Jump to content
New Publication - Ship Modeler's Handbook - They're back in stock! Thank you for your patience. ×
BlueJacket Shipcrafters 10% off sale-April14th to 25th, all the kits we offer will be 10% off. No need to use special codes, it will be automatic when you place your order by phone, web, email, snail mail or in person. Put your tax refund to good use! ×

Canute

NRG Member
 View Profile  See their activity

  • Posts

    6,135

  • Joined

  • Last visited

 Content Type 

Everything posted by Canute

  1. Canute
    Don't think that's correct about Mamoli being out of business. They were shut down due to a fire last year, but are back in operation. I just can't cite exactly where I read it here on MSW.
  2. Canute
    Yeah, tough life for a squirrel. Like we keep saying, this ain't no race. Read a little, converse with the squirrels, talk to Junior, mull your moves before launching off a tree branch, Rocky.
  3. Canute
    Ah, schmeckt zehr gut! Although, you might have enjoyed a Bitburger Pils with what looks like sauerbraten. But, that's just me. Three years in the Eifel affects you that way.
  4. Canute
    Matt, I really like the lines of the Ranger. I'm pulling up a chair in the front row to watch this build.
  5. Canute
    I'm the newbie here, so all I can say is WOW. Your workmanship and perseverance is superb. My hat's off to you. Cheers!
  6. Canute
    Jonny, any model train shops near you? They may have some brass wire in stock. We have an outfit called Detail Associates (DA) that makes round brass wire. If my ciphering is correct, 1mm equals .040 inches and DA carries that size. They go all the way down to .006 inch wire.There are other brands, too. Maybe try a local hardware store, too. Staring at the screen like that does a number on your eyes. Back when PCs were new (mid 80's), we had monochrome amber screens. I had to do data entry for my unit's weapons scores. If I spent more than a half hour doing that, I'd get bleary eyed. The other Weapons officer wore his sunglasses to do entries, it bothered his eyes so much. The CO thought we were daft, but our inspection results were always top notch, so he humored us.
  7. Canute
    Matt, my Italian Gramma did that kind of beautiful work. I have 2 pieces for putting under lamps, inherited from my Mom. Sis got all the rest of the handiwork. That is some beautiful work! And as Keith says, it makes a lot of sense that Captain Bligh would carry the barricoes that way. They keep liquids in, so they can also keep salt water out. I work with a lady who crochets. Maybe I can talk her into doing something like this.
  8. Canute
    Scott, excellent work installing all those knees.And nice camera work, shooting through the gunports.
  9. Canute
    Dang, I nearly swallowed my gum! A three decker Twould be a rather largish chunk. Your launch does look good. Congrats. And I'm drawn to that paddle wheeler, too;since it's around the American Civil War time frame I'm fond of.
  10. Canute
    Nice mill-work, paisan.
  11. Canute
    May the squirrel gods watch over you when you do that deed.
  12. Canute
    Looking good, Jon. Keep after it. As far as adding light, you almost can't have too much, especially as we get older. When I went into the AF at age 20 or so, I was Hawk-eye, 20/10 or so. Twenty some odd years later, I flunked the vision part of a flight physical. I needed glasses! The more light, the easier it is for the eyes to adapt. Nowadays, I wear glasses and work under 2 pretty bright lights, one with a magnifying lens built in. That setup helped me when my train club built an N scale diorama for the local county historical museum. I could build laser cut, double hung wood windows with sashes and panes. They were 6 mm by 11 mm. I swore off working in that scale, with that level of detail, after that.
  13. Canute
    Matt, I like the idea of a captures ship conversion. Very interesting premise. That being said, I hope you are not planning to impart cannon damage with anything much more than an air-powered BB gun. I have a little experience with assorted weapons. Gunpowder puts lots of oomph behind a given projectile. Remember blowing up plastic ships with firecrackers? This kit could turn into your first scratchbuild, if you get too exuberant. Be careful, brother.
  14. Canute
    Matt, what's the bash part entail?
  15. Canute
    Buck, I know of what you speak. I want to start selling off my slew of plastic ships. I don't see me building any of them. Makes room for "others", like a Syren or Granado. Or getting some new tool goodie, like a lathe or thickness sander. Ah, well, I can dream...
  16. Canute
    If I had a ramp, maybe. The snow is rotten, very thin. But the crust is glare ice. I've a few friends go down with broken wrists and shoulders, thanks to this ice. I'm not a fan of CA, though I have built a wooden freight car or 2 with some medium thick stuff. I use various CA thicknesses on resin, metal/wood, no problem. Wood to wood, I like to use yellow glue. It sets up in less than half an hour and if I screw up (or is that when?), I can undo it with isopropanol. I was pretty careful marking the hood end locations in the stem rabbet, if you look closely at that in my last picture. The garboard does hang past the transom, but not by much. I want to finesse that plank in it's place.
  17. Canute
    Go Speed Racer Go! Wait a minute, better start a new log, Matey! I do like cutters, though. Sleekness. Better get an Italian English dictionary, while you're at it. Although, in looking at the Mamoli instructions for my Connie section, you may just stick with the drawings.
  18. Canute
    Hornet, I've used a cutting mat for years. Cut wood, plastic, card stock on it. And they're a little insurance, too. Spilled glues and paints on it. Cleaned up OK. I think the mat will protect your blades better than the melamine. Try out a half page or page size. They're not too dear.
  19. Canute
    I checked the configurations of 4 of my knives (3 Xacto, 1?). All my Xactos are single slot and hold blades well. The mystery handle is an X config., but I use it for chisel blades (#17s, I believe).
  20. Canute
    Phil, almost any wood or plastic I cut over a 1/16 thick, I saw cut, usually in a miter box. I own 2 choppers (One a NWSL , the other, some knock-off ) and they're great for thin stock. Cutting anything over that 16th, I find the blade deflects and the cuts get out of wack. Hence the saw/miter box combo. It's essentially a hand powered chop saw. Might save you a few trips to the True Sander. And balsa is very tough to cut, way too soft. I might use it internally to hold a structural shape, but it's too weak to use anyplace else.
  21. Canute
    Gimo, I like the way you've bent up the deck beams. This seems a more positive way of imparting the required curvature to the beams. Bravo.
  22. Canute
    Well, as I was looking over the frames last night, I saw that I had to redo one, due to a crack right in the bend. No way I could sand it up and make it work. Redid that frame and began transferring the plank lines from the mold bulkheads onto the outer faces of the frames.Skinny marking square works well for that. This morning, I boiled up my port garboard and sheet planks. I think I have a good bend on the garboard; lines up with my pencil lines on the stem. I had a little problem holding the sheer plank to the stem. Seems the clamp I was trying to use had a taper on the tip, so I grabbed a metal binder clip to hold the plank. Bending the garboard and sheer. Faulty clamp. It has a taper reversed to what I needed. Not really a bad clamp. The fix. You can see the pencil ticks for the hood ends in the rabbet on the stem. I think I'm going to get and make up more of those little binder clips before I launch off into actually gluing my planks up. My driveway may defrost by Sunday night and I won't have to do a slalom course to get down.
  23. Canute
    Tuff, Tadeusz showed some pictures of HMS Victory's copper plating in a log: http://modelshipworld.com/index.php/topic/9520-decision-timeto-copper-or-not-to-copper/?hl=%2Bcoppering+%2Bhulls#entry282136. It's the 8th entry.
  24. Canute
    Squirrel Whisperer, outstanding look for those tools! I'll have to pop over to my local gun shop and "git me sum". And which black paint? I have some Floquil Weathered Black, but that will get used up or dried out one of these days. You continue to amaze me, every time I open your log. Well Done!
  25. Canute
    Jack, very nice work. Looks very good.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...