb.jpg

For all my builds please visit my site at: http://www.AlexShipModels.com

 

Previous builds

 

Link to comment
Share on other sites

Alexandru,

Thank you for the detailed explanation! I really appreciate you taking the time to fix your old computer to get the photos and then providing such a detailed explanation!  I've been wondering how to tackle this for quite some time.  You really nailed the stern.

 

 I'm just amazed with your work.  It was a pleasure to follow and I continue to go back to again and again for inspiration!

thanks for sharing with us!

 

 

Marc

Edited by keelhauled
Link to comment
Share on other sites

  • 4 weeks later...

I have been building a 1:60 scratch model of the H.M.S. Victory for the past 12 years.  I am ready to start on the stern structure and this was very helpful.  I have essentially completed the hull (inner planking, frames, outer planking and coppering), but was delaying the stern section until I prepared the rest of the hull structure due to its relative fragility.  I have left two segments in the starboard hull open so that the viewer can see the ship's interior.  I have almost completed the hold with the filling room, great magazine, light room, pump room, etc. and have filled it in will various barrels, casks, powder barrels, bags, and other nautical gear to demonstrate actual use.  I am just about completed the hold and am ready to build in the orlop deck now with the hanging magazines, sail room, etc.  I have left part of the decking out so that the viewer can see the ship's interior for key areas (e.g., magazine, pump room, etc.).  I generally only see "admiralty models" in the museums, so it was interesting to see the frames and half-frames of your model that reflect the actual mode of construction.  Well done.  I have used a similar approach and look forward to working on the stern with the aid of your photos of the stern section.  THANKS!

Link to comment
Share on other sites

  • 2 weeks later...

That nameplate is perfect and puts a very nice touch on a stunning display, Alexandru.  Congratulations on getting her into the case.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Link to comment
Share on other sites

  • 3 years later...
  • 2 years later...
On 10/20/2014 at 1:42 AM, guraus said:

...

post-540-0-97512000-1413754943_thumb.jpg

post-540-0-76873600-1413754946_thumb.jpg

post-540-0-31228800-1413754949_thumb.jpg

post-540-0-50285100-1413754951_thumb.jpg

post-540-0-83288100-1413754953_thumb.jpg

post-540-0-67253900-1413754955_thumb.jpg

Hello! Congratulations, you are creating rigging. Wings of the ship! I just allowed myself to assume that you will make the masts and yards as real, consisting of parts .... True, this may be unnecessary. And probably too hard. I'm just thinking out loud, your work is great. Congrats, it's a beautiful ship...

Link to comment
Share on other sites

On 7/13/2016 at 1:59 AM, guraus said:

Thank you all for the kind words and appreciation.

 

 

 

Isalbert,

 

I thought about that, I even made the main mast but when I dry fit it into the model, the size of it scared me. The model is big anyway and with lower masts would have gain a lot in height  - so much that it won't fit in my car anymore and be really difficult to even take out from my basement where my workshop is.

 

So I decided to not do any masts on the Victory, and to reuse the already made mast for another project. Additionally the custom made display box I ordered was made for the model without masts - and I payed a lot for it. To all this add the fact that I am working on this model for more than 9 years so I really needed a change - thus the decision to stop were I am and call it "done". There are a lot of other small details I could have done on it as it is (without increase in size) but in the end I decided not to.

 

Alexandru

You right! I understand you!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...