Jump to content
MSW Spring Donation Drive

Landlocked123

Gone, but not forgotten
 View Profile  See their activity

  • Posts

    449

  • Joined

  • Last visited

 Content Type 

Everything posted by Landlocked123

  1. Landlocked123
    Outstanding as usual Sal. Best, John
  2. Landlocked123
    Hi Karl, I must echo all the praise on both your boat building and photography.. I do have one question; What is the material you used in the photo above to guide the saw cut and how do you attach it to the ship? Thanks,.. Best, John
  3. Landlocked123
    Hi Brian, I didn't start on the road your on until way too late. Nevertheless, I've made some changes and lost 35lbs in the last 4 months! I found the trick is to incorporate the changes you want to make into your life. If you have a bad day, or week, so what? If you try for a particular diet or workout regime, it's too easy just to let it go when you weary of it. But, in my experience, generally try to make the right choices, incorporate them into your daily practice, and everything will work out. Concentrate on the process. You will make it happen. Best, John PS. If you have the discipline and patience to build a model the quality of your AVS, the rest should be a piece of cake.....I mean carrot
  4. Landlocked123
    Thanks Ed, That is very helpful. I guess I owe you another beer!
  5. Landlocked123
    Hi Mark, Jesse nailed it!!!!! You are a vital part of this site and we're all behind you!!!!!! Best, John
  6. Landlocked123
    Hi Ed, You've left me in my usual state of befuddlement! (Usual to me, not your instruction). I guess where I'm confused is where the beeswax mixture is applied. Is it one the first stage, after sanding, but before the acrylic? I would think the wax would interfere with adhesion of the later layers of finish? Would you please lay out the finishing process in a more linear fashion? Thanks, John
  7. Landlocked123
    George, I'm sure you're right re opiates, but I'm hyper-sensitive to the issue. My boss's 20 year old son overdosed on OxyContin about a year ago. He was a great, smart, and funny kid and I still miss him. He started out on the pain killers due to a football injury in High School. Best, John
  8. Landlocked123
    Hi Mark, I've missed you as well and pray for Janet's speedy recovery. I'm sure you know, but try to be careful if their "pain management" techniques involve a lot of opiates. They can be a lot of trouble in the long run, even the the short run for that matter. Please be careful. Warmest regards, John Ps. George, my wife is a lot more stoic than I......when I'm in pain, I play it up to the hilt.
  9. Landlocked123
    Hi Tony, I also have a Dremel 580. I've tried to improve it with some after-market products from Bill on E-bay in Florida. His workmanship and customer service is outstanding. I've bought his fence, mitre gauge, slip-free belt and gears, and backing plate ( not yet installed). But the saw is still not suitable for ripping accurate timber for planking or decking. What is the Accurizer you mention? Is it still available? Would it solve my problems? At this point I think I could sell the Dremmel with the accessories and come out even. I then wouldn't be to far from buying a Byrnes saw. What do you think? Thanks, Best, John
  10. Landlocked123
    Hi Ed, In this and your other builds you use pins to keep things in place while gluing. Do you pre-drill the pin holes? Also, when I've tried to use pins while gluing, I've found I need to use excessive pressure to pull them out. Am I missing something? Do you then go back and fill up the holes? Thanks, Best, John
  11. Landlocked123
    Hi Jules, I'm looking forward to following your build. I'd wish you the best of luck, but somehow I don't believe you'll need luck as much as perserverance. Best, John
  12. Landlocked123
    Thanks Chuck, I'll give them a try. Best, John
  13. Landlocked123
    Hi Guys & Gals. I've been looking for brass tubing with a .020"" ID. I've looked in a few catalogs as well as the K&S stands at local shops. No luck. Does anyone have an idea of where I might find some? Thanks. Best, John
  14. Landlocked123
    Jud, That sounds like the kind of good advice one can't find other than on MSW. Thanks Best, John
  15. Landlocked123
    And don't forget the sea gulls and what they do!
  16. Landlocked123
    Hi, What would you guys recommend as a very "white" wood which bends relatively well. I will soon be starting the MS New Bedford Whaleboat which I do not plan to paint. I'm looking for some contrasting woods. For the "gunwale strakes" I am planing on cherry or walnut and would like the frames to be in high contrast. Any ideas? Best, John
  17. Landlocked123
    Absolutely beautiful Sal. Way to go!
  18. Landlocked123
    Hi Diwang, I'm just a novice. However, I know that Nic is a master builder with a special expertise in rigging. He also runs one of, if not the best, manufacturers of extremely high quality model ship kits in the world. Felted or not, there were about 14 people in the round table with me, and he definitely showed that there was some kind of orientation to the fibers he was using and it was a "best practice" to sandwich the sheets 90 degrees to each other. I also agree with Brian, if you have a "practicum" on sail making, why not share it with all of us? John
  19. Landlocked123
    Congratulations Brian, Not only Is the ship incredible but your build log is one of the best on MSW. Bravo! Best, John
  20. Landlocked123
    Hi Julie, I think you might be putting the "cart before the horse" a bit. Nevertheless, at the NRG conference a couple of weeks ago I attended a fabulous sail making workshop run by Nic Damuck from BlueJacket Ship Crafters. He showed a very simple and effective way to create sails. Using Silkspan (a specialty fabric used by radio controlled airplane builders) he created very realistic sails. Silkspan is very light and somewhat translucent. It also has a barely noticeable weave. Nic drew a sail pattern on one sheet using pencil, then using watered down white glue, he sandwiched that between two more sheets with the weave at a 90 degree angles. Then, very carefully worked out any air bubbles. He then trimmed it to shape with scissors, placed it over a frame (of coat hanger wire) contoured in such a way that when the sail dried it mantained its shape. The pencil lines in between the layers gave a very realistic and subtle impression of the panels comprising a sail. To me the most important aspect was that the sails appeared to scale. Best, John
  21. Landlocked123
    Hi All, Ther way I see it, is that given this is Sal's second build, he is mere steps away from Danny V., Remco, EdT and some of the other great builders on this site! Best, John
  22. Landlocked123
    Michael, You must be so proud and happy! Seeing that picture made me smile from ear to ear! Congratulations on having "built" such a marvelous family!!!!!!!! Best, John
  23. Landlocked123
    Hi Sal, I totally echo George's sentiments and when I saw the pics the first thing I thought was SWEET!!!. I hope you bring it on 11/14, I'd love to see it in person. Best, John
  24. Landlocked123
    Hi Druxey, After you cut or file the profile, does it need to be sharpened? And if so, how do you do it? Thanks. Best, John
  25. Landlocked123
    Hi Ed, At various times in your different build logs you use something which looks like a cross between a rasp and a file. Would you please share the name of the tool and where I might find them? Thanks, Best, John

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...