Jump to content

aviaamator

Members
  • Posts

    709
  • Joined

  • Last visited

Posts posted by aviaamator

  1. Captain Al! The answer to Your question: first I wanted to make the frames from thin strips glued to the block. To do this, made templates of the frames of two halves which are fastened with pins. Using a router made a groove in each half of the pattern. This groove laid thin planks greased with glue, secured with screws. After drying, the glue will get here are half frames. But after much reflection, I abandoned this technology, and used the old tried and tested method of building models which I've used previously. Where shaded black color - must be removed, it turned out symmetrical groove.

    post-18265-0-72779300-1465574000_thumb.jpg

    post-18265-0-83768600-1465574003_thumb.jpg

    post-18265-0-96803700-1465574005_thumb.jpg

    post-18265-0-71511400-1465574009_thumb.jpg

    post-18265-0-72565900-1465574013_thumb.jpg

    post-18265-0-47525100-1465574018_thumb.jpg

×
×
  • Create New...