dafi

Do not worry Andy, I did not steal Kevins properties ;-) This is how it looks if Fimo/Milliput is baked with 230° Celsius instead of 110° as blind dafi got confused by the english temperature beside the german writing and vica versa ... ... nicely black and blown up ... .... so got the Fimo out again ... ... first the ball, then the thick sausage, then a medium sausage of 4 mm with the use of a small sheet with 4 mm spacers, and then the thin sausage of 3 mm with the flipside ot the tool with 3 mm spacers. Afterwards I used a "comb" with small wires in 2 mm distance to roll in the 7 lashings representing the 7 seas ... ... then bent the parts, distributed it on the oven plate and baked on the right tempersture. Funny to see the bloated black been beside. And I got a nice stack of rolled hammocks :-) Then filed the touching surfaces ... ... glued the parts together while paying tribute to gravity in the middle of the nettings. This is still the rough version, paint will be easy, but the netting will still need some fiddling around to be figured out properly ... All the best, Daniel

Thank you for your intrest and your great support! ...hihihihihihi... ...hohohohohoho... ... looks like dafi entered the coffee roasting business too ... ...hihihihihi... XXXDAn

Wonderful work, Daniel

Hello wefalck, the best material I found so far is a tulle from the craftshop for decorating presents and flowers. it comes in 50 mm width. The tulle from the cloth department usually has a hexagonal shape and is therefor not a very good choice. Luckily this one has the needed square/rhombic shape but is a little bit sturdy and difficult to color. I already did some tests on the heads and it proved to be quite good down there. I made a jig to give it a frame and to paint it properly. Afterwards it was sewed on. It gets a bit the wanted unevenness of the original. Also applied on the fighting tops. But I do not know yet how this will be applied on the hammock cranes properly, still have to use my brains a tad ... Amicalement, Daniel

Thank you all, so finally a new version, 30 cm diameter and 180 cm length. And the bend shows up - great hint from wefalck for no rain or spray can be collected in there. Looking more reasonably? XXXDAn PS: Just to make shure: The netting is still missing on purpose ;-)

Hello everybody, thank you for your feedback :-) @Guy: Yes it worked rather well with the hair pins. If not just look for something stronger that does not squeeze the rope too much. Daniel

Hello Mitch, I already used the wood-on-plastic method on my Vic. Look here: #9 #62 All the best, DAniel

simply wonderful! Daniel

Hello Patrik, this would be the other way round than the Belle Poule ... Daniel

Thank you wefalck, this is one of my questions. The hammock rolls in Bradys book and in the pictures of the american Navy look rather sturdy. Was it possible to bent them like into U-turn? DAniuel PS: It was meant to be children´s clay :-) I corrected it, thank you.

Thanks Dennis. Just for testing purposes: Children clay, made rolls of 3,5 mm, long about 19 mm and taking a glimpse how this could look in the cranes. Could this be ok like this? What were original length and diameter of the sausage? The securing was done by 7 marlin hitches representing the seven seas. Lieber Gruß, Daniel

Did not have too much time lately, but today managed to do a tiny-tiny bit :-) First lashed the guns as defined by the Navy Board ... ... then tried out the hammock cranes ... ... and with connecting rope ... ... :-) XXXDAn

Nice work, and lovely to see a yellow version :-) Daniel

Great work Gary, a pleasure to see!, Daniel

Thanks Popeye, and Dirk it is quite interesting and intriguing to see the difference on the gun port lid fittings as soon as you look closer. That each lid has his own and unique form is quite well known: the curve of the deck, the cutting though the whales and the doubling of this planking in combination with the vertical frames. Also the Navy-Board defined the size of the gun ports by the calibers. But just the intended ones while building so that a later change in ordonance was leading to inconsistencies in the caliber/size ratio. Also the details are interesting. Todays Vic in P shows five different versions. - The lower deck has the small build in vent scuttles. For practical reasons I do believe, that the hinge should point forwards, for that waves slamm this small lid close and no open. So we have a starboard and port version. Two lanyards and two eyebolts on the inside for good and secure lashing when shut - The middle deck is much the same, with no vent scuttles: Also two lanyards and two eyebolts on the inside - The upper gun deck had much smaller ports, here we have two lanyards and just one eyebolt on the inside - The Lids on the quarter deck cabins have two versions: - the classical lid with just one lanyard and also one eyebolt on the inside - and the half lids opening sideways in the area of the channels too protect the deadeyes from the fire (if I understood right) Yes Dirk, thank you, no matter the material one uses, with a little bit of soul applied it could look like this: Cheers, Daniel

The decoration of the guns changed frequently. In the Navy the guns got the monogram of the king ruling at the moment of it´s cast. In front of the museum in Vienna (Heeresgeschichtliches Museum Wien) there are severeal dozen of great brass guns, plenty of french origin: all are different in design and decoration. Perhaps it is possible to find one form that could be the closest to a certain type that would be not wrong to be used as a general type. DAniel

Thank you Eddie your wish is my command :-) In the meantime I did some more shots for the assembly instructions, that I don´t wont you to withhold from you .. The flaglockers ... ... the new bucket holders with longer handles ... ... and the buckets in place. The funnel has a better appearence by now ... ... as the new gratings have :-) The gunport fittings were fixed with double sided tape onto the table. The fittings were glued on using the connection bit ... ... a needle pricks the hole ... ... for the rings ... ... and here all versions with the required number of inside rings. Interesting are the lids in the very front and back ... ... very tilted :-) Holding the lid inside the port, sliding slightly downwards, using the needle to mark the holes, drill them with 0,5 mm, plug in ... ... and done :-) The fittings need to be shortened on the top, but I needed it for the open versions. And now the two top decks, once closed ... ... and once opened with the gun behind. Have a good night, Daniel

Nice build, love it, great details. The "squaere" hammocks are called cods if I am not mistaken, and usually for officers and on the V in P also in the sic bearth. "Normal" sailors used simple hammocks - just the cloth with the strings on the end. #16 #15 Daniel

Hello Chris, wonderful kit and thanks for explaining. I know the problem in between being historically correct and the people comparing to todays Vic pictures: Where are the plumes??? ... As I also often looked at this model, I found many "odd" features about it, especially the in the bow section. Do you have any ideas/hints/proves to where this model came from? Was it "as repaired", was it a pure study or "as planned"? There are several models in NMM all to be around the same time and all off them being completely different ... Also interesting to see the stern on pictures of about 1880/1900 Best regards, Daniel

I think the older version was red. Somewhere about 1800+/- it was changes into yellow ochre. Anybody more precise details? XXXDAn

Nice work :-) Daniel

I think I will still have to come to the decals topic one day too - the fire buckets on the poop are still waiting ... Something I did not show yet properly that could be beneficial too for other scales and ships are the plate of eyebolts and hooks ... ... and one with extra fine gratings for the launches ... ... the backside of course with the visible battens ;-) Cheers Daniel

Oh year the Revell Cutty, did this one too when I was twelve. I was proud like a pair of socks in those days because of the painting I did and which I found IMPACCABLE ... ... ... ... ... and some Vic-business from those glorious days ... ... ... ... ... XXXDAn

Hy Mark, good luck for the planking :-) Looks great so far! Daniel

Thank you Mark and Popeye! Soemething small went ahead. That is why the etch orgy originally started: I could not find enough Xs and Vs ... ... still needs a touch of copper paint. The upper ones prebent ... ... and used a new technic to fix them: Glue the parts face down onto tape and use spray glue for the back ... ... prefixed on place and finally fixed by applying extra liquid CA with a tooth pick. Thanks to Bosco/Nicolas and his Richelieu for this tip. http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=75145&hilit=richelieu&start=320#p536001 http://www.shipmodels.info/mws_forum/viewtopic.php?f=60&t=149513&hilit=richelieu XXXDAn